Merge git://git.denx.de/u-boot-socfpga
diff --git a/Documentation/devicetree/bindings/phy/no-op.txt b/Documentation/devicetree/bindings/phy/no-op.txt
new file mode 100644
index 0000000..a338112
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/no-op.txt
@@ -0,0 +1,16 @@
+NOP PHY driver
+
+This driver is used to stub PHY operations in a driver (USB, SATA).
+This is useful when the 'client' driver (USB, SATA, ...) uses the PHY framework
+and there is no actual PHY harwdare to drive.
+
+Required properties:
+- compatible : must contain "nop-phy"
+- #phy-cells : must contain <0>
+
+Example:
+
+nop_phy {
+ compatible = "nop-phy";
+ #phy-cells = <0>;
+};
diff --git a/Kconfig b/Kconfig
index bb80ada..c1451bc 100644
--- a/Kconfig
+++ b/Kconfig
@@ -95,6 +95,16 @@
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
+config SPL_SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool in spl before relocation"
+ depends on SYS_MALLOC_F
+ default SYS_MALLOC_F_LEN
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
diff --git a/MAINTAINERS b/MAINTAINERS
index 9fd9116..f7e6abd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -452,6 +452,7 @@
X86
M: Simon Glass <sjg@chromium.org>
+M: Bin Meng <bmeng.cn@gmail.com>
S: Maintained
T: git git://git.denx.de/u-boot-x86.git
F: arch/x86/
diff --git a/Makefile b/Makefile
index a1a3aea..3d2b66a 100644
--- a/Makefile
+++ b/Makefile
@@ -1232,13 +1232,16 @@
$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
$(call if_changed,u-boot-elf)
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
+
# Rule to link u-boot
# May be overridden by arch/$(ARCH)/config.mk
quiet_cmd_u-boot__ ?= LD $@
cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
-T u-boot.lds $(u-boot-init) \
--start-group $(u-boot-main) --end-group \
- $(PLATFORM_LIBS) -Map u-boot.map
+ $(PLATFORM_LIBS) -Map u-boot.map; \
+ $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
quiet_cmd_smap = GEN common/system_map.o
cmd_smap = \
@@ -1248,7 +1251,7 @@
-c $(srctree)/common/system_map.c -o common/system_map.o
u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
- $(call if_changed,u-boot__)
+ +$(call if_changed,u-boot__)
ifeq ($(CONFIG_KALLSYMS),y)
$(call cmd,smap)
$(call cmd,u-boot__) common/system_map.o
diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index c129100..436b875 100644
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -71,6 +71,14 @@
reg = <0x0 0x10000000 0x0 0x200000>;
no-map;
};
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0xbc00000>;
+ alignment = <0x0 0x400000>;
+ linux,cma-default;
+ };
};
cpus {
@@ -233,7 +241,7 @@
};
i2c_A: i2c@8500 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@@ -255,6 +263,14 @@
status = "disabled";
};
+ saradc: adc@8680 {
+ compatible = "amlogic,meson-saradc";
+ reg = <0x0 0x8680 0x0 0x34>;
+ #io-channel-cells = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
@@ -271,7 +287,7 @@
};
i2c_B: i2c@87c0 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@@ -280,7 +296,7 @@
};
i2c_C: i2c@87e0 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@@ -288,6 +304,14 @@
status = "disabled";
};
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
@@ -309,7 +333,7 @@
};
sram: sram@c8000000 {
- compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+ compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
@@ -317,12 +341,12 @@
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
+ compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
+ compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
@@ -334,6 +358,13 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+ clkc_AO: clock-controller@040 {
+ compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
+ reg = <0x0 0x00040 0x0 0x4>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
@@ -350,8 +381,24 @@
status = "disabled";
};
+ i2c_AO: i2c@500 {
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x500 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_AO_ab: pwm@550 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x00550 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
ir: ir@580 {
- compatible = "amlogic,meson-gxbb-ir";
+ compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
@@ -365,13 +412,12 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
- rng {
+ hwrng: rng {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
};
-
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
@@ -395,7 +441,6 @@
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
status = "disabled";
};
@@ -442,6 +487,38 @@
cvbs_vdac_port: port@0 {
reg = <0>;
};
+
+ /* HDMI-TX output port */
+ hdmi_tx_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi-tx@c883a000 {
+ compatible = "amlogic,meson-gx-dw-hdmi";
+ reg = <0x0 0xc883a000 0x0 0x1c>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+ };
};
};
};
diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts
index c737183..54a9c6a 100644
--- a/arch/arm/dts/meson-gxbb-odroidc2.dts
+++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
@@ -50,7 +50,7 @@
/ {
compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
model = "Hardkernel ODROID-C2";
-
+
aliases {
serial0 = &uart_AO;
};
@@ -96,7 +96,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -152,6 +152,13 @@
pinctrl-0 = <ð_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ amlogic,tx-delay-ns = <2>;
mdio {
compatible = "snps,dwmac-mdio";
@@ -165,6 +172,57 @@
};
};
+&pinctrl_aobus {
+ gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
+ "USB HUB nRESET", "USB OTG Power En",
+ "J7 Header Pin2", "IR In", "J7 Header Pin4",
+ "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
+ "HDMI CEC", "SYS LED";
+};
+
+&pinctrl_periphs {
+ gpio-line-names = /* Bank GPIOZ */
+ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+ "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+ "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+ "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+ "Eth PHY nRESET", "Eth PHY Intc",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+ "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+ "eMMC Reset", "eMMC CMD",
+ "", "", "", "", "", "", "",
+ /* Bank CARD */
+ "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+ "SDCard D3", "SDCard D2", "SDCard Det",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "",
+ "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+ "PWM D", "PWM B",
+ /* Bank GPIOY */
+ "Revision Bit0", "Revision Bit1", "",
+ "J2 Header Pin35", "", "", "", "J2 Header Pin36",
+ "J2 Header Pin31", "", "", "", "TF VDD En",
+ "J2 Header Pin32", "J2 Header Pin26", "", "",
+ /* Bank GPIOX */
+ "J2 Header Pin29", "J2 Header Pin24",
+ "J2 Header Pin23", "J2 Header Pin22",
+ "J2 Header Pin21", "J2 Header Pin18",
+ "J2 Header Pin33", "J2 Header Pin19",
+ "J2 Header Pin16", "J2 Header Pin15",
+ "J2 Header Pin12", "J2 Header Pin13",
+ "J2 Header Pin8", "J2 Header Pin10",
+ "", "", "", "", "",
+ "J2 Header Pin11", "", "J2 Header Pin7",
+ /* Bank GPIOCLK */
+ "", "", "", "",
+ /* GPIO_TEST_N */
+ "";
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
@@ -177,6 +235,21 @@
pinctrl-names = "default";
};
+&gpio_ao {
+ /*
+ * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
&usb0_phy {
status = "okay";
phy-supply = <&usb_otg_pwr>;
@@ -194,6 +267,11 @@
status = "okay";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc1v8>;
+};
+
/* SD */
&sd_emmc_b {
status = "okay";
diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi
index 39a774a..86105a6 100644
--- a/arch/arm/dts/meson-gxbb.dtsi
+++ b/arch/arm/dts/meson-gxbb.dtsi
@@ -97,17 +97,6 @@
};
};
-&cbus {
- spifc: spi@8c80 {
- compatible = "amlogic,meson-gxbb-spifc";
- reg = <0x0 0x08c80 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_SPI>;
- status = "disabled";
- };
-};
-
ðmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
@@ -129,6 +118,7 @@
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
@@ -203,30 +193,62 @@
function = "pwm_ao_b";
};
};
- };
- clkc_AO: clock-controller@040 {
- compatible = "amlogic,gxbb-aoclkc";
- reg = <0x0 0x00040 0x0 0x4>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out_ao";
+ };
+ };
- pwm_ab_AO: pwm@550 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x0550 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out_ao";
+ };
+ };
- i2c_AO: i2c@500 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x500 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+ mux {
+ groups = "i2s_out_ch01_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ spdif_out_ao_6_pins: spdif_out_ao_6 {
+ mux {
+ groups = "spdif_out_ao_6";
+ function = "spdif_out_ao";
+ };
+ };
+
+ spdif_out_ao_13_pins: spdif_out_ao_13 {
+ mux {
+ groups = "spdif_out_ao_13";
+ function = "spdif_out_ao";
+ };
+ };
};
};
@@ -245,6 +267,7 @@
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 14 120>;
};
emmc_pins: emmc {
@@ -467,6 +490,34 @@
function = "hdmi_i2c";
};
};
+
+ i2sout_ch23_y_pins: i2sout_ch23_y {
+ mux {
+ groups = "i2sout_ch23_y";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_y_pins: i2sout_ch45_y {
+ mux {
+ groups = "i2sout_ch45_y";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_y_pins: i2sout_ch67_y {
+ mux {
+ groups = "i2sout_ch67_y";
+ function = "i2s_out";
+ };
+ };
+
+ spdif_out_y_pins: spdif_out_y {
+ mux {
+ groups = "spdif_out_y";
+ function = "spdif_out";
+ };
+ };
};
};
@@ -478,10 +529,51 @@
};
};
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
+
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
@@ -490,6 +582,16 @@
clocks = <&clkc CLKID_I2C>;
};
+&saradc {
+ compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+ clocks = <&xtal>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>,
+ <&clkc CLKID_SAR_ADC_CLK>,
+ <&clkc CLKID_SAR_ADC_SEL>;
+ clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
@@ -511,6 +613,27 @@
clock-names = "core", "clkin0", "clkin1";
};
+&spifc {
+ clocks = <&clkc CLKID_SPI>;
+};
+
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
+
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
diff --git a/arch/arm/dts/rk3036-sdk-u-boot.dtsi b/arch/arm/dts/rk3036-sdk-u-boot.dtsi
new file mode 100644
index 0000000..6f15f4a
--- /dev/null
+++ b/arch/arm/dts/rk3036-sdk-u-boot.dtsi
@@ -0,0 +1,11 @@
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&grf {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts
index ccdac1c..37137c2 100644
--- a/arch/arm/dts/rk3229-evb.dts
+++ b/arch/arm/dts/rk3229-evb.dts
@@ -75,3 +75,7 @@
&uart2 {
status = "okay";
};
+
+&usb20_otg {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi
index 7237da4..4f2a1f6 100644
--- a/arch/arm/dts/rk322x.dtsi
+++ b/arch/arm/dts/rk322x.dtsi
@@ -403,6 +403,16 @@
status = "disabled";
};
+ usb20_otg: usb@30040000 {
+ compatible = "rockchip,rk3229-usb", "rockchip,rk3288-usb",
+ "snps,dwc2";
+ reg = <0x30040000 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ hnp-srp-disable;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+
gmac: ethernet@30200000 {
compatible = "rockchip,rk3228-gmac";
reg = <0x30200000 0x10000>;
diff --git a/arch/arm/dts/rk3288-phycore-som.dtsi b/arch/arm/dts/rk3288-phycore-som.dtsi
index fd463f4..02d1196 100644
--- a/arch/arm/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/dts/rk3288-phycore-som.dtsi
@@ -61,6 +61,7 @@
aliases {
rtc0 = &i2c_rtc;
rtc1 = &rk818;
+ eeprom0 = &i2c_eeprom_id;
};
ext_gmac: external-gmac-clock {
@@ -383,6 +384,13 @@
pagesize = <32>;
};
+ /* M24C32-D Identification page */
+ i2c_eeprom_id: eeprom@58 {
+ compatible = "atmel,24c32";
+ reg = <0x58>;
+ pagesize = <32>;
+ };
+
vdd_cpu: regulator@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index 91d3193..3d3f507 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -8,7 +8,7 @@
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3399.dtsi"
-#include "rk3399-sdram-ddr3-1333.dtsi"
+#include "rk3399-sdram-ddr3-1600.dtsi"
/ {
model = "Firefly-RK3399 Board";
@@ -157,8 +157,9 @@
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <430000>;
regulator-max-microvolt = <1400000>;
+ regulator-init-microvolt = <950000>;
};
vccadc_ref: vccadc-ref {
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 1aad6c5..dd1baea 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -12,7 +12,9 @@
compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
config {
- u-boot,spl-payload-offset = <0x40000>; /* 256kbyte */
+ u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
+ u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
};
diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index 2c7fa79..c92c2e2 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -195,7 +195,6 @@
pinctrl-names = "default";
status = "okay";
- mr-nbanks = <1>;
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_4
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index 54f5bc7..783d4e7 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -47,6 +47,8 @@
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
/ {
clocks {
@@ -74,7 +76,7 @@
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
reg = <0xA0000000 0x1000>;
- clocks = <&rcc 0 64>;
+ clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
u-boot,dm-pre-reloc;
};
@@ -86,14 +88,14 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <92>;
spi-max-frequency = <108000000>;
- clocks = <&rcc 0 65>;
+ clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
status = "disabled";
};
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
- clocks = <&rcc 0 164>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
status = "disabled";
u-boot,dm-pre-reloc;
};
@@ -119,7 +121,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x0 0x400>;
- clocks = <&rcc 0 0>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
u-boot,dm-pre-reloc;
};
@@ -129,7 +131,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x400 0x400>;
- clocks = <&rcc 0 1>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
u-boot,dm-pre-reloc;
};
@@ -140,7 +142,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x800 0x400>;
- clocks = <&rcc 0 2>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
u-boot,dm-pre-reloc;
};
@@ -150,7 +152,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0xc00 0x400>;
