dm: rpi: Move serial to driver model
Adjust the configuration to use the driver model version of the pl01x
serial driver. Add the required platform data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 51a4fa1..7dbd40e 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -24,6 +24,7 @@
#include <asm/arch/mbox.h>
#include <asm/arch/sdhci.h>
#include <asm/global_data.h>
+#include <dm/platform_data/serial_pl01x.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -36,6 +37,17 @@
.platdata = &gpio_platdata,
};
+static const struct pl01x_serial_platdata serial_platdata = {
+ .base = 0x20201000,
+ .type = TYPE_PL011,
+ .clock = 3000000,
+};
+
+U_BOOT_DEVICE(bcm2835_serials) = {
+ .name = "serial_pl01x",
+ .platdata = &serial_platdata,
+};
+
struct msg_get_arm_mem {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 4d5426e..c94f411 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -34,6 +34,7 @@
#define CONFIG_DM
#define CONFIG_CMD_DM
#define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
/* Memory layout */
#define CONFIG_NR_DRAM_BANKS 1
@@ -51,6 +52,7 @@
CONFIG_SYS_SDRAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_4M
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
#define CONFIG_LOADADDR 0x00200000
@@ -92,9 +94,7 @@
#endif
/* Console UART */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 3000000
-#define CONFIG_PL01x_PORTS { (void *)0x20201000 }
+#define CONFIG_PL01X_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200