ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commit:
commit 190e3138f9577885691540dca59c2f07540bde04
Merge: cafc87023b0d a7affb13b271
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Mar 27 14:58:00 2018 +0200
Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
index aef9147..2c902ed 100644
--- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10s-Olinuxino Micro";
@@ -64,6 +63,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -77,13 +87,17 @@
};
};
+&be0 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
+ pinctrl-0 = <&emac_pins_b>;
phy = <&phy1>;
status = "okay";
};
@@ -92,6 +106,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -177,8 +201,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- cd-inverted;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
status = "okay";
};
@@ -187,8 +210,7 @@
pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- cd-inverted;
+ cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
status = "okay";
};
@@ -202,38 +224,32 @@
&pio {
mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG1";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG13";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PE3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PE3";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB10";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PG12";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PG12";
+ function = "gpio_in";
+ bias-pull-up;
};
};
@@ -250,8 +266,12 @@
&spi2 {
pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>,
- <&spi2_cs0_pins_a>;
+ pinctrl-0 = <&spi2_pins_b>,
+ <&spi2_cs0_pins_b>;
+ status = "okay";
+};
+
+&tcon0 {
status = "okay";
};
@@ -263,7 +283,7 @@
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
+ pinctrl-0 = <&uart2_pins_b>;
status = "okay";
};
@@ -278,10 +298,6 @@
status = "okay";
};
-&usb0_vbus_pin_a {
- allwinner,pins = "PG11";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;