- clocks = <&rcc 0 3>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
u-boot,dm-pre-reloc;
};
@@ -160,7 +162,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1000 0x400>;
- clocks = <&rcc 0 4>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
u-boot,dm-pre-reloc;
};
@@ -170,7 +172,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1400 0x400>;
- clocks = <&rcc 0 5>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
u-boot,dm-pre-reloc;
};
@@ -180,7 +182,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1800 0x400>;
- clocks = <&rcc 0 6>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
u-boot,dm-pre-reloc;
};
@@ -190,7 +192,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1c00 0x400>;
- clocks = <&rcc 0 7>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
u-boot,dm-pre-reloc;
};
@@ -200,7 +202,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x2000 0x400>;
- clocks = <&rcc 0 8>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
u-boot,dm-pre-reloc;
};
@@ -210,7 +212,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x2400 0x400>;
- clocks = <&rcc 0 9>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
u-boot,dm-pre-reloc;
};
@@ -220,7 +222,7 @@
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x2800 0x400>;
- clocks = <&rcc 0 10>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
index 6591cc8..f34ffcc 100644
--- a/arch/arm/dts/stm32f769-disco.dts
+++ b/arch/arm/dts/stm32f769-disco.dts
@@ -209,7 +209,6 @@
pinctrl-names = "default";
status = "okay";
- mr-nbanks = <1>;
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_32 BANKS_4
diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts
index 62f89d0..f1c9705 100644
--- a/arch/arm/dts/tegra124-nyan-big.dts
+++ b/arch/arm/dts/tegra124-nyan-big.dts
@@ -8,7 +8,6 @@
aliases {
console = &uarta;
- stdout-path = &uarta;
i2c0 = "/i2c@7000d000";
i2c1 = "/i2c@7000c000";
i2c2 = "/i2c@7000c400";
@@ -26,6 +25,10 @@
usb2 = "/usb@7d004000";
};
+ chosen {
+ stdout-path = &uarta;
+ };
+
host1x@50000000 {
dc@54200000 {
display-timings {
diff --git a/arch/arm/dts/uniphier-ld11-global.dts b/arch/arm/dts/uniphier-ld11-global.dts
index 2ed1360..7a650a0 100644
--- a/arch/arm/dts/uniphier-ld11-global.dts
+++ b/arch/arm/dts/uniphier-ld11-global.dts
@@ -68,12 +68,3 @@
&usb2 {
status = "okay";
};
-
-/* for U-Boot only */
-&serial0 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart0 {
- u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/uniphier-ld11-ref.dts b/arch/arm/dts/uniphier-ld11-ref.dts
index 4bdf112..cc8ebe3 100644
--- a/arch/arm/dts/uniphier-ld11-ref.dts
+++ b/arch/arm/dts/uniphier-ld11-ref.dts
@@ -62,12 +62,3 @@
&usb2 {
status = "okay";
};
-
-/* for U-Boot only */
-&serial0 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart0 {
- u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi
index 75dfd1f..74f8f72 100644
--- a/arch/arm/dts/uniphier-ld11.dtsi
+++ b/arch/arm/dts/uniphier-ld11.dtsi
@@ -109,7 +109,6 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
- u-boot,dm-pre-reloc;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
@@ -343,11 +342,9 @@
compatible = "socionext,uniphier-ld11-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
- u-boot,dm-pre-reloc;
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld11-pinctrl";
- u-boot,dm-pre-reloc;
};
};
diff --git a/arch/arm/dts/uniphier-ld20-global.dts b/arch/arm/dts/uniphier-ld20-global.dts
index 535c0ee..9f620d4 100644
--- a/arch/arm/dts/uniphier-ld20-global.dts
+++ b/arch/arm/dts/uniphier-ld20-global.dts
@@ -50,12 +50,3 @@
&i2c0 {
status = "okay";
};
-
-/* for U-Boot only */
-&serial0 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart0 {
- u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/uniphier-ld20-ref.dts b/arch/arm/dts/uniphier-ld20-ref.dts
index 2bcab96..494166a 100644
--- a/arch/arm/dts/uniphier-ld20-ref.dts
+++ b/arch/arm/dts/uniphier-ld20-ref.dts
@@ -50,12 +50,3 @@
&i2c0 {
status = "okay";
};
-
-/* for U-Boot only */
-&serial0 {
- u-boot,dm-pre-reloc;
-};
-
-&pinctrl_uart0 {
- u-boot,dm-pre-reloc;
-};
diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi
index ab031f2..927340f 100644
--- a/arch/arm/dts/uniphier-ld20.dtsi
+++ b/arch/arm/dts/uniphier-ld20.dtsi
@@ -178,7 +178,6 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
- u-boot,dm-pre-reloc;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
@@ -378,11 +377,9 @@
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
- u-boot,dm-pre-reloc;
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld20-pinctrl";
- u-boot,dm-pre-reloc;
};
};
diff --git a/arch/arm/include/asm/arch-meson/gpio.h b/arch/arm/include/asm/arch-meson/gpio.h
new file mode 100644
index 0000000..7079ab3
--- /dev/null
+++ b/arch/arm/include/asm/arch-meson/gpio.h
@@ -0,0 +1,11 @@
+/*
+ * (C) Copyright 2017 - Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MESON_GPIO_H
+#define __ASM_ARCH_MESON_GPIO_H
+
+
+#endif /* __ASM_ARCH_MESON_GPIO_H */
diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h
index 7346876..72d264b 100644
--- a/arch/arm/include/asm/arch-rockchip/boot0.h
+++ b/arch/arm/include/asm/arch-rockchip/boot0.h
@@ -1,3 +1,4 @@
+
/*
* Copyright 2017 Theobroma Systems Design und Consulting GmbH
*
@@ -13,7 +14,17 @@
*/
#ifdef CONFIG_SPL_BUILD
- .space 0x4 /* space for the 'RK33' */
+ /*
+ * We need to add 4 bytes of space for the 'RK33' at the
+ * beginning of the executable. However, as we want to keep
+ * this generic and make it applicable to builds that are like
+ * the RK3368 (TPL needs this, SPL doesn't) or the RK3399 (no
+ * TPL, but extra space needed in the SPL), we simply repeat
+ * the 'b reset' with the expectation that the first one will
+ * be overwritten, if this is the first stage contained in the
+ * final image created with mkimage)...
+ */
+ b reset /* may be overwritten --- should be 'nop' or a 'b reset' */
#endif
b reset
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
index 4910ee7..24a9cc0 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
@@ -51,8 +51,6 @@
struct rk3368_clk_priv {
struct rk3368_cru *cru;
- ulong rate;
- bool has_bwadj;
};
enum {
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
index cf830d0..033f067 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h
@@ -12,12 +12,10 @@
/* Private data for the clock driver - used by rockchip_get_cru() */
struct rk3399_clk_priv {
struct rk3399_cru *cru;
- ulong rate;
};
struct rk3399_pmuclk_priv {
struct rk3399_pmucru *pmucru;
- ulong rate;
};
struct rk3399_pmucru {
diff --git a/arch/arm/include/asm/arch-rockchip/pwm.h b/arch/arm/include/asm/arch-rockchip/pwm.h
index 08ff945..b1d8047 100644
--- a/arch/arm/include/asm/arch-rockchip/pwm.h
+++ b/arch/arm/include/asm/arch-rockchip/pwm.h
@@ -25,9 +25,11 @@
#define PWM_DUTY_POSTIVE (1 << 3)
#define PWM_DUTY_NEGATIVE (0 << 3)
+#define PWM_DUTY_MASK (1 << 3)
#define PWM_INACTIVE_POSTIVE (1 << 4)
#define PWM_INACTIVE_NEGATIVE (0 << 4)
+#define PWM_INACTIVE_MASK (1 << 4)
#define PWM_OUTPUT_LEFT (0 << 5)
#define PWM_OUTPUT_CENTER (1 << 5)
