commit 1441aa6ae8a77ada40407cdfbec783f5559f1646
author Stefano Babic <sbabic@denx.de> Wed Oct 05 03:08:24 2011 +0000
committer Albert ARIBAUD <albert.u.boot@aribaud.net> Tue Mar 27 22:05:29 2012 +0200
tree 512a31f0cc38e4630dd3bcd05a3ef4753a351da1
parent 88b821bbef64f0b69710ff7d857fc490f72a6d3c

Davinci: ea20: use gpio framework to access gpios

Drop direct access to SOC's registers and use
the function of the GPIO driver for da8xx.

[Tom: Remove gpio[68]_base as it's now unused]

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: dzu@denx.de
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>

board/davinci/ea20/ea20.c

diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 9b6c4c0..43632c2 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -35,7 +35,7 @@
 #include <asm/arch/emac_defs.h>
 #include <asm/io.h>
 #include <asm/arch/davinci_misc.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/da8xx-fb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -172,37 +172,24 @@
 
 int board_early_init_f(void)
 {
-	struct davinci_gpio *gpio6_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK67;
-
 	/* PinMux for GPIO */
 	if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0)
 		return 1;
 
 	/* Set the RESETOUTn low */
-	writel((readl(&gpio6_base->set_data) & ~(1 << 15)),
-		&gpio6_base->set_data);
-	writel((readl(&gpio6_base->dir) & ~(1 << 15)), &gpio6_base->dir);
+	gpio_direction_output(111, 0);
 
 	/* Set U0_SW0 low for UART0 as console*/
-	writel((readl(&gpio6_base->set_data) & ~(1 << 10)),
-		&gpio6_base->set_data);
-	writel((readl(&gpio6_base->dir) & ~(1 << 10)), &gpio6_base->dir);
+	gpio_direction_output(106, 0);
 
 	/* Set U0_SW1 low for UART0 as console*/
-	writel((readl(&gpio6_base->set_data) & ~(1 << 12)),
-		&gpio6_base->set_data);
-	writel((readl(&gpio6_base->dir) & ~(1 << 12)), &gpio6_base->dir);
+	gpio_direction_output(108, 0);
 
 	/* Set LCD_B_PWR low to power down LCD Backlight*/
-	writel((readl(&gpio6_base->set_data) & ~(1 << 6)),
-		&gpio6_base->set_data);
-	writel((readl(&gpio6_base->dir) & ~(1 << 6)), &gpio6_base->dir);
+	gpio_direction_output(102, 0);
 
 	/* Set DISP_ON low to disable LCD output*/
-	writel((readl(&gpio6_base->set_data) & ~(1 << 1)),
-		&gpio6_base->set_data);
-	writel((readl(&gpio6_base->dir) & ~(1 << 1)), &gpio6_base->dir);
+	gpio_direction_output(97, 0);
 
 #ifndef CONFIG_USE_IRQ
 	irq_init();
@@ -264,12 +251,10 @@
 	       &davinci_syscfg_regs->mstpri[2]);
 
 	/* Set LCD_B_PWR low to power up LCD Backlight*/
-	writel((readl(&gpio6_base->set_data)  | (1 << 6)),
-		&gpio6_base->set_data);
+	gpio_set_value(102, 1);
 
 	/* Set DISP_ON low to disable LCD output*/
-	writel((readl(&gpio6_base->set_data) | (1 << 1)),
-		&gpio6_base->set_data);
+	gpio_set_value(97, 1);
 
 	return 0;
 }
@@ -291,17 +276,12 @@
 
 int board_late_init(void)
 {
-	struct davinci_gpio *gpio8_base =
-			(struct davinci_gpio *)DAVINCI_GPIO_BANK8;
-
 	/* PinMux for HALTEN */
 	if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0)
 		return 1;
 
 	/* Set HALTEN to high */
-	writel((readl(&gpio8_base->set_data) | (1 << 6)),
-		&gpio8_base->set_data);
-	writel((readl(&gpio8_base->dir) & ~(1 << 6)), &gpio8_base->dir);
+	gpio_direction_output(134, 1);
 
 	setenv("stdout", "serial");
 

include/configs/ea20.h

diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index b4610d9..e059b30 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -48,6 +48,7 @@
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
+#define CONFIG_DA8XX_GPIO
 
 /*
  * Memory Info
@@ -167,6 +168,7 @@
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_GPIO
 
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS