spl: imx6: Let spl_boot_device return USDHC1 or USDHC2
Currently, when the spl_boot_device checks the boot device, it
will only return MMC1 when it's either sd or eMMC regardless
of whether or not it's MMC1 or MMC2. This is a problem when
booting from MMC2 if MMC isn't being manually configured like in
the DM_SPL case with SPL_OF_CONTROL.
This patch will check the register and return either MMC1 or MMC2.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
index 9f1e0f6..1f230ac 100644
--- a/arch/arm/mach-imx/spl.c
+++ b/arch/arm/mach-imx/spl.c
@@ -24,6 +24,7 @@
{
unsigned int bmode = readl(&src_base->sbmr2);
u32 reg = imx6_src_get_boot_mode();
+ u32 mmc_index = ((reg >> 11) & 0x03);
/*
* Check for BMODE if serial downloader is enabled
@@ -84,11 +85,12 @@
/* SD/eSD: 8.5.3, Table 8-15 */
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
- return BOOT_DEVICE_MMC1;
- /* MMC/eMMC: 8.5.3 */
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
- return BOOT_DEVICE_MMC1;
+ if (mmc_index == 1)
+ return BOOT_DEVICE_MMC2;
+ else
+ return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2, Table 8-10 */
case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:
return BOOT_DEVICE_NAND;