diff --git a/arch/arm/include/asm/arch-rockchip/timer.h b/arch/arm/include/asm/arch-rockchip/timer.h
index 1d044bb..c23c509 100644
--- a/arch/arm/include/asm/arch-rockchip/timer.h
+++ b/arch/arm/include/asm/arch-rockchip/timer.h
@@ -8,12 +8,12 @@
#define __ASM_ARCH_TIMER_H
struct rk_timer {
- unsigned int timer_load_count0;
- unsigned int timer_load_count1;
- unsigned int timer_curr_value0;
- unsigned int timer_curr_value1;
- unsigned int timer_ctrl_reg;
- unsigned int timer_int_status;
+ u32 timer_load_count0;
+ u32 timer_load_count1;
+ u32 timer_curr_value0;
+ u32 timer_curr_value1;
+ u32 timer_ctrl_reg;
+ u32 timer_int_status;
};
void rockchip_timer_init(void);
diff --git a/arch/arm/include/asm/arch-stm32f7/fmc.h b/arch/arm/include/asm/arch-stm32f7/fmc.h
deleted file mode 100644
index 4741e5a..0000000
--- a/arch/arm/include/asm/arch-stm32f7/fmc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2013
- * Pavel Boldin, Emcraft Systems, paboldin@emcraft.com
- *
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _MACH_FMC_H_
-#define _MACH_FMC_H_
-
-struct stm32_fmc_regs {
- u32 sdcr1; /* Control register 1 */
- u32 sdcr2; /* Control register 2 */
- u32 sdtr1; /* Timing register 1 */
- u32 sdtr2; /* Timing register 2 */
- u32 sdcmr; /* Mode register */
- u32 sdrtr; /* Refresh timing register */
- u32 sdsr; /* Status register */
-};
-
-/*
- * FMC registers base
- */
-#define STM32_SDRAM_FMC ((struct stm32_fmc_regs *)SDRAM_FMC_BASE)
-
-/* Control register SDCR */
-#define FMC_SDCR_RPIPE_SHIFT 13 /* RPIPE bit shift */
-#define FMC_SDCR_RBURST_SHIFT 12 /* RBURST bit shift */
-#define FMC_SDCR_SDCLK_SHIFT 10 /* SDRAM clock divisor shift */
-#define FMC_SDCR_WP_SHIFT 9 /* Write protection shift */
-#define FMC_SDCR_CAS_SHIFT 7 /* CAS latency shift */
-#define FMC_SDCR_NB_SHIFT 6 /* Number of banks shift */
-#define FMC_SDCR_MWID_SHIFT 4 /* Memory width shift */
-#define FMC_SDCR_NR_SHIFT 2 /* Number of row address bits shift */
-#define FMC_SDCR_NC_SHIFT 0 /* Number of col address bits shift */
-
-/* Timings register SDTR */
-#define FMC_SDTR_TMRD_SHIFT 0 /* Load mode register to active */
-#define FMC_SDTR_TXSR_SHIFT 4 /* Exit self-refresh time */
-#define FMC_SDTR_TRAS_SHIFT 8 /* Self-refresh time */
-#define FMC_SDTR_TRC_SHIFT 12 /* Row cycle delay */
-#define FMC_SDTR_TWR_SHIFT 16 /* Recovery delay */
-#define FMC_SDTR_TRP_SHIFT 20 /* Row precharge delay */
-#define FMC_SDTR_TRCD_SHIFT 24 /* Row-to-column delay */
-
-
-#define FMC_SDCMR_NRFS_SHIFT 5
-
-#define FMC_SDCMR_MODE_NORMAL 0
-#define FMC_SDCMR_MODE_START_CLOCK 1
-#define FMC_SDCMR_MODE_PRECHARGE 2
-#define FMC_SDCMR_MODE_AUTOREFRESH 3
-#define FMC_SDCMR_MODE_WRITE_MODE 4
-#define FMC_SDCMR_MODE_SELFREFRESH 5
-#define FMC_SDCMR_MODE_POWERDOWN 6
-
-#define FMC_SDCMR_BANK_1 BIT(4)
-#define FMC_SDCMR_BANK_2 BIT(3)
-
-#define FMC_SDCMR_MODE_REGISTER_SHIFT 9
-
-#define FMC_SDSR_BUSY BIT(5)
-
-#define FMC_BUSY_WAIT() do { \
- __asm__ __volatile__ ("dsb" : : : "memory"); \
- while (STM32_SDRAM_FMC->sdsr & FMC_SDSR_BUSY) \
- ; \
- } while (0)
-
-
-#endif /* _MACH_FMC_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f7/rcc.h b/arch/arm/include/asm/arch-stm32f7/rcc.h
index 0f8d50b..a33f8cf 100644
--- a/arch/arm/include/asm/arch-stm32f7/rcc.h
+++ b/arch/arm/include/asm/arch-stm32f7/rcc.h
@@ -8,44 +8,24 @@
#ifndef _STM32_RCC_H
#define _STM32_RCC_H
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
/*
* RCC AHB1ENR specific definitions
*/
-#define RCC_AHB1ENR_GPIO_A_EN BIT(0)
-#define RCC_AHB1ENR_GPIO_B_EN BIT(1)
-#define RCC_AHB1ENR_GPIO_C_EN BIT(2)
-#define RCC_AHB1ENR_GPIO_D_EN BIT(3)
-#define RCC_AHB1ENR_GPIO_E_EN BIT(4)
-#define RCC_AHB1ENR_GPIO_F_EN BIT(5)
-#define RCC_AHB1ENR_GPIO_G_EN BIT(6)
-#define RCC_AHB1ENR_GPIO_H_EN BIT(7)
-#define RCC_AHB1ENR_GPIO_I_EN BIT(8)
-#define RCC_AHB1ENR_GPIO_J_EN BIT(9)
-#define RCC_AHB1ENR_GPIO_K_EN BIT(10)
#define RCC_AHB1ENR_ETHMAC_EN BIT(25)
#define RCC_AHB1ENR_ETHMAC_TX_EN BIT(26)
#define RCC_AHB1ENR_ETHMAC_RX_EN BIT(27)
-#define RCC_AHB1ENR_ETHMAC_PTP_EN BIT(28)
-
-/*
- * RCC AHB3ENR specific definitions
- */
-#define RCC_AHB3ENR_FMC_EN BIT(0)
-#define RCC_AHB3ENR_QSPI_EN BIT(1)
/*
* RCC APB1ENR specific definitions
*/
#define RCC_APB1ENR_TIM2EN BIT(0)
-#define RCC_APB1ENR_USART2EN BIT(17)
-#define RCC_APB1ENR_USART3EN BIT(18)
#define RCC_APB1ENR_PWREN BIT(28)
/*
* RCC APB2ENR specific definitions
*/
-#define RCC_APB2ENR_USART1EN BIT(4)
-#define RCC_APB2ENR_USART6EN BIT(5)
#define RCC_APB2ENR_SYSCFGEN BIT(14)
#endif
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
index 14e3398..87aee60 100644
--- a/arch/arm/include/asm/arch-stm32f7/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
@@ -57,12 +57,6 @@
[5 ... 7] = 256 * 1024
};
-enum clock {
- CLOCK_CORE,
- CLOCK_AHB,
- CLOCK_APB1,
- CLOCK_APB2
-};
#define STM32_BUS_MASK GENMASK(31, 16)
struct stm32_rcc_regs {
@@ -101,11 +95,6 @@
};
#define STM32_RCC ((struct stm32_rcc_regs *)RCC_BASE)
-struct stm32_rcc_ext_f7_regs {
- u32 dckcfgr2; /* dedicated clocks configuration register */
-};
-#define STM32_RCC_EXT_F7 ((struct stm32_rcc_ext_f7_regs *) (RCC_BASE + sizeof(struct stm32_rcc_regs)))
-
struct stm32_pwr_regs {
u32 cr1; /* power control register 1 */
u32 csr1; /* power control/status register 2 */
@@ -114,8 +103,6 @@
};
#define STM32_PWR ((struct stm32_pwr_regs *)PWR_BASE)
-int configure_clocks(void);
-unsigned long clock_get(enum clock clck);
void stm32_flash_latency_cfg(int latency);
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
index 3c5604a..9c1ec02 100644
--- a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
+++ b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
@@ -21,24 +21,9 @@
};
enum periph_clock {
- USART1_CLOCK_CFG = 0,
- USART2_CLOCK_CFG,
- GPIO_A_CLOCK_CFG,
- GPIO_B_CLOCK_CFG,
- GPIO_C_CLOCK_CFG,
- GPIO_D_CLOCK_CFG,
- GPIO_E_CLOCK_CFG,
- GPIO_F_CLOCK_CFG,
- GPIO_G_CLOCK_CFG,
- GPIO_H_CLOCK_CFG,
- GPIO_I_CLOCK_CFG,
- GPIO_J_CLOCK_CFG,
- GPIO_K_CLOCK_CFG,
SYSCFG_CLOCK_CFG,
TIMER2_CLOCK_CFG,
- FMC_CLOCK_CFG,
STMMAC_CLOCK_CFG,
- QSPI_CLOCK_CFG,
};
#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index f62b2a4..92180db 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -266,7 +266,7 @@
* @param node Node to look at
* @return peripheral ID, or PERIPH_ID_NONE if none
*/
-enum periph_id clock_decode_periph_id(const void *blob, int node);
+int clock_decode_periph_id(struct udevice *dev);
/**
* Checks if the oscillator bypass is enabled (XOBP bit)
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index 3add1b3..3b9711d 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -97,6 +97,11 @@
TEGRA_SOC_UNKNOWN = -1,
};
+/* Tegra system controller (SYSCON) devices */
+enum {
+ TEGRA_SYSCON_PMC,
+};
+
#else /* __ASSEMBLY__ */
#define PRM_RSTCTRL NV_PA_PMC_BASE
#endif
diff --git a/arch/arm/include/asm/arch-tegra/xusb-padctl.h b/arch/arm/include/asm/arch-tegra/xusb-padctl.h
index b4b4c8b..deccdf4 100644
--- a/arch/arm/include/asm/arch-tegra/xusb-padctl.h
+++ b/arch/arm/include/asm/arch-tegra/xusb-padctl.h
@@ -15,7 +15,7 @@
*/
struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type);
-void tegra_xusb_padctl_init(const void *fdt);
+void tegra_xusb_padctl_init(void);
int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy);
int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy);
int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy);
diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h
index 5a53e40..9dbb2c4 100644
--- a/arch/arm/include/asm/ehci-omap.h
+++ b/arch/arm/include/asm/ehci-omap.h
@@ -19,11 +19,7 @@
OMAP_EHCI_PORT_MODE_HSIC,
};
-#ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
-#define OMAP_HS_USB_PORTS CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
-#else
#define OMAP_HS_USB_PORTS 3
-#endif
#define is_ehci_phy_mode(x) ((x) == OMAP_EHCI_PORT_MODE_PHY)
#define is_ehci_tll_mode(x) ((x) == OMAP_EHCI_PORT_MODE_TLL)
diff --git a/arch/arm/mach-keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c
index 591e758..c2525bd 100644
--- a/arch/arm/mach-keystone/cmd_mon.c
+++ b/arch/arm/mach-keystone/cmd_mon.c
@@ -19,6 +19,7 @@
u32 addr, dpsc_base = 0x1E80000, freq, load_addr, size;
int rcode = 0;
struct image_header *header;
+ u32 ecrypt_bm_addr = 0;
if (argc < 2)
return CMD_RET_USAGE;
@@ -39,14 +40,17 @@
memcpy((void *)load_addr, (void *)(addr + sizeof(struct image_header)),
size);
- rcode = mon_install(load_addr, dpsc_base, freq);
+ if (argc >= 3)
+ ecrypt_bm_addr = simple_strtoul(argv[2], NULL, 16);
+
+ rcode = mon_install(load_addr, dpsc_base, freq, ecrypt_bm_addr);
printf("## installed monitor @ 0x%x, freq [%d], status %d\n",
load_addr, freq, rcode);
return 0;
}
-U_BOOT_CMD(mon_install, 2, 0, do_mon_install,
+U_BOOT_CMD(mon_install, 3, 0, do_mon_install,
"Install boot kernel at 'addr'",
""
);
diff --git a/arch/arm/mach-keystone/include/mach/mon.h b/arch/arm/mach-keystone/include/mach/mon.h
index eb7aa93..30c57e0 100644
--- a/arch/arm/mach-keystone/include/mach/mon.h
+++ b/arch/arm/mach-keystone/include/mach/mon.h
@@ -10,7 +10,7 @@
#ifndef _MACH_MON_H_
#define _MACH_MON_H_
-int mon_install(u32 addr, u32 dpsc, u32 freq);
+int mon_install(u32 addr, u32 dpsc, u32 freq, u32 bm_addr);
int mon_power_on(int core_id, void *ep);
int mon_power_off(int core_id);
diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c
index ebfb483..dd446ab 100644
--- a/arch/arm/mach-keystone/mon.c
+++ b/arch/arm/mach-keystone/mon.c
@@ -13,7 +13,7 @@
#include <spl.h>
asm(".arch_extension sec\n\t");
-int mon_install(u32 addr, u32 dpsc, u32 freq)
+int mon_install(u32 addr, u32 dpsc, u32 freq, u32 bm_addr)
{
int result;
@@ -22,11 +22,13 @@
"mov r0, %1\n"
"mov r1, %2\n"
"mov r2, %3\n"
+ "mov r3, %4\n"
"blx r0\n"
+ "mov %0, r0\n"
"ldmfd r13!, {lr}\n"
: "=&r" (result)
- : "r" (addr), "r" (dpsc), "r" (freq)
- : "cc", "r0", "r1", "r2", "memory");
+ : "r" (addr), "r" (dpsc), "r" (freq), "r" (bm_addr)
+ : "cc", "r0", "r1", "r2", "r3", "memory");
return result;
}
@@ -40,6 +42,7 @@
"mov r2, %2\n"
"mov r0, #0\n"
"smc #0\n"
+ "mov %0, r0\n"
"ldmfd r13!, {lr}\n"
: "=&r" (result)
: "r" (core_id), "r" (ep)
@@ -56,6 +59,7 @@
"mov r1, %1\n"
"mov r0, #1\n"
"smc #1\n"
+ "mov %0, r0\n"
"ldmfd r13!, {lr}\n"
: "=&r" (result)
: "r" (core_id)
@@ -89,6 +93,7 @@
"mov r0, %1\n"
"mov r1, %2\n"
"smc #2\n"
+ "mov %0, r0\n"
"ldmfd r13!, {r4-r12, lr}\n"
: "=&r" (result)
: "r" (cmd), "r" (arg1)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index bb44c61..c924613 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -82,6 +82,8 @@
select SUPPORT_SPL
select SPL
select SPL_SEPARATE_BSS
+ select SPL_SERIAL_SUPPORT
+ select SPL_DRIVERS_MISC_SUPPORT
select ENABLE_ARM_SOC_BOOT0_HOOK
select DEBUG_UART_BOARD_INIT
help
diff --git a/arch/arm/mach-rockchip/bootrom.c b/arch/arm/mach-rockchip/bootrom.c
index da36f92..4ca9962 100644
--- a/arch/arm/mach-rockchip/bootrom.c
+++ b/arch/arm/mach-rockchip/bootrom.c
@@ -9,8 +9,8 @@
void back_to_bootrom(void)
{
-#if defined(CONFIG_SPL_LIBGENERIC_SUPPORT) && !defined(CONFIG_TPL_BUILD)
- printf("Returning to boot ROM...");
+#if defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && !defined(CONFIG_TPL_BUILD)
+ puts("Returning to boot ROM...");
#endif
_back_to_bootrom_s();
}
diff --git a/arch/arm/mach-rockchip/rk3036-board-spl.c b/arch/arm/mach-rockchip/rk3036-board-spl.c
index 7b8d0ee..9458201 100644
--- a/arch/arm/mach-rockchip/rk3036-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3036-board-spl.c
@@ -53,9 +53,3 @@
while (1)
;
}
-
-void hang(void)
-{
- while (1)
- ;
-}
diff --git a/arch/arm/mach-rockchip/rk_timer.c b/arch/arm/mach-rockchip/rk_timer.c
index ae5123d..853b986 100644
--- a/arch/arm/mach-rockchip/rk_timer.c
+++ b/arch/arm/mach-rockchip/rk_timer.c
@@ -4,9 +4,9 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <common.h>
#include <asm/arch/timer.h>
#include <asm/io.h>
-#include <common.h>
#include <linux/types.h>
struct rk_timer * const timer_ptr = (void *)CONFIG_SYS_TIMER_BASE;
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 4838758..58085dc 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -88,6 +88,8 @@
bool "Tegra124 family"
select TEGRA_ARMV7_COMMON
imply ENV_IS_IN_MMC
+ imply REGMAP
+ imply SYSCON
config TEGRA210
bool "Tegra210 family"
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index 6b5fa7d..bd13796 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -29,7 +29,6 @@
#ifdef CONFIG_TEGRA_CLOCK_SCALING
#include <asm/arch/emc.h>
#endif
-#include <power/as3722.h>
#include "emc.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -142,11 +141,6 @@
debug("Memory controller init failed: %d\n", err);
# endif
# endif /* CONFIG_TEGRA_PMU */
-#ifdef CONFIG_PMIC_AS3722
- err = as3722_init(NULL);
- if (err && err != -ENODEV)
- return err;
-#endif
#endif /* CONFIG_SYS_I2C_TEGRA */
#ifdef CONFIG_USB_EHCI_TEGRA
@@ -166,7 +160,7 @@
pin_mux_nand();
#endif
- tegra_xusb_padctl_init(gd->fdt_blob);
+ tegra_xusb_padctl_init();
#ifdef CONFIG_TEGRA_LP0
/* save Sdram params to PMC 2, 4, and 24 for WB0 */
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 668bbd2..dc58b30 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -655,14 +655,13 @@
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
-int clock_decode_periph_id(const void *blob, int node)
+int clock_decode_periph_id(struct udevice *dev)
{
enum periph_id id;
u32 cell[2];
int err;
- err = fdtdec_get_int_array(blob, node, "clocks", cell,
- ARRAY_SIZE(cell));
+ err = dev_read_u32_array(dev, "clocks", cell, ARRAY_SIZE(cell));
if (err)
return -1;
id = clk_id_to_periph_id(cell[1]);
diff --git a/arch/arm/mach-tegra/spl.c b/arch/arm/mach-tegra/spl.c
index 41c88cb..189b3da 100644
--- a/arch/arm/mach-tegra/spl.c
+++ b/arch/arm/mach-tegra/spl.c
@@ -7,6 +7,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <debug_uart.h>
#include <spl.h>
#include <asm/io.h>
@@ -32,6 +33,9 @@
gpio_early_init_uart();
clock_early_init();
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
preloader_console_init();
}
diff --git a/arch/arm/mach-tegra/tegra124/Makefile b/arch/arm/mach-tegra/tegra124/Makefile
index c00de61..d275daf 100644
--- a/arch/arm/mach-tegra/tegra124/Makefile
