Support for XUPV2P board
Reset support
BSP autoconfig support
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 4dc2afc..f4a8a1f 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -31,27 +31,31 @@
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
-#define CONFIG_SERIAL_BASE CONFIG_XILINX_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE CONFIG_XILINX_UARTLITE_0_BAUDRATE
+#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
/* setting reset address */
#define CFG_RESET_ADDRESS TEXT_BASE
+/* ethernet */
+#define CONFIG_EMACLITE 1
+#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+
/* gpio */
#define CFG_GPIO_0 1
-#define CFG_GPIO_0_ADDR CONFIG_XILINX_GPIO_0_BASEADDR
+#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
/* interrupt controller */
#define CFG_INTC_0 1
-#define CFG_INTC_0_ADDR CONFIG_XILINX_INTC_0_BASEADDR
-#define CFG_INTC_0_NUM CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS
+#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR
+#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
/* timer */
#define CFG_TIMER_0 1
-#define CFG_TIMER_0_ADDR CONFIG_XILINX_TIMER_0_BASEADDR
-#define CFG_TIMER_0_IRQ CONFIG_XILINX_TIMER_0_IRQ
-#define FREQUENCE 66666666
+#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
+#define FREQUENCE XILINX_CLOCK_FREQ
#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
/*
@@ -62,6 +66,7 @@
*
* CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
* CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
+ * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
*
* 0x1000_0000 CFG_SDRAM_BASE
* FREE
@@ -71,16 +76,18 @@
* FREE
*
* STACK
+ * 0x13F7_F000 CFG_MALLOC_BASE
+ * MALLOC_AREA 256kB Alloc
* 0x11FB_F000 CFG_MONITOR_BASE
- * MONITOR_CODE
+ * MONITOR_CODE 256kB Env
* 0x13FF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA
+ * GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
/* ddr sdram - main memory */
-#define CFG_SDRAM_BASE CONFIG_XILINX_ERAM_START
-#define CFG_SDRAM_SIZE CONFIG_XILINX_ERAM_SIZE
+#define CFG_SDRAM_BASE XILINX_RAM_START
+#define CFG_SDRAM_SIZE XILINX_RAM_SIZE
#define CFG_MEMTEST_START CFG_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000)
@@ -92,7 +99,9 @@
#define SIZE 0x40000
#define CFG_MONITOR_LEN SIZE
#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
+#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_MALLOC_LEN SIZE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
/* stack */
#define CFG_INIT_SP_OFFSET CFG_MONITOR_BASE
@@ -101,8 +110,8 @@
#define FLASH
#ifdef FLASH
- #define CFG_FLASH_BASE CONFIG_XILINX_FLASH_START
- #define CFG_FLASH_SIZE CONFIG_XILINX_FLASH_SIZE
+ #define CFG_FLASH_BASE XILINX_FLASH_START
+ #define CFG_FLASH_SIZE XILINX_FLASH_SIZE
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */
@@ -214,8 +223,8 @@
/* system ace */
/*#define CONFIG_SYSTEMACE
#define DEBUG_SYSTEMACE
-#define CFG_SYSTEMACE_BASE 0xCF000000
-#define CFG_SYSTEMACE_WIDTH 8
+#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
#define CONFIG_DOS_PARTITION
*/
#endif /* __CONFIG_H */
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 1ee6be1..be19269 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -44,8 +44,9 @@
#define CFG_FLASH_SIZE 0x00400000
#define CFG_RESET_ADDRESS 0xfff00100
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
+#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024))
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 115200 }
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
new file mode 100644
index 0000000..224db5c
--- /dev/null
+++ b/include/configs/xupv2p.h
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2007 Czech Technical University.
