igep00x0: merge igep0020 and igep0030 defconfigs to igep00x0_defconfig
Update igep00x0 code with the following features:
- Add board and revision detection for the boards:
- IGEP0020-RF
- IGEP0020-RC
- IGEP0030-RG
- IGEP0030-RE
- Merge IGEP0020 and IGEP0030 mux tables
- Add suport to use GPIO_126, GPIO_127 and GPIO_129
- board_name and board_rev environment variables display board and
revision informations
- Move dtb name selection from code to boot script
Signed-off-by: Pau Pajuelo <ppajuel@gmail.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Pau Pajuelo <ppajuel@gmail.com>
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 74f9bab..5c7f256 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -17,7 +17,6 @@
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/onenand.h>
@@ -38,6 +37,43 @@
&igep_serial
};
+/*
+ * Routine: get_board_revision
+ * Description: GPIO_28 and GPIO_129 are used to read board and revision from
+ * IGEP00x0 boards. First of all, it is necessary to reset USB transceiver from
+ * IGEP0030 in order to read GPIO_IGEP00X0_BOARD_DETECTION correctly, because
+ * this functionality is shared by USB HOST.
+ * Once USB reset is applied, U-boot configures these pins as input pullup to
+ * detect board and revision:
+ * IGEP0020-RF = 0b00
+ * IGEP0020-RC = 0b01
+ * IGEP0030-RG = 0b10
+ * IGEP0030-RE = 0b11
+ */
+static int get_board_revision(void)
+{
+ int revision;
+
+ gpio_request(IGEP0030_USB_TRANSCEIVER_RESET,
+ "igep0030_usb_transceiver_reset");
+ gpio_direction_output(IGEP0030_USB_TRANSCEIVER_RESET, 0);
+
+ gpio_request(GPIO_IGEP00X0_BOARD_DETECTION, "igep00x0_board_detection");
+ gpio_direction_input(GPIO_IGEP00X0_BOARD_DETECTION);
+ revision = 2 * gpio_get_value(GPIO_IGEP00X0_BOARD_DETECTION);
+ gpio_free(GPIO_IGEP00X0_BOARD_DETECTION);
+
+ gpio_request(GPIO_IGEP00X0_REVISION_DETECTION,
+ "igep00x0_revision_detection");
+ gpio_direction_input(GPIO_IGEP00X0_REVISION_DETECTION);
+ revision = revision + gpio_get_value(GPIO_IGEP00X0_REVISION_DETECTION);
+ gpio_free(GPIO_IGEP00X0_REVISION_DETECTION);
+
+ gpio_free(IGEP0030_USB_TRANSCEIVER_RESET);
+
+ return revision;
+}
+
int onenand_board_init(struct mtd_info *mtd)
{
if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) {
@@ -138,31 +174,69 @@
}
#endif
-void set_fdt(void)
+void set_led(void)
{
- switch (gd->bd->bi_arch_number) {
- case MACH_TYPE_IGEP0020:
- env_set("fdtfile", "omap3-igep0020.dtb");
+ switch (get_board_revision()) {
+ case 0:
+ case 1:
+ gpio_request(IGEP0020_GPIO_LED, "igep0020_gpio_led");
+ gpio_direction_output(IGEP0020_GPIO_LED, 1);
break;
- case MACH_TYPE_IGEP0030:
- env_set("fdtfile", "omap3-igep0030.dtb");
+ case 2:
+ case 3:
+ gpio_request(IGEP0030_GPIO_LED, "igep0030_gpio_led");
+ gpio_direction_output(IGEP0030_GPIO_LED, 0);
+ break;
+ default:
+ /* Should not happen... */
break;
}
}
+void set_boardname(void)
+{
+ char rev[5] = { 'F','C','G','E', };
+ int i = get_board_revision();
+
+ rev[i+1] = 0;
+ env_set("board_rev", rev + i);
+ env_set("board_name", i < 2 ? "igep0020" : "igep0030");
+}
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
int misc_init_r(void)
{
+ t2_t *t2_base = (t2_t *)T2_BASE;
+ u32 pbias_lite;
+
twl4030_power_init();
+ /* set VSIM to 1.8V */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
+ TWL4030_PM_RECEIVER_VSIM_VSEL_18,
+ TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ /* set up dual-voltage GPIOs to 1.8V */
+ pbias_lite = readl(&t2_base->pbias_lite);
+ pbias_lite &= ~PBIASLITEVMODE1;
+ pbias_lite |= PBIASLITEPWRDNZ1;
+ writel(pbias_lite, &t2_base->pbias_lite);
+ if (get_cpu_family() == CPU_OMAP36XX)
+ writel(readl(OMAP34XX_CTRL_WKUP_CTRL) |
+ OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
+ OMAP34XX_CTRL_WKUP_CTRL);
+
setup_net_chip();
omap_die_id_display();
- set_fdt();
+ set_led();
+
+ set_boardname();
return 0;
}