+++ b/arch/arm/mach-tegra/tegra124/Makefile
@@ -10,6 +10,7 @@
obj-y += clock.o
obj-y += funcmux.o
obj-y += pinmux.o
+obj-y += pmc.o
obj-y += xusb-padctl.o
obj-y += ../xusb-padctl-common.o
diff --git a/arch/arm/mach-tegra/tegra124/pmc.c b/arch/arm/mach-tegra/tegra124/pmc.c
new file mode 100644
index 0000000..be82acf
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra124/pmc.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2017 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+
+static const struct udevice_id tegra124_syscon_ids[] = {
+ { .compatible = "nvidia,tegra124-pmc", .data = TEGRA_SYSCON_PMC },
+};
+
+U_BOOT_DRIVER(syscon_tegra124) = {
+ .name = "tegra124_syscon",
+ .id = UCLASS_SYSCON,
+ .of_match = tegra124_syscon_ids,
+};
diff --git a/arch/arm/mach-tegra/tegra124/xusb-padctl.c b/arch/arm/mach-tegra/tegra124/xusb-padctl.c
index 76af924..d326a6a 100644
--- a/arch/arm/mach-tegra/tegra124/xusb-padctl.c
+++ b/arch/arm/mach-tegra/tegra124/xusb-padctl.c
@@ -8,6 +8,8 @@
#include <common.h>
#include <errno.h>
+#include <dm/of_access.h>
+#include <dm/ofnode.h>
#include "../xusb-padctl-common.h"
@@ -317,13 +319,33 @@
.num_phys = ARRAY_SIZE(tegra124_phys),
};
-void tegra_xusb_padctl_init(const void *fdt)
+void tegra_xusb_padctl_init(void)
{
- int count, nodes[1];
+ ofnode nodes[1];
+ int count = 0;
+ int ret;
- count = fdtdec_find_aliases_for_id(fdt, "padctl",
- COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL,
- nodes, ARRAY_SIZE(nodes));
- if (tegra_xusb_process_nodes(fdt, nodes, count, &tegra124_socdata))
- return;
+ debug("%s: start\n", __func__);
+ if (of_live_active()) {
+ struct device_node *np = of_find_compatible_node(NULL, NULL,
+ "nvidia,tegra124-xusb-padctl");
+
+ debug("np=%p\n", np);
+ if (np) {
+ nodes[0] = np_to_ofnode(np);
+ count = 1;
+ }
+ } else {
+ int node_offsets[1];
+ int i;
+
+ count = fdtdec_find_aliases_for_id(gd->fdt_blob, "padctl",
+ COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL,
+ node_offsets, ARRAY_SIZE(node_offsets));
+ for (i = 0; i < count; i++)
+ nodes[i] = offset_to_ofnode(node_offsets[i]);
+ }
+
+ ret = tegra_xusb_process_nodes(nodes, count, &tegra124_socdata);
+ debug("%s: done, ret=%d\n", __func__, ret);
}
diff --git a/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/arch/arm/mach-tegra/tegra210/xusb-padctl.c
index 9ec93e7..bf85e07 100644
--- a/arch/arm/mach-tegra/tegra210/xusb-padctl.c
+++ b/arch/arm/mach-tegra/tegra210/xusb-padctl.c
@@ -8,6 +8,8 @@
#include <common.h>
#include <errno.h>
+#include <dm/of_access.h>
+#include <dm/ofnode.h>
#include "../xusb-padctl-common.h"
@@ -15,6 +17,8 @@
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+DECLARE_GLOBAL_DATA_PTR;
+
enum tegra210_function {
TEGRA210_FUNC_SNPS,
TEGRA210_FUNC_XUSB,
@@ -421,17 +425,33 @@
.num_phys = ARRAY_SIZE(tegra210_phys),
};
-void tegra_xusb_padctl_init(const void *fdt)
+void tegra_xusb_padctl_init(void)
{
- int count, nodes[1];
+ ofnode nodes[1];
+ int count = 0;
+ int ret;
- debug("> %s(fdt=%p)\n", __func__, fdt);
+ debug("%s: start\n", __func__);
+ if (of_live_active()) {
+ struct device_node *np = of_find_compatible_node(NULL, NULL,
+ "nvidia,tegra210-xusb-padctl");
- count = fdtdec_find_aliases_for_id(fdt, "padctl",
- COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL,
- nodes, ARRAY_SIZE(nodes));
- if (tegra_xusb_process_nodes(fdt, nodes, count, &tegra210_socdata))
- return;
+ debug("np=%p\n", np);
+ if (np) {
+ nodes[0] = np_to_ofnode(np);
+ count = 1;
+ }
+ } else {
+ int node_offsets[1];
+ int i;
- debug("< %s()\n", __func__);
+ count = fdtdec_find_aliases_for_id(gd->fdt_blob, "padctl",
+ COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL,
+ node_offsets, ARRAY_SIZE(node_offsets));
+ for (i = 0; i < count; i++)
+ nodes[i] = offset_to_ofnode(node_offsets[i]);
+ }
+
+ ret = tegra_xusb_process_nodes(nodes, count, &tegra210_socdata);
+ debug("%s: done, ret=%d\n", __func__, ret);
}
diff --git a/arch/arm/mach-tegra/xusb-padctl-common.c b/arch/arm/mach-tegra/xusb-padctl-common.c
index 43f5bb7..37b5b8f 100644
--- a/arch/arm/mach-tegra/xusb-padctl-common.c
+++ b/arch/arm/mach-tegra/xusb-padctl-common.c
@@ -75,14 +75,14 @@
static int
tegra_xusb_padctl_group_parse_dt(struct tegra_xusb_padctl *padctl,
struct tegra_xusb_padctl_group *group,
- const void *fdt, int node)
+ ofnode node)
{
unsigned int i;
- int len;
+ int len, ret;
- group->name = fdt_get_name(fdt, node, &len);
+ group->name = ofnode_get_name(node);
- len = fdt_stringlist_count(fdt, node, "nvidia,lanes");
+ len = ofnode_read_string_count(node, "nvidia,lanes");
if (len < 0) {
error("failed to parse \"nvidia,lanes\" property");
return -EINVAL;
@@ -91,9 +91,9 @@
group->num_pins = len;
for (i = 0; i < group->num_pins; i++) {
- group->pins[i] = fdt_stringlist_get(fdt, node, "nvidia,lanes",
- i, NULL);
- if (!group->pins[i]) {
+ ret = ofnode_read_string_index(node, "nvidia,lanes", i,
+ &group->pins[i]);
+ if (ret) {
error("failed to read string from \"nvidia,lanes\" property");
return -EINVAL;
}
@@ -101,13 +101,14 @@
group->num_pins = len;
- group->func = fdt_stringlist_get(fdt, node, "nvidia,function", 0, NULL);
- if (!group->func) {
+ ret = ofnode_read_string_index(node, "nvidia,function", 0,
+ &group->func);
+ if (ret) {
error("failed to parse \"nvidia,func\" property");
return -EINVAL;
}
- group->iddq = fdtdec_get_int(fdt, node, "nvidia,iddq", -1);
+ group->iddq = ofnode_read_u32_default(node, "nvidia,iddq", -1);
return 0;
}
@@ -217,20 +218,21 @@
static int
tegra_xusb_padctl_config_parse_dt(struct tegra_xusb_padctl *padctl,
struct tegra_xusb_padctl_config *config,
- const void *fdt, int node)
+ ofnode node)
{
- int subnode;
+ ofnode subnode;
- config->name = fdt_get_name(fdt, node, NULL);
+ config->name = ofnode_get_name(node);
- fdt_for_each_subnode(subnode, fdt, node) {
+ for (subnode = ofnode_first_subnode(node);
+ ofnode_valid(subnode);
+ subnode = ofnode_next_subnode(subnode)) {
struct tegra_xusb_padctl_group *group;
int err;
group = &config->groups[config->num_groups];
- err = tegra_xusb_padctl_group_parse_dt(padctl, group, fdt,
- subnode);
+ err = tegra_xusb_padctl_group_parse_dt(padctl, group, subnode);
if (err < 0) {
error("failed to parse group %s", group->name);
return err;
@@ -243,20 +245,24 @@
}
static int tegra_xusb_padctl_parse_dt(struct tegra_xusb_padctl *padctl,
- const void *fdt, int node)
+ ofnode node)
{
- int subnode, err;
+ ofnode subnode;
+ int err;
- err = fdt_get_resource(fdt, node, "reg", 0, &padctl->regs);
+ err = ofnode_read_resource(node, 0, &padctl->regs);
if (err < 0) {
error("registers not found");
return err;
}
- fdt_for_each_subnode(subnode, fdt, node) {
+ for (subnode = ofnode_first_subnode(node);
+ ofnode_valid(subnode);
+ subnode = ofnode_next_subnode(subnode)) {
struct tegra_xusb_padctl_config *config = &padctl->config;
- err = tegra_xusb_padctl_config_parse_dt(padctl, config, fdt,
+ debug("%s: subnode=%s\n", __func__, ofnode_get_name(subnode));
+ err = tegra_xusb_padctl_config_parse_dt(padctl, config,
subnode);
if (err < 0) {
error("failed to parse entry %s: %d",
@@ -264,25 +270,28 @@