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "../board/xilinx/xupv2p/xparameters.h"
+
+#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+#define CONFIG_XUPV2P 1
+
+/* uart */
+#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
+#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+
+/* ethernet */
+#define CONFIG_EMAC 1
+#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+
+/*
+ * setting reset address
+ *
+ * TEXT_BASE is set to place, where the U-BOOT run in RAM, but
+ * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS
+ * to FLASH memory and after loading bitstream jump to FLASH.
+ * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
+ * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
+ */
+#define CFG_RESET_ADDRESS 0x36000000
+
+/* gpio */
+#define CFG_GPIO_0 1
+#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+
+/* interrupt controller */
+#define CFG_INTC_0 1
+#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR
+#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+
+/* timer */
+#define CFG_TIMER_0 1
+#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
+#define FREQUENCE XILINX_CLOCK_FREQ
+#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+
+/*
+ * memory layout - Example
+ * TEXT_BASE = 0x3600_0000;
+ * CFG_SRAM_BASE = 0x3000_0000;
+ * CFG_SRAM_SIZE = 0x1000_0000;
+ *
+ * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000
+ * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000
+ * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000
+ *
+ * 0x3000_0000 CFG_SDRAM_BASE
+ * FREE
+ * 0x3600_0000 TEXT_BASE
+ * U-BOOT code
+ * 0x3602_0000
+ * FREE
+ *
+ * STACK
+ * 0x3FF7_F000 CFG_MALLOC_BASE
+ * MALLOC_AREA 256kB Alloc
+ * 0x3FFB_F000 CFG_MONITOR_BASE
+ * MONITOR_CODE 256kB Env
+ * 0x3FFF_F000 CFG_GBL_DATA_OFFSET
+ * GLOBAL_DATA 4kB bd, gd
+ * 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
+ */
+
+/* ddr sdram - main memory */
+#define CFG_SDRAM_BASE XILINX_RAM_START
+#define CFG_SDRAM_SIZE XILINX_RAM_SIZE
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000)
+
+/* global pointer */
+#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */
+
+/* monitor code */
+#define SIZE 0x40000
+#define CFG_MONITOR_LEN SIZE
+#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
+#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_MALLOC_LEN SIZE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+
+/* stack */
+#define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE
+
+#define CFG_NO_FLASH 1
+#define CFG_ENV_IS_NOWHERE 1
+#define CFG_ENV_SIZE 0x1000
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
+ CFG_CMD_MEMORY |\
+ CFG_CMD_IRQ |\
+ CFG_CMD_BDI |\
+ CFG_CMD_NET |\
+ CFG_CMD_IMI |\
+ CFG_CMD_ECHO |\
+ CFG_CMD_CACHE |\
+ CFG_CMD_RUN |\
+ CFG_CMD_AUTOSCRIPT |\
+ CFG_CMD_ASKENV |\
+ CFG_CMD_LOADS |\
+ CFG_CMD_LOADB |\
+ CFG_CMD_MISC |\
+ CFG_CMD_PING \
+ )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/* Miscellaneous configurable options */
+#define CFG_PROMPT "U-Boot-mONStR> "
+#define CFG_CBSIZE 512 /* size of console buffer */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
+#define CFG_MAXARGS 15 /* max number of command args */
+#define CFG_LONGHELP
+#define CFG_LOAD_ADDR 0x12000000 /* default load address */
+
+#define CONFIG_BOOTDELAY 30
+#define CONFIG_BOOTARGS "root=romfs"
+#define CONFIG_HOSTNAME "ml401"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_IPADDR 192.168.0.3
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+
+/* architecture dependent code */
+#define CFG_USR_EXCEP /* user exception */
+#define CFG_HZ 1000
+
+#define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \
+ "base 0;" \
+ "echo"
+
+
+/* system ace */
+/*#define CONFIG_SYSTEMACE
+#define DEBUG_SYSTEMACE
+#define CFG_SYSTEMACE_BASE 0xCF000000
+#define CFG_SYSTEMACE_WIDTH 16
+#define CONFIG_DOS_PARTITION*/
+
+#endif /* __CONFIG_H */