imx53: synchronise device tree with linux
Synchronise device tree with linux v6.0-rc1.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/dts/imx53-m53menlo.dts b/arch/arm/dts/imx53-m53menlo.dts
index 3767dca..d5c68d1 100644
--- a/arch/arm/dts/imx53-m53menlo.dts
+++ b/arch/arm/dts/imx53-m53menlo.dts
@@ -5,12 +5,30 @@
/dts-v1/;
#include "imx53-m53.dtsi"
-#include "imx53-m53menlo-u-boot.dtsi"
/ {
model = "MENLO M53 EMBEDDED DEVICE";
compatible = "menlo,m53menlo", "fsl,imx53";
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pinctrl_power_button>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power button";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pinctrl_power_out>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -31,27 +49,60 @@
eth {
label = "EthLedYe";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
+ linux,default-trigger = "netdev";
+ };
+ };
+
+ lvds-decoder {
+ compatible = "ti,ds90cf364a", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_decoder_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_decoder_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
};
panel {
- compatible = "edt,etm070080dh6";
+ compatible = "edt,etm0700g0dh6";
+ pinctrl-0 = <&pinctrl_display_gpio>;
+ pinctrl-names = "default";
enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_decoder_out>;
};
};
};
+ beeper {
+ compatible = "gpio-beeper";
+ pinctrl-0 = <&pinctrl_beeper>;
+ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+ };
+
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio1 2 0>;
};
};
@@ -75,6 +126,25 @@
assigned-clock-rates = <133333334>, <33333334>, <33333334>;
};
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ spidev@0 {
+ compatible = "menlo,m53cpld";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+
+ spidev@1 {
+ compatible = "menlo,m53cpld";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+ };
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
@@ -86,19 +156,81 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
- phy-handle = <ðphy0>;
phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
status = "okay";
+};
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
+&gpio1 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "TestPin_SV2_3", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+ "", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "CPLD_JTAG_TCK", "KBD_intK",
+ "CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+ "CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+ "CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "", "", "", "",
+ "CPLD_reset", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio7 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "USB-OTG_OverCurrent", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
};
&i2c1 {
@@ -148,27 +280,37 @@
imx53-m53evk {
hoggrp {
fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
- MX53_PAD_EIM_EB3__GPIO2_31 0x1d5
- MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5
- MX53_PAD_GPIO_19__CCM_CLKO 0x1d5
- MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5
- MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5
- MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5
- MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5
- MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5
- MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5
- MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5
- MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5
- MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5
- MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5
+ MX53_PAD_GPIO_19__CCM_CLKO 0x1e4
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4
+ MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4
+ MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4
+ MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4
+ MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4
+ MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+ MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+ MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4
+ MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4
+ MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
- MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5
- MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5
+ MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4
+ >;
+ };
+
+ pinctrl_beeper: beepergrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4
>;
};
@@ -181,49 +323,66 @@
pinctrl_can2: can2grp {
fsl,pins = <
- MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4
MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4
>;
};
pinctrl_display_gpio: display-gpiogrp {
fsl,pins = <
- MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */
- MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */
+ MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */
+ MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */
+
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */
>;
};
pinctrl_edt_ft5x06: edt-ft5x06grp {
fsl,pins = <
- MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */
- MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */
- MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */
+ MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */
+ MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */
+ MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4
+ MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4
+ MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4
+ MX53_PAD_EIM_RW__GPIO2_26 0xe4
+ MX53_PAD_EIM_LBA__GPIO2_27 0xe4
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4
+ MX53_PAD_GPIO_1__GPIO1_1 0x1c4
+ MX53_PAD_GPIO_9__GPIO1_9 0x1e4
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x4
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+ MX53_PAD_FEC_MDC__FEC_MDC 0x1e4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
>;
};
@@ -252,10 +411,24 @@
>;
};
+ pinctrl_power_button: powerbutgrp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4
+ >;
+ };
+
+ pinctrl_power_out: poweroutgrp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4
+ MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4
>;
};
@@ -263,13 +436,25 @@
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4
+ MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_usb: usbgrp {
fsl,pins = <
- MX53_PAD_GPIO_2__GPIO1_2 0x1d5
- MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5
+ MX53_PAD_GPIO_2__GPIO1_2 0x1c4
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4
+ MX53_PAD_GPIO_4__GPIO1_4 0x1c4
+ MX53_PAD_GPIO_18__GPIO7_13 0x1c4
>;
};
};
@@ -290,7 +475,7 @@
reg = <2>;
lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
+ remote-endpoint = <&lvds_decoder_in>;
};
};
};
@@ -299,12 +484,21 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ linux,rs485-enabled-at-boot-time;
status = "okay";
};
@@ -313,7 +507,7 @@
pinctrl-0 = <&pinctrl_usb>;
vbus-supply = <®_usbh1_vbus>;
phy_type = "utmi";
- dr_mode = "peripheral";
+ dr_mode = "host";
status = "okay";
};