i2c: lpc32xx: add support for OTG I2C
Updated the LPC32xx I2C driver to support
the OTG I2C that is part of the USB module.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/i2c/lpc32xx_i2c.c b/drivers/i2c/lpc32xx_i2c.c
index 7f4eccd..e63260c 100644
--- a/drivers/i2c/lpc32xx_i2c.c
+++ b/drivers/i2c/lpc32xx_i2c.c
@@ -1,7 +1,7 @@
/*
* LPC32xx I2C interface driver
*
- * (C) Copyright 2014 DENX Software Engineering GmbH
+ * (C) Copyright 2014-2015 DENX Software Engineering GmbH
* Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud@3adev.fr>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -60,7 +60,8 @@
static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = {
(struct lpc32xx_i2c_registers *)I2C1_BASE,
- (struct lpc32xx_i2c_registers *)I2C2_BASE
+ (struct lpc32xx_i2c_registers *)I2C2_BASE,
+ (struct lpc32xx_i2c_registers *)(USB_BASE + 0x300)
};
/* Set I2C bus speed */
@@ -68,11 +69,17 @@
unsigned int speed)
{
int half_period;
+ int clk_rate;
if (speed == 0)
return -EINVAL;
- half_period = (get_hclk_clk_rate() / speed) / 2;
+ if (adap->hwadapnr == 2)
+ /* OTG I2C clock source is different. */
+ clk_rate = get_periph_clk_rate();
+ else
+ clk_rate = get_hclk_clk_rate();
+ half_period = (clk_rate / speed) / 2;
if ((half_period > 255) || (half_period < 0))
return -EINVAL;
@@ -249,3 +256,10 @@
CONFIG_SYS_I2C_LPC32XX_SPEED,
CONFIG_SYS_I2C_LPC32XX_SLAVE,
1)
+
+U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_2, _i2c_init, NULL,
+ lpc32xx_i2c_read, lpc32xx_i2c_write,
+ lpc32xx_i2c_set_bus_speed,
+ 100000,
+ 0,
+ 2)