ARM: zynq: Add partition description
Xilinx is using standard mtd partition layout for quite a long time. It is
used for testing purpose on evaluation boards.
Also #address/size-cells shouldn't be present without nodes which should
use them that's why move them from zynq-7000.dtsi to nand/nor nodes
directly.
The patch was tested on zc706 and zedboard(with also increasing max
frequency and rx bus width).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4c3348981bba32d3892194420d78fe8621c47534.1698837725.git.michal.simek@amd.com
diff --git a/arch/arm/dts/bitmain-antminer-s9.dts b/arch/arm/dts/bitmain-antminer-s9.dts
index 0228b4b..f5ad95a 100644
--- a/arch/arm/dts/bitmain-antminer-s9.dts
+++ b/arch/arm/dts/bitmain-antminer-s9.dts
@@ -52,6 +52,8 @@
&nfc0 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
nand@0 {
reg = <0>;
};
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index fb61fe9..f8c786a 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -306,15 +306,11 @@
compatible = "arm,pl353-nand-r2p1";
reg = <0 0 0x1000000>;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
};
nor0: flash@1,0 {
status = "disabled";
compatible = "cfi-flash";
reg = <1 0 0x2000000>;
- #address-cells = <1>;
- #size-cells = <1>;
};
};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 8d47f24..0106d7b 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -406,6 +406,31 @@
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "qspi-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 18963a3..ceea982 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -317,6 +317,31 @@
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "qspi-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index 17680d7..199384b 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -69,6 +69,31 @@
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "qspi-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index d1e9712..f9a086f 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -49,8 +49,27 @@
&nfc0 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
nand@0 {
reg = <0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x1000000>;
+ };
+ partition@1000000 {
+ label = "nand-linux";
+ reg = <0x1000000 0x2000000>;
+ };
+ partition@3000000 {
+ label = "nand-rootfs";
+ reg = <0x3000000 0x200000>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 6e36634..24520e7 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -56,6 +56,31 @@
&nor0 {
status = "okay";
bank-width = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "nor-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "nor-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "nor-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "nor-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "nor-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
&smcc {
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 582aa1f..add7599 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -69,6 +69,31 @@
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "qspi-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index 5320b4b..70bc418 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -55,8 +55,35 @@
flash@0 {
compatible = "spansion,s25fl256s1", "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
m25p,fast-read;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@100000 {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@600000 {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@620000 {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5e0000>;
+ };
+ partition@c00000 {
+ label = "qspi-bitstream";
+ reg = <0xc00000 0x400000>;
+ };
+ };
};
};