sandbox: Move CONFIG_SYS_I2C_SANDBOX to Kconfig
Move this over to Kconfig and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher<hs@denx.de>
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index efc020f..56e7deb 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -19,3 +19,4 @@
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SANDBOX_GPIO=y
CONFIG_SYS_VSNPRINTF=y
+CONFIG_SYS_I2C_SANDBOX=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 739badc..ba43019 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -28,6 +28,36 @@
bindings are supported.
Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
+config SYS_I2C_SANDBOX
+ bool "Sandbox I2C driver"
+ depends on SANDBOX && DM_I2C
+ help
+ Enable I2C support for sandbox. This is an emulation of a real I2C
+ bus. Devices can be attached to the bus using the device tree
+ which specifies the driver to use. As an example, see this device
+ tree fragment from sandbox.dts. It shows that the I2C bus has a
+ single EEPROM at address 0x2c (7-bit address) which is emulated by
+ the driver for "sandbox,i2c-eeprom", which is in
+ drivers/misc/i2c_eeprom_emul.c.
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <400000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <128>;
+ };
+ };
+ };
+
+
config SYS_I2C_UNIPHIER
bool "UniPhier I2C driver"
depends on ARCH_UNIPHIER && DM_I2C
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index f714298..30d41e5 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -95,7 +95,6 @@
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SANDBOX
#define CONFIG_I2C_EDID
#define CONFIG_I2C_EEPROM