Code cleanup
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 1c4370b..d0a7341 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -149,7 +149,7 @@
/* these memory control registers are set up in the assember part,
* in sc520_asm.S, during 'mem_init'. If we muck with them here,
* after we are running a stack in RAM, we have troubles. Besides,
- * these refresh and delay values are better ? simply specified
+ * these refresh and delay values are better ? simply specified
* outright in the include/configs/{cfg} file since the HW designer
* simply dictates it.
*/
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index e1fa37a..8fc713d 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -462,7 +462,7 @@
#if defined CFG_SDRAM_DRCTMCTL
/* just have your hardware desinger _GIVE_ you what you need here! */
- movl $DRCTMCTL, %edi
+ movl $DRCTMCTL, %edi
movb $CFG_SDRAM_DRCTMCTL,%al
movb (%edi), %al
#else
@@ -477,7 +477,7 @@
#ifdef CFG_SDRAM_CAS_LATENCY_3T
orb $0x10, %al
#endif
- movb %al, (%edi)
+ movb %al, (%edi)
#endif
#endif
movl $DRCCTL, %edi /* DRAM Control register */
@@ -537,7 +537,7 @@
movl %eax, %ebx
-done:
+done:
movl %ebx, %eax
#if CFG_SDRAM_ECC_ENABLE
@@ -547,7 +547,7 @@
movl $0x1, %edi
memtest0:
movb $0xa5, (%edi)
- cmpb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
jne out
shrl $1, %ecx
andl %ecx,%ecx
@@ -571,11 +571,11 @@
/* enable NMI mapping for ECC */
movl $ECCINT, %edi
mov $0x10, %al
- movb %al, (%edi)
+ movb %al, (%edi)
/* Turn on ECC */
movl $ECCCTL, %edi
mov $0x05, %al
- movb %al, (%edi)
+ movb %al, (%edi)
#endif
out:
movl %ebx, %eax
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 2e920aa..b2621c2 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -169,7 +169,7 @@
break;
}
utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
-
+
/*
* Set buffer allocations and then assert VRB and TXE.
*/