armv8: ls1088ardb: Add TFABOOT support
TFABOOT support includes:
- ls1088ardb_tfa_defconfig to be loaded by trusted firmware
- environment address and size changes for TFABOOT
- MC address changes for TFABOOT
- define BOOTCOMMAND for TFABOOT
- ifc chip select changes for TFABOOT
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 2b086da..4e6a3cb 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -89,7 +89,7 @@
config ARCH_LS1088A
bool
select ARMV8_SET_SMPEN
- select ARM_ERRATA_855873
+ select ARM_ERRATA_855873 if !TFABOOT
select FSL_LSCH3
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
@@ -98,11 +98,11 @@
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
- select SYS_FSL_ERRATUM_A009803
- select SYS_FSL_ERRATUM_A009942
- select SYS_FSL_ERRATUM_A010165
- select SYS_FSL_ERRATUM_A008511
- select SYS_FSL_ERRATUM_A008850
+ select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+ select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A010165 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+ select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_DDR4
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 4d804d9..bca9969 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -1,15 +1,18 @@
LS1088ARDB BOARD
M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
M: Ashish Kumar <Ashish.Kumar@nxp.com>
+M: Rajesh Bhagat <rajesh.bhagat@nxp.com>
S: Maintained
F: board/freescale/ls1088a/
F: include/configs/ls1088ardb.h
F: configs/ls1088ardb_qspi_defconfig
F: configs/ls1088ardb_sdcard_qspi_defconfig
+F: configs/ls1088ardb_tfa_defconfig
LS1088AQDS BOARD
M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
M: Ashish Kumar <Ashish.Kumar@nxp.com>
+M: Rajesh Bhagat <rajesh.bhagat@nxp.com>
S: Maintained
F: board/freescale/ls1088a/
F: include/configs/ls1088aqds.h
@@ -17,6 +20,7 @@
F: configs/ls1088aqds_sdcard_qspi_defconfig
F: configs/ls1088aqds_defconfig
F: configs/ls1088aqds_sdcard_ifc_defconfig
+F: configs/ls1088aqds_tfa_defconfig
LS1088AQDS_QSPI_SECURE_BOOT BOARD
M: Udit Agarwal <udit.agarwal@nxp.com>
diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c
index 78d573a..c21a2ce 100644
--- a/board/freescale/ls1088a/ddr.c
+++ b/board/freescale/ls1088a/ddr.c
@@ -111,7 +111,17 @@
DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2;
}
+#ifdef CONFIG_TFABOOT
+int fsl_initdram(void)
+{
+ gd->ram_size = tfa_get_dram_size();
+ if (!gd->ram_size)
+ gd->ram_size = fsl_ddr_sdram_size();
+
+ return 0;
+}
+#else
int fsl_initdram(void)
{
puts("Initializing DDR....using SPD\n");
@@ -123,3 +133,4 @@
#endif
return 0;
}
+#endif /* CONFIG_TFABOOT */
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 1e2ad98..f3018aa 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -88,6 +88,9 @@
#if !defined(CONFIG_SPL_BUILD)
int checkboard(void)
{
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+#endif
char buf[64];
u8 sw;
static const char *const freq[] = {"100", "125", "156.25",
@@ -117,9 +120,14 @@
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+#ifdef CONFIG_TFABOOT
+ if (src == BOOT_SOURCE_SD_MMC)
+ puts("SD card\n");
+#else
#ifdef CONFIG_SD_BOOT
puts("SD card\n");
#endif
+#endif /* CONFIG_TFABOOT */
switch (sw) {
#ifdef CONFIG_TARGET_LS1088AQDS
case 0:
@@ -546,6 +554,10 @@
void fsl_fdt_fixup_flash(void *fdt)
{
int offset;
+#ifdef CONFIG_TFABOOT
+ u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+ u32 val;
+#endif
/*
* IFC-NOR and QSPI are muxed on SoC.
@@ -553,6 +565,37 @@
* disable QSPI node in dts in case QSPI is not enabled.
*/
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+ bool disable_ifc = false;
+
+ switch (src) {
+ case BOOT_SOURCE_IFC_NOR:
+ disable_ifc = false;
+ break;
+ case BOOT_SOURCE_QSPI_NOR:
+ disable_ifc = true;
+ break;
+ default:
+ val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
+ if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
+ disable_ifc = true;
+ break;
+ }
+
+ if (disable_ifc) {
+ offset = fdt_path_offset(fdt, "/soc/ifc/nor");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/ifc/nor");
+ } else {
+ offset = fdt_path_offset(fdt, "/soc/quadspi");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/quadspi");
+ }
+
+#else
#ifdef CONFIG_FSL_QSPI
offset = fdt_path_offset(fdt, "/soc/ifc/nor");
@@ -564,6 +607,7 @@
if (offset < 0)
offset = fdt_path_offset(fdt, "/quadspi");
#endif
+#endif
if (offset < 0)
return;
@@ -613,3 +657,37 @@
}
#endif
#endif /* defined(CONFIG_SPL_BUILD) */
+
+#ifdef CONFIG_TFABOOT
+#ifdef CONFIG_MTD_NOR_FLASH
+int is_flash_available(void)
+{
+ char *env_hwconfig = env_get("hwconfig");
+ enum boot_src src = get_boot_src();
+ int is_nor_flash_available = 1;
+
+ switch (src) {
+ case BOOT_SOURCE_IFC_NOR:
+ is_nor_flash_available = 1;
+ break;
+ case BOOT_SOURCE_QSPI_NOR:
+ is_nor_flash_available = 0;
+ break;
+ /*
+ * In Case of SD boot,if qspi is defined in env_hwconfig
+ * disable nor flash probe.
