spi_flash: support old STMicro parts with RES
Some old STMicro parts do not support JEDEC ID (0x9f). This patch
uses RES (0xab) to get Electronic ID and translates it to JEDEC ID.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 612f819..dd0dbbf 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -147,6 +147,7 @@
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO
case 0x20:
+ case 0xff: /* Let the stmicro func handle non-JEDEC ids */
flash = spi_flash_probe_stmicro(spi, idcode);
break;
#endif
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index ae0d047..21e9b00 100644
--- a/drivers/mtd/spi/stmicro.c
+++ b/drivers/mtd/spi/stmicro.c
@@ -46,6 +46,7 @@
#define CMD_M25PXX_DP 0xb9 /* Deep Power-down */
#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */
+#define STM_ID_M25P10 0x11
#define STM_ID_M25P16 0x15
#define STM_ID_M25P20 0x12
#define STM_ID_M25P32 0x16
@@ -78,6 +79,13 @@
static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
{
+ .idcode1 = STM_ID_M25P10,
+ .page_size = 256,
+ .pages_per_sector = 128,
+ .nr_sectors = 4,
+ .name = "M25P10",
+ },
+ {
.idcode1 = STM_ID_M25P16,
.page_size = 256,
.pages_per_sector = 256,
@@ -316,6 +324,19 @@
struct stmicro_spi_flash *stm;
unsigned int i;
+ if (idcode[0] == 0xff) {
+ i = spi_flash_cmd(spi, CMD_M25PXX_RES,
+ idcode, 4);
+ if (i)
+ return NULL;
+ if ((idcode[3] & 0xf0) == 0x10) {
+ idcode[0] = 0x20;
+ idcode[1] = 0x20;
+ idcode[2] = idcode[3] + 1;
+ } else
+ return NULL;
+ }
+
for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) {
params = &stmicro_spi_flash_table[i];
if (params->idcode1 == idcode[2]) {