rockchip: gru: Allow setting up clocks in U-Boot proper
Commit fe974716326c ("rockchip: rk3288: Allow setting up clocks in
U-Boot proper") fixes some clock issues when chainloading U-Boot on
rk3288 chromebooks. Part of that change is still available in veyron's
board_early_init_r() function. Since chain-loading U-Boot proper from
vendor firmware is possible on gru boards as well, do the same thing for
them too.
On rk3399, this needs to detect whether SPL was run via handoff, so
enable that and bloblist kconfigs it needs for chromebook_bob.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
diff --git a/board/google/gru/gru.c b/board/google/gru/gru.c
index 7dfbc3a..441a1a3 100644
--- a/board/google/gru/gru.c
+++ b/board/google/gru/gru.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <init.h>
#ifdef CONFIG_SPL_BUILD
@@ -31,3 +32,25 @@
return 0;
}
#endif
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_r(void)
+{
+ struct udevice *clk;
+ int ret;
+
+ /*
+ * This init is done in SPL, but when chain-loading U-Boot SPL will
+ * have been skipped. Allow the clock driver to check if it needs
+ * setting up.
+ */
+ ret = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_GET_DRIVER(clk_rk3399), &clk);
+ if (ret) {
+ debug("%s: CLK init failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+#endif
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index 4608892..73635f0 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,6 +19,11 @@
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_SIZE=0x1000
+CONFIG_BLOBLIST_ADDR=0x100000
+CONFIG_HANDOFF=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000