continue;
}
}
+ debug("%s: done\n", __func__);
return 0;
}
struct tegra_xusb_padctl padctl;
-int tegra_xusb_process_nodes(const void *fdt, int nodes[], unsigned int count,
- const struct tegra_xusb_padctl_soc *socdata)
+int tegra_xusb_process_nodes(ofnode nodes[], unsigned int count,
+ const struct tegra_xusb_padctl_soc *socdata)
{
unsigned int i;
int err;
+ debug("%s: count=%d\n", __func__, count);
for (i = 0; i < count; i++) {
- if (!fdtdec_get_is_enabled(fdt, nodes[i]))
+ debug("%s: i=%d, node=%p\n", __func__, i, nodes[i].np);
+ if (!ofnode_is_available(nodes[i]))
continue;
padctl.socdata = socdata;
- err = tegra_xusb_padctl_parse_dt(&padctl, fdt, nodes[i]);
+ err = tegra_xusb_padctl_parse_dt(&padctl, nodes[i]);
if (err < 0) {
error("failed to parse DT: %d", err);
continue;
@@ -300,6 +309,7 @@
/* only a single instance is supported */
break;
}
+ debug("%s: done\n", __func__);
return 0;
}
diff --git a/arch/arm/mach-tegra/xusb-padctl-common.h b/arch/arm/mach-tegra/xusb-padctl-common.h
index f44790a..6836588 100644
--- a/arch/arm/mach-tegra/xusb-padctl-common.h
+++ b/arch/arm/mach-tegra/xusb-padctl-common.h
@@ -9,9 +9,11 @@
#include <common.h>
#include <fdtdec.h>
+#include <dm/ofnode.h>
#include <asm/io.h>
#include <asm/arch-tegra/xusb-padctl.h>
+#include <linux/ioport.h>
struct tegra_xusb_padctl_lane {
const char *name;
@@ -77,7 +79,7 @@
struct tegra_xusb_padctl {
const struct tegra_xusb_padctl_soc *socdata;
struct tegra_xusb_padctl_config config;
- struct fdt_resource regs;
+ struct resource regs;
unsigned int enable;
};
@@ -95,7 +97,7 @@
writel(value, padctl->regs.start + offset);
}
-int tegra_xusb_process_nodes(const void *fdt, int nodes[], unsigned int count,
- const struct tegra_xusb_padctl_soc *socdata);
+int tegra_xusb_process_nodes(ofnode nodes[], unsigned int count,
+ const struct tegra_xusb_padctl_soc *socdata);
#endif
diff --git a/arch/arm/mach-tegra/xusb-padctl-dummy.c b/arch/arm/mach-tegra/xusb-padctl-dummy.c
index 65f8d2e..856d712 100644
--- a/arch/arm/mach-tegra/xusb-padctl-dummy.c
+++ b/arch/arm/mach-tegra/xusb-padctl-dummy.c
@@ -34,6 +34,6 @@
return -ENOSYS;
}
-void __weak tegra_xusb_padctl_init(const void *fdt)
+void __weak tegra_xusb_padctl_init(void)
{
}
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 5739325..1aed55a 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -10,14 +10,6 @@
select ARMV7_NONSEC
select ARCH_SUPPORT_PSCI
-config ARCH_UNIPHIER_64BIT
- bool
- select ARM64
- select CMD_UNZIP
- select SPL_SEPARATE_BSS if SPL
- select ARMV8_MULTIENTRY if SPL
- select ARMV8_SPIN_TABLE if SPL
-
choice
prompt "UniPhier SoC select"
default ARCH_UNIPHIER_PRO4
@@ -38,18 +30,11 @@
bool "UniPhier Pro5/PXs2/LD6b SoCs"
select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_LD11_SINGLE
- bool "UniPhier LD11 SoC"
- select ARCH_UNIPHIER_64BIT
-
-config ARCH_UNIPHIER_LD20_SINGLE
- bool "UniPhier LD20 SoC"
- select ARCH_UNIPHIER_64BIT
-
config ARCH_UNIPHIER_V8_MULTI
bool "UniPhier V8 SoCs"
depends on !SPL
- select ARCH_UNIPHIER_64BIT
+ select ARM64
+ select CMD_UNZIP
endchoice
@@ -79,13 +64,13 @@
default y
config ARCH_UNIPHIER_LD11
- bool "Enable UniPhier LD11 SoC support" if ARCH_UNIPHIER_V8_MULTI
- depends on ARCH_UNIPHIER_LD11_SINGLE || ARCH_UNIPHIER_V8_MULTI
+ bool "Enable UniPhier LD11 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
default y
config ARCH_UNIPHIER_LD20
- bool "Enable UniPhier LD20 SoC support" if ARCH_UNIPHIER_V8_MULTI
- depends on ARCH_UNIPHIER_LD20_SINGLE || ARCH_UNIPHIER_V8_MULTI
+ bool "Enable UniPhier LD20 SoC support"
+ depends on ARCH_UNIPHIER_V8_MULTI
select OF_BOARD_SETUP
default y
diff --git a/arch/arm/mach-uniphier/arm64/Makefile b/arch/arm/mach-uniphier/arm64/Makefile
index 06072f2..12d91e0 100644
--- a/arch/arm/mach-uniphier/arm64/Makefile
+++ b/arch/arm/mach-uniphier/arm64/Makefile
@@ -2,14 +2,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifdef CONFIG_SPL_BUILD
-obj-y += timer.o
-else
obj-y += mem_map.o
-ifdef CONFIG_ARMV8_MULTIENTRY
-obj-y += smp.o smp_kick_cpus.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20) += arm-cci500.o
-else
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += lowlevel_init.o
-endif
-endif
diff --git a/arch/arm/mach-uniphier/arm64/arm-cci500.c b/arch/arm/mach-uniphier/arm64/arm-cci500.c
deleted file mode 100644
index bf0fad4..0000000
--- a/arch/arm/mach-uniphier/arm64/arm-cci500.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Initialization of ARM Corelink CCI-500 Cache Coherency Interconnect
- *
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#include "../init.h"
-
-#define CCI500_BASE 0x5FD00000
-#define CCI500_SLAVE_OFFSET 0x1000
-
-#define CCI500_SNOOP_CTRL
-#define CCI500_SNOOP_CTRL_EN_DVM BIT(1)
-#define CCI500_SNOOP_CTRL_EN_SNOOP BIT(0)
-
-void cci500_init(unsigned int nr_slaves)
-{
- unsigned long slave_base = CCI500_BASE + CCI500_SLAVE_OFFSET;
- int i;
-
- for (i = 0; i < nr_slaves; i++) {
- void __iomem *base;
- u32 tmp;
-
- base = ioremap(slave_base, SZ_4K);
-
- tmp = readl(base);
- tmp |= CCI500_SNOOP_CTRL_EN_DVM | CCI500_SNOOP_CTRL_EN_SNOOP;
- writel(tmp, base);
-
- iounmap(base);
-
- slave_base += CCI500_SLAVE_OFFSET;
- }
-}
diff --git a/arch/arm/mach-uniphier/arm64/smp.S b/arch/arm/mach-uniphier/arm64/smp.S
deleted file mode 100644
index 9348ec9..0000000
--- a/arch/arm/mach-uniphier/arm64/smp.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/linkage.h>
-
-ENTRY(uniphier_smp_setup)
- mrs x0, s3_1_c15_c2_1 /* CPUECTLR_EL1 */
- orr x0, x0, #(1 << 6) /* SMPEN */
- msr s3_1_c15_c2_1, x0
- ret
-ENDPROC(uniphier_smp_setup)
-
-ENTRY(uniphier_secondary_startup)
- bl uniphier_smp_setup
- b _start
-ENDPROC(uniphier_secondary_startup)
diff --git a/arch/arm/mach-uniphier/arm64/smp_kick_cpus.c b/arch/arm/mach-uniphier/arm64/smp_kick_cpus.c
deleted file mode 100644
index 8e5b198..0000000
--- a/arch/arm/mach-uniphier/arm64/smp_kick_cpus.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#include "../init.h"
-
-#define UNIPHIER_SMPCTRL_ROM_RSV0 0x59801200
-
-void uniphier_smp_setup(void);
-void uniphier_secondary_startup(void);
-
-void uniphier_smp_kick_all_cpus(void)
-{
- void __iomem *rom_boot_rsv0;
-
- rom_boot_rsv0 = ioremap(UNIPHIER_SMPCTRL_ROM_RSV0, SZ_8);
-
- writeq((u64)uniphier_secondary_startup, rom_boot_rsv0);
-
- iounmap(rom_boot_rsv0);
-
- uniphier_smp_setup();
-
- asm("dsb ishst\n" /* Ensure the write to ROM_RSV0 is visible */
- "sev"); /* Bring up all secondary CPUs from Boot ROM into U-Boot */
-}
diff --git a/arch/arm/mach-uniphier/arm64/timer.c b/arch/arm/mach-uniphier/arm64/timer.c
deleted file mode 100644
index c10903a..0000000
--- a/arch/arm/mach-uniphier/arm64/timer.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#define CNT_CONTROL_BASE 0x60E00000
-
-#define CNTCR 0x000
-#define CNTCR_EN BIT(0)
-
-/* setup ARMv8 Generic Timer */
-int timer_init(void)
-{
- void __iomem *base;
- u32 tmp;
-
- base = ioremap(CNT_CONTROL_BASE, SZ_4K);
-
- /*
- * Note:
- * In a system that implements both Secure and Non-secure states,
- * this register is only writable in Secure state.
