powerpc: change 86xx SMP boot method
We put the bootpg for the secondary cpus into memory and use
BPTR to get to it. This is a step towards converting to the
ePAPR boot methodology. Also, the code is written to
deal properly with more than 4GB of RAM.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
diff --git a/cpu/mpc86xx/mp.c b/cpu/mpc86xx/mp.c
new file mode 100644
index 0000000..5014401
--- /dev/null
+++ b/cpu/mpc86xx/mp.c
@@ -0,0 +1,68 @@
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <ioports.h>
+#include <lmb.h>
+#include <asm/io.h>
+#include "mp.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (CONFIG_NUM_CPUS > 1)
+void cpu_mp_lmb_reserve(struct lmb *lmb)
+{
+ u32 bootpg;
+
+ /* if we have 4G or more of memory, put the boot page at 4Gb-1M */
+ if ((u64)gd->ram_size > 0xfffff000)
+ bootpg = 0xfff00000;
+ else
+ bootpg = gd->ram_size - (1024 * 1024);
+
+ /* tell u-boot we stole a page */
+ lmb_reserve(lmb, bootpg, 4096);
+}
+
+/*
+ * Copy the code for other cpus to execute into an
+ * aligned location accessible via BPTR
+ */
+void setup_mp(void)
+{
+ extern ulong __secondary_start_page;
+ ulong fixup = (ulong)&__secondary_start_page;
+ u32 bootpg;
+ u32 bootpg_va;
+
+ /*
+ * If we have 4G or more of memory, put the boot page at 4Gb-1M.
+ * Otherwise, put it at the very end of RAM.
+ */
+ if (gd->ram_size > 0xfffff000)
+ bootpg = 0xfff00000;
+ else
+ bootpg = gd->ram_size - (1024 * 1024);
+
+ if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
+ /* We're not covered by the DDR mapping, set up BAT */
+ write_bat(DBAT7, CONFIG_SYS_SCRATCH_VA | BATU_BL_128K |
+ BATU_VS | BATU_VP,
+ bootpg | BATL_PP_RW | BATL_MEMCOHERENCE);
+ bootpg_va = CONFIG_SYS_SCRATCH_VA;
+ } else {
+ bootpg_va = bootpg;
+ }
+
+ memcpy((void *)bootpg_va, (void *)fixup, 4096);
+ flush_cache(bootpg_va, 4096);
+
+ /* remove the temporary BAT mapping */
+ if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE)
+ write_bat(DBAT7, 0, 0);
+
+ /* If the physical location of bootpg is not at fff00000, set BPTR */
+ if (bootpg != 0xfff00000)
+ out_be32((uint *)(CONFIG_SYS_CCSRBAR + 0x20), 0x80000000 |
+ (bootpg >> 12));
+}
+#endif