arm64: dts: rk3399: Sync v5.7-rc1 from Linux
Sync rk3399 dts(i) files from v5.7-rc1 linux-next.
Reason:
To get updated PCIe nodes and properties on respective
dts(i) files.
Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
- rk3399-puma-u-boot.dtsi spiflash label changed to norflash
- move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci into rk3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
index cf37b96..f9f7246 100644
--- a/arch/arm/dts/rk3399-orangepi.dts
+++ b/arch/arm/dts/rk3399-orangepi.dts
@@ -136,13 +136,13 @@
vin-supply = <&vcc_sys>;
};
- vcc5v0_typec0: vcc5v0-typec0-regulator {
+ vbus_typec: vbus-typec-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec0_en>;
- regulator-name = "vcc5v0_typec0";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vbus_typec";
vin-supply = <&vcc_sys>;
};
@@ -202,14 +202,27 @@
clock_in_out = "input";
phy-supply = <&vcc3v3_s3>;
phy-mode = "rgmii";
+ phy-handle = <&rtl8211e>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
+ pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: phy@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpu {
@@ -419,6 +432,8 @@
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu_b_sleep>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -436,6 +451,8 @@
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpu_sleep>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -472,6 +489,7 @@
compatible = "asahi-kasei,ak09911";
reg = <0x0c>;
vdd-supply = <&vcc3v3_s3>;
+ vid-supply = <&vcc3v3_s3>;
};
mpu6500@68 {
@@ -504,6 +522,16 @@
pinctrl-0 = <&light_int_l>;
vdd-supply = <&vcc3v3_s3>;
};
+
+ fusb302@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&chg_cc_int_l>;
+ vbus-supply = <&vbus_typec>;
+ };
};
&io_domains {
@@ -526,7 +554,25 @@
};
};
+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
+ cpu_b_sleep: cpu-b-sleep {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ gpu_sleep: gpu-sleep {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
pmic_int_l: pmic-int-l {
rockchip,pins =
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -536,7 +582,7 @@
sd {
sdmmc0_pwr_h: sdmmc0-pwr-h {
rockchip,pins =
- <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -546,7 +592,7 @@
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- vcc5v0_typec0_en: vcc5v0-typec0-en {
+ vcc5v0_typec_en: vcc5v0-typec-en {
rockchip,pins =
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -595,6 +641,12 @@
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ fusb302 {
+ chg_cc_int_l: chg-cc-int-l {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&pwm0 {
@@ -631,9 +683,12 @@
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -676,7 +731,7 @@
status = "okay";
u2phy0_otg: otg-port {
- phy-supply = <&vcc5v0_typec0>;
+ phy-supply = <&vbus_typec>;
status = "okay";
};
@@ -707,12 +762,14 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk808 1>;
- clock-names = "ext_clock";
+ clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
};
};