arm64: dts: rockchip: Sync px30 from linux-next
Sync the px30 devicetree files from linux-next tree.
commit <14ce8069f48b> ("lib/stackdepot: allow optional init and
stack_table allocation by kvmalloc() - fixup3")
Note, this path even sync rk3326 files as it depends on px30.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts
index 4134e2e..848bc39 100644
--- a/arch/arm/dts/px30-evb.dts
+++ b/arch/arm/dts/px30-evb.dts
@@ -13,8 +13,14 @@
model = "Rockchip PX30 EVB";
compatible = "rockchip,px30-evb", "rockchip,px30";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
+ };
+
chosen {
- stdout-path = "serial2:115200n8";
+ stdout-path = "serial5:115200n8";
};
adc-keys {
@@ -108,6 +114,10 @@
cpu-supply = <&vdd_arm>;
};
+&csi_dphy {
+ status = "okay";
+};
+
&display_subsystem {
status = "okay";
};
@@ -126,22 +136,15 @@
};
panel@0 {
- compatible = "sitronix,st7703";
+ compatible = "xinpeng,xpp055c272";
reg = <0>;
backlight = <&backlight>;
iovcc-supply = <&vcc_1v8>;
vci-supply = <&vcc3v3_lcd>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
};
};
};
@@ -152,7 +155,6 @@
};
&emmc {
- bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
@@ -171,6 +173,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_log>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -388,6 +395,73 @@
};
};
+&i2c1 {
+ status = "okay";
+
+ sensor@d {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0d>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&vcc3v0_pmu>;
+ mount-matrix = "1", /* x0 */
+ "0", /* y0 */
+ "0", /* z0 */
+ "0", /* x1 */
+ "1", /* y1 */
+ "0", /* z1 */
+ "0", /* x2 */
+ "0", /* y2 */
+ "1"; /* z2 */
+ };
+
+ touchscreen@14 {
+ compatible = "goodix,gt1151";
+ reg = <0x14>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ VDDIO-supply = <&vcc3v3_lcd>;
+ };
+
+ sensor@4c {
+ compatible = "fsl,mma7660";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ /* These are relatively safe rise/fall times; TODO: measure */
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+
+ ov5695: ov5695@36 {
+ compatible = "ovti,ov5695";
+ reg = <0x36>;
+ avdd-supply = <&vcc2v8_dvp>;
+ clocks = <&cru SCLK_CIF_OUT>;
+ clock-names = "xvclk";
+ dvdd-supply = <&vcc1v5_dvp>;
+ dovdd-supply = <&vcc1v8_dvp>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+ reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
&i2s1_2ch {
status = "okay";
};
@@ -403,6 +477,24 @@
vccio6-supply = <&vccio_flash>;
};
+&isp {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_in_ucam: endpoint@0 {
+ reg = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&ucam_out>;
+ };
+ };
+ };
+};
+
+&isp_mmu {
+ status = "okay";
+};
+
&pinctrl {
headphone {
hp_det: hp-det {
@@ -464,7 +556,6 @@
};
&sdmmc {
- bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <800>;
@@ -474,10 +565,10 @@
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
+ status = "okay";
};
&sdio {
- bus-width = <4>;
cap-sd-highspeed;
keep-power-in-suspend;
non-removable;
@@ -486,13 +577,27 @@
status = "okay";
};
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer &uart1_cts>;
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
status = "okay";
};
-&uart2 {
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
status = "okay";
};