net: pfe_eth: read PFE ESBC header flash with spi_flash_read API
Read PFE ESBC header flash with spi_flash_read API
- logs as follows,
Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256
KiB, total 64 MiB
"Synchronous Abort" handler, esr 0x96000210
elr: 000000008206db44 lr : 0000000082004ea0 (reloc)
elr: 00000000b7ba6b44 lr : 00000000b7b3dea0
x0 : 00000000b79407e8 x1 : 0000000040640000
x2 : 0000000000000050 x3 : 0000000000000000
x4 : 000000000000000a x5 : 0000000000000050
x6 : 0000000000000366 x7 : 00000000b7942308
x8 : 00000000b76407c0 x9 : 0000000000000008
x10: 0000000000000044 x11: 00000000b7634d1c
x12: 000000000000004f x13: 0000000000000044
x14: 00000000b7634d98 x15: 00000000b76407c0
x16: 0000000000000000 x17: 0000000000000000
x18: 00000000b7636dd8 x19: 0000000000000000
x20: 00000000b79407d0 x21: 00000000b79407e8
x22: 0000000040640000 x23: 00000000b7634e58
x24: 0000000000000000 x25: 0000000003800000
x26: 00000000b7bdd000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000b7634d10
Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826)
Resetting CPU ...
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
index 55b414e..4ac69d7 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -16,6 +16,10 @@
hex "Flash address of PFE firmware"
default 0x40a00000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x40000
+
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40400000
@@ -65,6 +69,10 @@
hex "Flash address of PFE firmware"
default 0x40020000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x40000
+
config SYS_LS_PPA_FW_ADDR
hex "PPA Firmware Addr"
default 0x40060000
@@ -77,6 +85,9 @@
hex "PFE Firmware HDR Addr"
default 0x401f8000
+config SYS_LS_PFE_ESBC_LENGTH
+ hex "length of PFE Firmware HDR"
+ default 0xc00
endif
if TARGET_LS1012AFRDM || TARGET_LS1012AFRWY
diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index 8844557..59b1a87 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -20,6 +20,14 @@
config SYS_LS_PPA_ESBC_ADDR
hex "PPA Firmware HDR Addr"
default 0x40680000
+
+config SYS_LS_PFE_ESBC_ADDR
+ hex "PFE Firmware HDR Addr"
+ default 0x40700000
+
+config SYS_LS_PFE_ESBC_LENGTH
+ hex "length of PFE Firmware HDR"
+ default 0xc00
endif
if FSL_PFE
@@ -39,9 +47,9 @@
hex "Flash address of PFE firmware"
default 0x40a00000
-config SYS_LS_PFE_ESBC_ADDR
- hex "PFE Firmware HDR Addr"
- default 0x40700000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x300000
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 5a2fa91..c4acea3 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -20,6 +20,14 @@
config SYS_LS_PPA_ESBC_ADDR
hex "PPA Firmware HDR Addr"
default 0x40680000
+
+config SYS_LS_PFE_ESBC_ADDR
+ hex "PFE Firmware HDR Addr"
+ default 0x40640000
+
+config SYS_LS_PFE_ESBC_LENGTH
+ hex "length of PFE Firmware HDR"
+ default 0xc00
endif
if FSL_PFE
@@ -33,9 +41,9 @@
hex "Flash address of PFE firmware"
default 0x40a00000
-config SYS_LS_PFE_ESBC_ADDR
- hex "PFE Firmware HDR Addr"
- default 0x40640000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x300000
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
@@ -89,6 +97,10 @@
hex "Flash address of PFE firmware"
default 0x40a00000
+config SYS_LS_PFE_FW_LENGTH
+ hex "length of PFE firmware"
+ default 0x300000
+
config DDR_PFE_PHYS_BASEADDR
hex "PFE DDR physical base address"
default 0x03800000