arm64: dts: rk3399: Sync v5.7-rc1 from Linux
Sync rk3399 dts(i) files from v5.7-rc1 linux-next.
Reason:
To get updated PCIe nodes and properties on respective
dts(i) files.
Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
- rk3399-puma-u-boot.dtsi spiflash label changed to norflash
- move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci into rk3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
index 84433cf..e0d7561 100644
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -52,13 +52,58 @@
pinctrl-names = "default";
pinctrl-0 = <&ir_rx>;
};
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ /*
+ * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+ * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+ */
+ cooling-levels = <0 12 18 255>;
+ #cooling-cells = <2>;
+ fan-supply = <&vcc12v0_sys>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+};
+
+&cpu_thermal {
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map3 {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&pcie0 {
+ num-lanes = <4>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
};
&pinctrl {
ir {
ir_rx: ir-rx {
/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
- rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
};
};
};