at91: fixed at91sam9263 system file
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
index deda3e5..15e880a 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
@@ -3,7 +3,7 @@
* Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2011
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* esd electronic system design gmbh <www.esd.eu>
*
@@ -27,78 +27,59 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */
- writel(1 << AT91SAM9263_ID_US0, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */
- writel(1 << AT91SAM9263_ID_US1, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */
- writel(1 << AT91SAM9263_ID_US2, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9263_ID_SPI0, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
@@ -128,14 +109,14 @@
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9263_ID_SPI1, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
@@ -203,12 +184,12 @@
#ifdef CONFIG_AT91_CAN
void at91_can_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */
at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */
/* Enable clock */
- writel(1 << AT91SAM9263_ID_CAN, &pmc->pcer);
+ writel(1 << ATMEL_ID_CAN, &pmc->pcer);
}
#endif