Coding stylke cleanup; rebuild CHANGELOG
diff --git a/include/mpc5xx.h b/include/mpc5xx.h
index e9b08a0..414651f 100644
--- a/include/mpc5xx.h
+++ b/include/mpc5xx.h
@@ -76,10 +76,10 @@
#define SIUMCR_DBPC01 0x00080000 /* - " - */
#define SIUMCR_DBPC10 0x00100000 /* - " - */
#define SIUMCR_DBPC11 0x00180000 /* - " - */
-#define SIUMCR_GPC00 0x00000000 /* General Pins Config */
-#define SIUMCR_GPC01 0x00020000 /* General Pins Config */
-#define SIUMCR_GPC10 0x00040000 /* General Pins Config */
-#define SIUMCR_GPC11 0x00060000 /* General Pins Config */
+#define SIUMCR_GPC00 0x00000000 /* General Pins Config */
+#define SIUMCR_GPC01 0x00020000 /* General Pins Config */
+#define SIUMCR_GPC10 0x00040000 /* General Pins Config */
+#define SIUMCR_GPC11 0x00060000 /* General Pins Config */
#define SIUMCR_DLK 0x00010000 /* Debug Register Lock */
#define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */
#define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */
@@ -90,7 +90,7 @@
#define SIUMCR_MLRC01 0x00000400 /* - " - */
#define SIUMCR_MLRC10 0x00000800 /* - " - */
#define SIUMCR_MLRC11 0x00000c00 /* - " - */
-#define SIUMCR_MTSC 0x00000100 /* Memory transfer */
+#define SIUMCR_MTSC 0x00000100 /* Memory transfer */
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control Register
@@ -123,13 +123,13 @@
* SCCR - System Clock and reset Control Register
*/
#define SCCR_DFNL_MSK 0x00000070 /* DFNL mask */
-#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */
+#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */
#define SCCR_DFNL_SHIFT 0x0000004 /* DFNL shift value */
#define SCCR_RTSEL 0x00100000 /* RTC circuit input source select */
#define SCCR_EBDF00 0x00000000 /* Division factor 1. CLKOUT is GCLK2 */
#define SCCR_EBDF11 0x00060000 /* reserved */
#define SCCR_TBS 0x02000000 /* Time Base Source */
-#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */
+#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */
#define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */
#define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */
#define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */
@@ -138,11 +138,11 @@
/*-----------------------------------------------------------------------
* MC - Memory Controller
*/
-#define BR_V 0x00000001 /* Bank valid */
-#define BR_BI 0x00000002 /* Burst inhibit */
-#define BR_PS_8 0x00000400 /* 8 bit port size */
-#define BR_PS_16 0x00000800 /* 16 bit port size */
-#define BR_PS_32 0x00000000 /* 32 bit port size */
+#define BR_V 0x00000001 /* Bank valid */
+#define BR_BI 0x00000002 /* Burst inhibit */
+#define BR_PS_8 0x00000400 /* 8 bit port size */
+#define BR_PS_16 0x00000800 /* 16 bit port size */
+#define BR_PS_32 0x00000000 /* 32 bit port size */
#define BR_LBDIR 0x00000008 /* Late burst data in progess */
#define BR_SETA 0x00000004 /* External Data Acknowledge */
#define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */
@@ -159,8 +159,8 @@
/*-----------------------------------------------------------------------
* UMCR - UIMB Module Configuration Register
*/
-#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */
-#define UMCR_HSPEED 0x10000000 /* Half speed */
+#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */
+#define UMCR_HSPEED 0x10000000 /* Half speed */
/*-----------------------------------------------------------------------
* ICTRL - I-Bus Support Control Register
@@ -174,16 +174,16 @@
* SCI - Serial communication interface
*/
-#define SCI_TDRE 0x0100 /* Transmit data register empty */
-#define SCI_TE 0x0008 /* Transmitter enabled */
+#define SCI_TDRE 0x0100 /* Transmit data register empty */
+#define SCI_TE 0x0008 /* Transmitter enabled */
#define SCI_RE 0x0004 /* Receiver enabled */
-#define SCI_RDRF 0x0040 /* Receive data register full */
-#define SCI_PE 0x0400 /* Parity enable */
-#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */
-#define SCI_SCXDR_MK 0x00ff /* Data register mask */
+#define SCI_RDRF 0x0040 /* Receive data register full */
+#define SCI_PE 0x0400 /* Parity enable */
+#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */
+#define SCI_SCXDR_MK 0x00ff /* Data register mask */
#define SCI_M_11 0x0200 /* Frame size is 11 bit */
#define SCI_M_10 0x0000 /* Frame size is 10 bit */
-#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */
+#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */
#define SCI_PORT_2 ((int)2)
#endif /* __MPC5XX_H__ */