mkimage: Set correct FDT type and ramdisk architecture in FIT auto mode
When running the following command
mkimage -f auto -A arm -O linux -T kernel -C none -a 0x8000 -e 0x8000 \
-d zImage -b zynq-microzed.dtb -i initramfs.cpio image.ub
the type of fdt subimage is the same as of the main kernel image and
the architecture of the initramfs image is not set. Such an image is
refused by U-Boot when booting. This commits sets the mentioned
attributes, allowing to use the "-f auto" mode in this case instead of
writing full .its file.
Following is the diff of mkimage output without and with this commit:
FIT description: Kernel Image image with one or more FDT blobs
Created: Thu Sep 12 23:23:16 2019
Image 0 (kernel-1)
Description:
Created: Thu Sep 12 23:23:16 2019
Type: Kernel Image
Compression: uncompressed
Data Size: 4192744 Bytes = 4094.48 KiB = 4.00 MiB
Architecture: ARM
OS: Linux
Load Address: 0x00008000
Entry Point: 0x00008000
Image 1 (fdt-1)
Description: zynq-microzed
Created: Thu Sep 12 23:23:16 2019
- Type: Kernel Image
+ Type: Flat Device Tree
Compression: uncompressed
Data Size: 9398 Bytes = 9.18 KiB = 0.01 MiB
Architecture: ARM
- OS: Unknown OS
- Load Address: unavailable
- Entry Point: unavailable
Image 2 (ramdisk-1)
Description: unavailable
Created: Thu Sep 12 23:23:16 2019
Type: RAMDisk Image
Compression: Unknown Compression
Data Size: 760672 Bytes = 742.84 KiB = 0.73 MiB
- Architecture: Unknown Architecture
+ Architecture: ARM
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Default Configuration: 'conf-1'
Configuration 0 (conf-1)
Description: zynq-microzed
Kernel: kernel-1
Init Ramdisk: ramdisk-1
FDT: fdt-1
Loadables: kernel-1
Signed-off-by: Michal Sojka <michal.sojka@cvut.cz>
1 file changed