i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5300c27..b3a2405 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -404,6 +404,7 @@
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
+ imx6dl-mamoj.dtb \
imx6q-cm-fx6.dtb \
imx6q-icore.dtb \
imx6q-icore-mipi.dtb \
diff --git a/arch/arm/dts/imx6dl-mamoj-u-boot.dtsi b/arch/arm/dts/imx6dl-mamoj-u-boot.dtsi
new file mode 100644
index 0000000..d4c3c0b
--- /dev/null
+++ b/arch/arm/dts/imx6dl-mamoj-u-boot.dtsi
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+&usdhc3 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx6dl-mamoj.dts b/arch/arm/dts/imx6dl-mamoj.dts
new file mode 100644
index 0000000..068d518
--- /dev/null
+++ b/arch/arm/dts/imx6dl-mamoj.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl.dtsi"
+
+/ {
+ model = "BTicino i.MX6DL Mamoj board";
+ compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0
+ MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0
+ MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0
+ MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0
+ MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index f7157ab..8f469c4 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -220,6 +220,34 @@
config TARGET_MX6QARM2
bool "mx6qarm2"
+config TARGET_MX6DL_MAMOJ
+ bool "Support BTicino Mamoj"
+ select MX6QDL
+ select OF_CONTROL
+ select PINCTRL
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_MMC
+ select DM_THERMAL
+ select SPL
+ select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_LIBFDT if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_GPIO_SUPPORT if SPL
+ select SPL_LIBCOMMON_SUPPORT if SPL
+ select SPL_LIBDISK_SUPPORT if SPL
+ select SPL_LIBGENERIC_SUPPORT if SPL
+ select SPL_MMC_SUPPORT if SPL
+ select SPL_SERIAL_SUPPORT if SPL
+ select SPL_USB_HOST_SUPPORT if SPL
+ select SPL_USB_GADGET_SUPPORT if SPL
+ select SPL_USB_SDP_SUPPORT if SPL
+ select SPL_WATCHDOG_SUPPORT if SPL
+
config TARGET_MX6Q_ENGICAM
bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
@@ -463,6 +491,7 @@
source "board/barco/platinum/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
+source "board/bticino/mamoj/Kconfig"
source "board/ccv/xpress/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"