aspeed: Add basic ast2500-specific drivers and configuration
Clock Driver
This driver is ast2500-specific and is not compatible with earlier
versions of this chip. The differences are not that big, but they are
in somewhat random places, so making it compatible with ast2400 is not
worth the effort at the moment.
SDRAM MC driver
The driver is very ast2500-specific and is completely incompatible
with previous versions of the chip.
The memory controller is very poorly documented by Aspeed in the
datasheet, with any mention of the whole range of registers missing. The
initialization procedure has been basically taken from Aspeed SDK, where
it is implemented in assembly. Here it is rewritten in C, with very limited
understanding of what exactly it is doing.
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f55348e..884c21c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -17,3 +17,5 @@
obj-$(CONFIG_CLK_EXYNOS) += exynos/
obj-$(CONFIG_CLK_AT91) += at91/
obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
+
+obj-$(CONFIG_ARCH_ASPEED) += aspeed/
diff --git a/drivers/clk/aspeed/Makefile b/drivers/clk/aspeed/Makefile
new file mode 100644
index 0000000..65d1cd6
--- /dev/null
+++ b/drivers/clk/aspeed/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_ASPEED_AST2500) += clk_ast2500.o
diff --git a/drivers/clk/aspeed/clk_ast2500.c b/drivers/clk/aspeed/clk_ast2500.c
new file mode 100644
index 0000000..af369cc
--- /dev/null
+++ b/drivers/clk/aspeed/clk_ast2500.c
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2500.h>
+#include <dm/lists.h>
+#include <dt-bindings/clock/ast2500-scu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * For H-PLL and M-PLL the formula is
+ * (Output Frequency) = CLKIN * ((M + 1) / (N + 1)) / (P + 1)
+ * M - Numerator
+ * N - Denumerator
+ * P - Post Divider
+ * They have the same layout in their control register.
+ */
+
+/*
+ * Get the rate of the M-PLL clock from input clock frequency and
+ * the value of the M-PLL Parameter Register.
+ */
+static ulong ast2500_get_mpll_rate(ulong clkin, u32 mpll_reg)
+{
+ const ulong num = (mpll_reg >> SCU_MPLL_NUM_SHIFT) & SCU_MPLL_NUM_MASK;
+ const ulong denum = (mpll_reg >> SCU_MPLL_DENUM_SHIFT)
+ & SCU_MPLL_DENUM_MASK;
+ const ulong post_div = (mpll_reg >> SCU_MPLL_POST_SHIFT)
+ & SCU_MPLL_POST_MASK;
+
+ return (clkin * ((num + 1) / (denum + 1))) / post_div;
+}
+
+/*
+ * Get the rate of the H-PLL clock from input clock frequency and
+ * the value of the H-PLL Parameter Register.
+ */
+static ulong ast2500_get_hpll_rate(ulong clkin, u32 hpll_reg)
+{
+ const ulong num = (hpll_reg >> SCU_HPLL_NUM_SHIFT) & SCU_HPLL_NUM_MASK;
+ const ulong denum = (hpll_reg >> SCU_HPLL_DENUM_SHIFT)
+ & SCU_HPLL_DENUM_MASK;
+ const ulong post_div = (hpll_reg >> SCU_HPLL_POST_SHIFT)
+ & SCU_HPLL_POST_MASK;
+
+ return (clkin * ((num + 1) / (denum + 1))) / post_div;
+}
+
+static ulong ast2500_get_clkin(struct ast2500_scu *scu)
+{
+ return readl(&scu->hwstrap) & SCU_HWSTRAP_CLKIN_25MHZ
+ ? 25 * 1000 * 1000 : 24 * 1000 * 1000;
+}
+
+/**
+ * Get current rate or uart clock
+ *
+ * @scu SCU registers
+ * @uart_index UART index, 1-5
+ *
+ * @return current setting for uart clock rate
+ */
+static ulong ast2500_get_uart_clk_rate(struct ast2500_scu *scu, int uart_index)
+{
+ /*
+ * ast2500 datasheet is very confusing when it comes to UART clocks,
+ * especially when CLKIN = 25 MHz. The settings are in
+ * different registers and it is unclear how they interact.
+ *
+ * This has only been tested with default settings and CLKIN = 24 MHz.
+ */
+ ulong uart_clkin;
+
+ if (readl(&scu->misc_ctrl2) &
+ (1 << (uart_index - 1 + SCU_MISC2_UARTCLK_SHIFT)))
+ uart_clkin = 192 * 1000 * 1000;
+ else
+ uart_clkin = 24 * 1000 * 1000;
+
+ if (readl(&scu->misc_ctrl1) & SCU_MISC_UARTCLK_DIV13)
+ uart_clkin /= 13;
+
+ return uart_clkin;
+}
+
+static ulong ast2500_clk_get_rate(struct clk *clk)
+{
+ struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
+ ulong clkin = ast2500_get_clkin(priv->scu);
+ ulong rate;
+
+ switch (clk->id) {
+ case PLL_HPLL:
+ case ARMCLK:
+ /*
+ * This ignores dynamic/static slowdown of ARMCLK and may
+ * be inaccurate.
+ */
+ rate = ast2500_get_hpll_rate(clkin,
+ readl(&priv->scu->h_pll_param));
+ break;
+ case MCLK_DDR:
+ rate = ast2500_get_mpll_rate(clkin,
+ readl(&priv->scu->m_pll_param));
+ break;
+ case PCLK_UART1:
+ rate = ast2500_get_uart_clk_rate(priv->scu, 1);
+ break;
+ case PCLK_UART2:
+ rate = ast2500_get_uart_clk_rate(priv->scu, 2);
+ break;
+ case PCLK_UART3:
+ rate = ast2500_get_uart_clk_rate(priv->scu, 3);
+ break;
+ case PCLK_UART4:
+ rate = ast2500_get_uart_clk_rate(priv->scu, 4);
+ break;
+ case PCLK_UART5:
+ rate = ast2500_get_uart_clk_rate(priv->scu, 5);
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ return rate;
+}
+
+static void ast2500_scu_unlock(struct ast2500_scu *scu)
+{
+ writel(SCU_UNLOCK_VALUE, &scu->protection_key);
+ while (!readl(&scu->protection_key))
+ ;
+}
+
+static void ast2500_scu_lock(struct ast2500_scu *scu)
+{
+ writel(~SCU_UNLOCK_VALUE, &scu->protection_key);
+ while (readl(&scu->protection_key))
+ ;
+}
+
+static ulong ast2500_configure_ddr(struct ast2500_scu *scu, ulong rate)
+{
+ ulong clkin = ast2500_get_clkin(scu);
+ u32 mpll_reg;
+
+ /*
+ * There are not that many combinations of numerator, denumerator
+ * and post divider, so just brute force the best combination.
+ * However, to avoid overflow when multiplying, use kHz.
+ */
+ const ulong clkin_khz = clkin / 1000;
+ const ulong rate_khz = rate / 1000;
+ ulong best_num = 0;
+ ulong best_denum = 0;
+ ulong best_post = 0;
+ ulong delta = rate;
+ ulong num, denum, post;
+
+ for (denum = 0; denum <= SCU_MPLL_DENUM_MASK; ++denum) {
+ for (post = 0; post <= SCU_MPLL_POST_MASK; ++post) {
+ num = (rate_khz * (post + 1) / clkin_khz) * (denum + 1);
+ ulong new_rate_khz = (clkin_khz
+ * ((num + 1) / (denum + 1)))
+ / (post + 1);
+
+ /* Keep the rate below requested one. */
+ if (new_rate_khz > rate_khz)
+ continue;
+
+ if (new_rate_khz - rate_khz < delta) {
+ delta = new_rate_khz - rate_khz;
+
+ best_num = num;
+ best_denum = denum;
+ best_post = post;
+
+ if (delta == 0)
+ goto rate_calc_done;
+ }
+ }
+ }
+
+ rate_calc_done:
+ mpll_reg = readl(&scu->m_pll_param);
+ mpll_reg &= ~((SCU_MPLL_POST_MASK << SCU_MPLL_POST_SHIFT)
+ | (SCU_MPLL_NUM_MASK << SCU_MPLL_NUM_SHIFT)
+ | (SCU_MPLL_DENUM_MASK << SCU_MPLL_DENUM_SHIFT));
+ mpll_reg |= (best_post << SCU_MPLL_POST_SHIFT)
+ | (best_num << SCU_MPLL_NUM_SHIFT)
+ | (best_denum << SCU_MPLL_DENUM_SHIFT);
+
+ ast2500_scu_unlock(scu);
+ writel(mpll_reg, &scu->m_pll_param);
+ ast2500_scu_lock(scu);
+
+ return ast2500_get_mpll_rate(clkin, mpll_reg);
+}
+
+static ulong ast2500_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
+
+ ulong new_rate;
+ switch (clk->id) {
+ case PLL_MPLL:
+ case MCLK_DDR:
+ new_rate = ast2500_configure_ddr(priv->scu, rate);
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ return new_rate;
+}
+
+struct clk_ops ast2500_clk_ops = {
+ .get_rate = ast2500_clk_get_rate,
+ .set_rate = ast2500_clk_set_rate,
+};
+
+static int ast2500_clk_probe(struct udevice *dev)
+{
+ struct ast2500_clk_priv *priv = dev_get_priv(dev);
+
+ priv->scu = dev_get_addr_ptr(dev);
+ if (IS_ERR(priv->scu))
+ return PTR_ERR(priv->scu);
+
+ return 0;
+}
+
+static int ast2500_clk_bind(struct udevice *dev)
+{
+ int ret;
+
+ /* The reset driver does not have a device node, so bind it here */
+ ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
+ if (ret)
+ debug("Warning: No reset driver: ret=%d\n", ret);
+
+ return 0;
+}
+
+static const struct udevice_id ast2500_clk_ids[] = {
+ { .compatible = "aspeed,ast2500-scu" },
+ { }
+};
+
+U_BOOT_DRIVER(aspeed_ast2500_scu) = {
+ .name = "aspeed_ast2500_scu",
+ .id = UCLASS_CLK,
+ .of_match = ast2500_clk_ids,
+ .priv_auto_alloc_size = sizeof(struct ast2500_clk_priv),
+ .ops = &ast2500_clk_ops,
+ .bind = ast2500_clk_bind,
+ .probe = ast2500_clk_probe,
+};