+ */
+ default:
+ if (hwconfig_f("qspi", env_hwconfig))
+ is_nor_flash_available = 0;
+ break;
+ }
+ return is_nor_flash_available;
+}
+#endif
+
+void *env_sf_get_env_addr(void)
+{
+ return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
+}
+#endif
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..ae177d3
--- /dev/null
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -0,0 +1,64 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_SECURE_BOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
+CONFIG_RSA=y
+CONFIG_SPL_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
new file mode 100644
index 0000000..3328af4
--- /dev/null
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -0,0 +1,61 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_FSL_SPI_ALIGNED_TXFIFO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_BLK=y
+CONFIG_DM_MMC=y
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 743d0cf..95e6786 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -29,16 +29,23 @@
#define LS1088ARDB_PB_BOARD 0x4A
/* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+#else
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
/* Link Definitions */
-
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
+#else
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
#define CONFIG_ENV_ADDR (CONFIG_SYS_FSL_QSPI_BASE + \
CONFIG_ENV_OFFSET)
#endif
+#endif
#define CONFIG_SKIP_LOWLEVEL_INIT
@@ -192,6 +199,7 @@
"mcinitcmd=fsl_mc start mc 0x580a00000" \
" 0x580e00000 \0"
+#ifndef CONFIG_TFABOOT
#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \
"sf read 0x80001000 0xd00000 0x100000;"\
@@ -208,6 +216,7 @@
" cp.b $kernel_start $kernel_load" \
" $kernel_size && bootm $kernel_load"
#endif
+#endif /* CONFIG_TFABOOT */
#endif
/* Monitor Command Prompt */
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 5269bcd..f52ea4d 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -8,6 +8,15 @@
#include "ls1088a_common.h"
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x500000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SECT_SIZE 0x40000
+#else
#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_SECT_SIZE 0x40000
@@ -21,8 +30,10 @@
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x20000
#endif
+#endif /* CONFIG_TFABOOT */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#ifndef CONFIG_SPL_BUILD
#define CONFIG_QIXIS_I2C_ACCESS
#endif
@@ -185,7 +196,8 @@
FTIM2_GPCM_TWP(0x3E))
#define SYS_FPGA_CS_FTIM3 0x0
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
@@ -215,7 +227,6 @@
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
#endif
-
#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
#define I2C_MUX_CH_VOL_MONITOR 0xA
@@ -274,7 +285,8 @@
#ifndef SPL_NO_QSPI
/* QSPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define FSL_QSPI_FLASH_SIZE (1 << 26)
#define FSL_QSPI_FLASH_NUM 2
#endif
@@ -294,6 +306,26 @@
#ifndef SPL_NO_ENV
/* Initial environment variables */
+#ifdef CONFIG_TFABOOT
+#define QSPI_MC_INIT_CMD \
+ "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
+ "sf read 0x80100000 0xE00000 0x100000;" \
+ "env exists secureboot && " \
+ "sf read 0x80700000 0x700000 0x40000 && " \
+ "sf read 0x80740000 0x740000 0x40000 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0"
+#define SD_MC_INIT_CMD \
+ "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "env exists secureboot && " \
+ "mmc read 0x80700000 0x3800 0x10 && " \
+ "mmc read 0x80740000 0x3A00 0x10 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0"
+#else
#if defined(CONFIG_QSPI_BOOT)
#define MC_INIT_CMD \
"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
@@ -317,8 +349,84 @@
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000\0"
#endif
+#endif /* CONFIG_TFABOOT */
#undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_TFABOOT
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "BOARD=ls1088ardb\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x1000000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernelhdr_addr_sd=0x4000\0" \
+ "kernel_start=0x580100000\0" \
+ "kernelheader_start=0x580800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr=0x800000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernel_size_sd=0x14000\0" \
+ "kernelhdr_size_sd=0x10\0" \
+ QSPI_MC_INIT_CMD \
+ "mcmemsize=0x70000000\0" \
+ BOOTENV \
+ "boot_scripts=ls1088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "mmc read 0x80001000 0x6800 0x800;" \
+ "fsl_mc lazyapply dpl 0x80001000;" \
+ "bootm $load_addr#ls1088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size ; env exists secureboot " \
+ "&& sf read $kernelheader_addr_r $kernelheader_addr " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "env exists secureboot && mmc read $kernelheader_addr_r "\
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$BOARD\0"
+#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"BOARD=ls1088ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
@@ -391,8 +499,28 @@
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
+#endif /* CONFIG_TFABOOT */
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND \
+ "sf read 0x80001000 0xd00000 0x100000;" \
+ "env exists mcinitcmd && env exists secureboot " \
+ " && sf read 0x80780000 0x780000 0x100000 " \
+ "&& esbc_validate 0x80780000;env exists mcinitcmd " \
+ "&& fsl_mc lazyapply dpl 0x80001000;" \
+ "run distro_bootcmd;run qspi_bootcmd;" \
+ "env exists secureboot && esbc_halt;"
+#define SD_BOOTCOMMAND \
+ "env exists mcinitcmd && mmcinfo; " \
+ "mmc read 0x80001000 0x6800 0x800; " \
+ "env exists mcinitcmd && env exists secureboot " \
+ " && mmc read 0x80780000 0x3C00 0x10 " \
+ "&& esbc_validate 0x80780000;env exists mcinitcmd " \
+ "&& fsl_mc lazyapply dpl 0x80001000;" \
+ "run distro_bootcmd;run sd_bootcmd;" \
+ "env exists secureboot && esbc_halt;"
+#else
#if defined(CONFIG_QSPI_BOOT)
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
@@ -416,6 +544,7 @@
"run distro_bootcmd;run sd_bootcmd;" \
"env exists secureboot && esbc_halt;"
#endif
+#endif /* CONFIG_TFABOOT */
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET