drivers/usb : Define usb control register mask for w1c bits
Define and use CONTROL_REGISTER_W1C_MASK to make sure that
w1c bits of usb control register do not get reset while
writing any other bit
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6cb4d98..45062e6 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -104,15 +104,20 @@
if (!strncmp(phy_type, "utmi", 4)) {
#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
- setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
- setbits_be32(&ehci->control, UTMI_PHY_EN);
+ clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+ PHY_CLK_SEL_UTMI);
+ clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+ UTMI_PHY_EN);
udelay(1000); /* delay required for PHY Clk to appear */
#endif
out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
- setbits_be32(&ehci->control, USB_EN);
+ clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+ USB_EN);
} else {
- setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
- clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN);
+ clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+ PHY_CLK_SEL_ULPI);
+ clrsetbits_be32(&ehci->control, UTMI_PHY_EN |
+ CONTROL_REGISTER_W1C_MASK, USB_EN);
udelay(1000); /* delay required for PHY Clk to appear */
if (!usb_phy_clk_valid(ehci))
return -EINVAL;
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index c9ee1d5..dd77ad6 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -11,6 +11,8 @@
#include <asm/processor.h>
+#define CONTROL_REGISTER_W1C_MASK 0x00020000 /* W1C: PHY_CLK_VALID */
+
/* Global offsets */
#define FSL_SKIP_PCI 0x100