| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Clock drivers for Qualcomm IPQ40xx |
| * |
| * Copyright (c) 2020 Sartura Ltd. |
| * |
| * Author: Robert Marko <robert.marko@sartura.hr> |
| * |
| */ |
| |
| #include <clk-uclass.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <dt-bindings/clock/qcom,gcc-ipq4019.h> |
| |
| #include "clock-qcom.h" |
| |
| static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| switch (clk->id) { |
| case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/ |
| /* This clock is already initialized by SBL1 */ |
| return 1843200; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ipq4019_clk_enable(struct clk *clk) |
| { |
| switch (clk->id) { |
| case GCC_BLSP1_QUP1_SPI_APPS_CLK: /*SPI1*/ |
| /* This clock is already initialized by SBL1 */ |
| return 0; |
| case GCC_PRNG_AHB_CLK: /*PRNG*/ |
| /* This clock is already initialized by SBL1 */ |
| return 0; |
| case GCC_USB3_MASTER_CLK: |
| case GCC_USB3_SLEEP_CLK: |
| case GCC_USB3_MOCK_UTMI_CLK: |
| case GCC_USB2_MASTER_CLK: |
| case GCC_USB2_SLEEP_CLK: |
| case GCC_USB2_MOCK_UTMI_CLK: |
| /* These clocks is already initialized by SBL1 */ |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct qcom_reset_map gcc_ipq4019_resets[] = { |
| [WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 }, |
| [WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 }, |
| [WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 }, |
| [WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 }, |
| [WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 }, |
| [WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 }, |
| [WIFI1_CPU_INIT_RESET] = { 0x20008, 5 }, |
| [WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 }, |
| [WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 }, |
| [WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 }, |
| [WIFI1_CORE_WARM_RESET] = { 0x20008, 1 }, |
| [WIFI1_CORE_COLD_RESET] = { 0x20008, 0 }, |
| [USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 }, |
| [USB3_HSPHY_POR_ARES] = { 0x1e038, 4 }, |
| [USB3_HSPHY_S_ARES] = { 0x1e038, 2 }, |
| [USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 }, |
| [USB2_HSPHY_S_ARES] = { 0x1e01c, 2 }, |
| [PCIE_PHY_AHB_ARES] = { 0x1d010, 11 }, |
| [PCIE_AHB_ARES] = { 0x1d010, 10 }, |
| [PCIE_PWR_ARES] = { 0x1d010, 9 }, |
| [PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 }, |
| [PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 }, |
| [PCIE_PHY_ARES] = { 0x1d010, 6 }, |
| [PCIE_PARF_XPU_ARES] = { 0x1d010, 5 }, |
| [PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 }, |
| [PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 }, |
| [PCIE_PIPE_ARES] = { 0x1d010, 2 }, |
| [PCIE_AXI_S_ARES] = { 0x1d010, 1 }, |
| [PCIE_AXI_M_ARES] = { 0x1d010, 0 }, |
| [ESS_RESET] = { 0x12008, 0}, |
| [GCC_BLSP1_BCR] = {0x01000, 0}, |
| [GCC_BLSP1_QUP1_BCR] = {0x02000, 0}, |
| [GCC_BLSP1_UART1_BCR] = {0x02038, 0}, |
| [GCC_BLSP1_QUP2_BCR] = {0x03008, 0}, |
| [GCC_BLSP1_UART2_BCR] = {0x03028, 0}, |
| [GCC_BIMC_BCR] = {0x04000, 0}, |
| [GCC_TLMM_BCR] = {0x05000, 0}, |
| [GCC_IMEM_BCR] = {0x0E000, 0}, |
| [GCC_ESS_BCR] = {0x12008, 0}, |
| [GCC_PRNG_BCR] = {0x13000, 0}, |
| [GCC_BOOT_ROM_BCR] = {0x13008, 0}, |
| [GCC_CRYPTO_BCR] = {0x16000, 0}, |
| [GCC_SDCC1_BCR] = {0x18000, 0}, |
| [GCC_SEC_CTRL_BCR] = {0x1A000, 0}, |
| [GCC_AUDIO_BCR] = {0x1B008, 0}, |
| [GCC_QPIC_BCR] = {0x1C000, 0}, |
| [GCC_PCIE_BCR] = {0x1D000, 0}, |
| [GCC_USB2_BCR] = {0x1E008, 0}, |
| [GCC_USB2_PHY_BCR] = {0x1E018, 0}, |
| [GCC_USB3_BCR] = {0x1E024, 0}, |
| [GCC_USB3_PHY_BCR] = {0x1E034, 0}, |
| [GCC_SYSTEM_NOC_BCR] = {0x21000, 0}, |
| [GCC_PCNOC_BCR] = {0x2102C, 0}, |
| [GCC_DCD_BCR] = {0x21038, 0}, |
| [GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0}, |
| [GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0}, |
| [GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0}, |
| [GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0}, |
| [GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0}, |
| [GCC_TCSR_BCR] = {0x22000, 0}, |
| [GCC_MPM_BCR] = {0x24000, 0}, |
| [GCC_SPDM_BCR] = {0x25000, 0}, |
| }; |
| |
| static struct msm_clk_data ipq4019_clk_data = { |
| .enable = ipq4019_clk_enable, |
| .set_rate = ipq4019_clk_set_rate, |
| .resets = gcc_ipq4019_resets, |
| .num_resets = ARRAY_SIZE(gcc_ipq4019_resets), |
| }; |
| |
| static const struct udevice_id gcc_ipq4019_of_match[] = { |
| { |
| .compatible = "qcom,gcc-ipq4019", |
| .data = (ulong)&ipq4019_clk_data, |
| }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(gcc_ipq4019) = { |
| .name = "gcc_ipq4019", |
| .id = UCLASS_NOP, |
| .of_match = gcc_ipq4019_of_match, |
| .bind = qcom_cc_bind, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |