stm32mp1: select boot device and partition
Bootrom loads SPL from SDCARD or eMMC
according BootPin selection.
Then SPL loads U-Boot on the same mmc device
with the following predefined GPT partitioning:
on SDCARD: gpt partitioning
1: SPL
2: SPL#2
3: U-Boot
4: bootable partition
on eMMC:
The 2 boot partitions are used for SPL (2 copy)
boot1: SPL
boot2: SPL#2
The user partition use gpt partitioning
1: U-Boot
2: bootable partition
This patch select the correct SPL partition
(3 for SDCARD on mmc0 and 1 for eMMC on mmc1)
according the BootRom information saved in TAMP register
and based on configuration flasg:
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
=> for BOOT_DEVICE_MMC1 or mmc 0 in U-Boot
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2 (new)
=> for BOOT_DEVICE_MMC2 or mmc 1 in U-Boot
And the correct boot_targets is selected according the environment
variables boot_device and boot_instance, with preboot command,
to search the bootable partition with kernel on this device
(generic distro support).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 8c755f8..9771af9 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -38,6 +38,14 @@
when DDR driver is used:
DDR + 1MB (0xC0100000)
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
+ hex "Partition on MMC2 to use to load U-Boot from"
+ depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ default 1
+ help
+ Partition on the second MMC to load U-Boot from when the MMC is being
+ used in raw mode
+
source "board/st/stm32mp1/Kconfig"
endif
diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c
index 8f5962a..bfb3e50 100644
--- a/arch/arm/mach-stm32mp/spl.c
+++ b/arch/arm/mach-stm32mp/spl.c
@@ -7,9 +7,27 @@
#include <common.h>
#include <dm.h>
#include <spl.h>
+#include <asm/io.h>
u32 spl_boot_device(void)
{
+ u32 boot_mode;
+
+ boot_mode = (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
+ TAMP_BOOT_MODE_SHIFT;
+ clrsetbits_le32(TAMP_BOOT_CONTEXT,
+ TAMP_BOOT_MODE_MASK,
+ boot_mode << TAMP_BOOT_MODE_SHIFT);
+
+ switch (boot_mode) {
+ case BOOT_FLASH_SD_1:
+ case BOOT_FLASH_EMMC_1:
+ return BOOT_DEVICE_MMC1;
+ case BOOT_FLASH_SD_2:
+ case BOOT_FLASH_EMMC_2:
+ return BOOT_DEVICE_MMC2;
+ }
+
return BOOT_DEVICE_MMC1;
}
@@ -18,6 +36,18 @@
return MMCSD_MODE_RAW;
}
+int spl_boot_partition(const u32 boot_device)
+{
+ switch (boot_device) {
+ case BOOT_DEVICE_MMC1:
+ return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION;
+ case BOOT_DEVICE_MMC2:
+ return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2;
+ default:
+ return -EINVAL;
+ }
+}
+
void board_init_f(ulong dummy)
{
struct udevice *dev;