ahci: Make the AHCI code find the capacity of disks > 128 GB properly
In the structure returned by the ATA identify device command, there are two
fields which describe the device capacity. One is a 32 bit data type which
reports the number of sectors as a 28 bit LBA, and the other is a 64 bit data
type which is for a 48 bit LBA. If the device doesn't support 48 bit LBAs,
the small value is the only value with the correct size. If it supports more,
if the number of sectors is small enough to fit into 28 bits, both fields
reflect the correct value. If it's too large, the smaller field has 28 bits of
1s, 0xfffffff, and the other field has the correct value.
The AHCI driver is implemented by attaching to the generic SCSI code and
translating on the fly between SCSI binary data structures and AHCI data
structures. It responds to requests to execute specific SCSI commands by
executing the equivalent AHCI commands and then crafting a response which
matches what a SCSI disk would send.
The AHCI driver now considers both fields and chooses the correct one when
implementing both the SCSI READ CAPACITY (10) and READ CAPACITY (16) commands.
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/include/scsi.h b/include/scsi.h
index 9681d19..9da764b 100644
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -150,6 +150,8 @@
#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
+#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
+#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */
#define SCSI_READ_LONG 0x3E /* Read Long (O) */
#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */