Enable XAUI interface for B4860QDS
- Added SERDES2 PRTCLs = 0x98, 0x9E
- Default Phy Addresses for Teranetics PHY on XAUI card
The PHY addresses of Teranetics PHY on XAUI riser card are assigned
based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on
AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1
and slot2
- Configure MDIO for 10Gig Mac
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
index 8cde7af..3b5defe 100644
--- a/drivers/net/fm/b4860.c
+++ b/drivers/net/fm/b4860.c
@@ -55,8 +55,10 @@
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
- if ((port == FM1_10GEC1 || port == FM1_10GEC2)
- && (is_serdes_configured(XAUI_FM1)))
+ /*B4860 has two 10Gig Mac*/
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
+ ((is_serdes_configured(XAUI_FM1_MAC9)) ||
+ (is_serdes_configured(XAUI_FM1_MAC10))))
return PHY_INTERFACE_MODE_XGMII;
/* Fix me need to handle RGMII here first */