- */
- tmp = readl(base + CNTCR);
- tmp |= CNTCR_EN;
- writel(tmp, base + CNTCR);
-
- iounmap(base);
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index ca910f6..884bc67 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -73,9 +73,6 @@
writel(0x0000b500, 0x6184e024);
writel(0x00000001, 0x6184e000);
}
-#ifdef CONFIG_ARMV8_MULTIENTRY
- cci500_init(2);
-#endif
}
#endif
@@ -230,12 +227,6 @@
support_card_late_init();
- led_puts("U6");
-
-#ifdef CONFIG_ARMV8_MULTIENTRY
- uniphier_smp_kick_all_cpus();
-#endif
-
led_puts("Uboo");
return 0;
diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c
index e3b9335..78de256 100644
--- a/arch/arm/mach-uniphier/boards.c
+++ b/arch/arm/mach-uniphier/boards.c
@@ -140,69 +140,6 @@
};
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-static const struct uniphier_board_data uniphier_ld11_data = {
- .dram_freq = 1600,
- .dram_ch[0] = {
- .size = 0x20000000,
- .width = 16,
- },
- .dram_ch[1] = {
- .size = 0x20000000,
- .width = 16,
- },
-};
-#endif
-
-#if defined(CONFIG_ARCH_UNIPHIER_LD20)
-static const struct uniphier_board_data uniphier_ld20_ref_data = {
- .dram_freq = 1866,
- .dram_ch[0] = {
- .size = 0x40000000,
- .width = 32,
- },
- .dram_ch[1] = {
- .size = 0x40000000,
- .width = 32,
- },
- .dram_ch[2] = {
- .size = 0x40000000,
- .width = 32,
- },
- .flags = UNIPHIER_BD_BOARD_LD20_REF,
-};
-
-static const struct uniphier_board_data uniphier_ld20_data = {
- .dram_freq = 1866,
- .dram_ch[0] = {
- .size = 0x40000000,
- .width = 32,
- },
- .dram_ch[1] = {
- .size = 0x40000000,
- .width = 32,
- },
- .dram_ch[2] = {
- .size = 0x40000000,
- .width = 32,
- },
- .flags = UNIPHIER_BD_BOARD_LD20_GLOBAL,
-};
-
-static const struct uniphier_board_data uniphier_ld21_data = {
- .dram_freq = 1866,
- .dram_ch[0] = {
- .size = 0x20000000,
- .width = 32,
- },
- .dram_ch[1] = {
- .size = 0x40000000,
- .width = 32,
- },
- .flags = UNIPHIER_BD_DRAM_SPARSE | UNIPHIER_BD_BOARD_LD21_GLOBAL,
-};
-#endif
-
struct uniphier_board_id {
const char *compatible;
const struct uniphier_board_data *param;
@@ -232,14 +169,6 @@
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
{ "socionext,uniphier-ld6b", &uniphier_ld6b_data, },
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
- { "socionext,uniphier-ld11", &uniphier_ld11_data, },
-#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD20)
- { "socionext,uniphier-ld21", &uniphier_ld21_data, },
- { "socionext,uniphier-ld20-ref", &uniphier_ld20_ref_data, },
- { "socionext,uniphier-ld20", &uniphier_ld20_data, },
-#endif
};
const struct uniphier_board_data *uniphier_get_board_param(void)
diff --git a/arch/arm/mach-uniphier/boot-device/Makefile b/arch/arm/mach-uniphier/boot-device/Makefile
index abb58a7..b357292 100644
--- a/arch/arm/mach-uniphier/boot-device/Makefile
+++ b/arch/arm/mach-uniphier/boot-device/Makefile
@@ -14,7 +14,3 @@
obj-$(CONFIG_ARCH_UNIPHIER_LD11) += boot-device-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += boot-device-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += boot-device-pxs3.o
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_BOARD_LOAD_IMAGE) += spl_board.o
-endif
diff --git a/arch/arm/mach-uniphier/boot-device/spl_board.c b/arch/arm/mach-uniphier/boot-device/spl_board.c
deleted file mode 100644
index bd47ac8..0000000
--- a/arch/arm/mach-uniphier/boot-device/spl_board.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 2017 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spl.h>
-#include <linux/bitops.h>
-#include <linux/compat.h>
-#include <linux/io.h>
-#include <asm/processor.h>
-
-#include "../soc-info.h"
-
-#define MMC_CMD_SWITCH 6
-#define MMC_CMD_SELECT_CARD 7
-#define MMC_CMD_SEND_CSD 9
-#define MMC_CMD_READ_MULTIPLE_BLOCK 18
-
-#define EXT_CSD_PART_CONF 179 /* R/W */
-
-#define MMC_RSP_PRESENT BIT(0)
-#define MMC_RSP_136 BIT(1) /* 136 bit response */
-#define MMC_RSP_CRC BIT(2) /* expect valid crc */
-#define MMC_RSP_BUSY BIT(3) /* card may send busy */
-#define MMC_RSP_OPCODE BIT(4) /* response contains opcode */
-
-#define MMC_RSP_NONE (0)
-#define MMC_RSP_R1 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
-#define MMC_RSP_R1b (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | \
- MMC_RSP_BUSY)
-#define MMC_RSP_R2 (MMC_RSP_PRESENT | MMC_RSP_136 | MMC_RSP_CRC)
-#define MMC_RSP_R3 (MMC_RSP_PRESENT)
-#define MMC_RSP_R4 (MMC_RSP_PRESENT)
-#define MMC_RSP_R5 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
-#define MMC_RSP_R6 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
-#define MMC_RSP_R7 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE)
-
-#define SDHCI_DMA_ADDRESS 0x00
-#define SDHCI_BLOCK_SIZE 0x04
-#define SDHCI_MAKE_BLKSZ(dma, blksz) ((((dma) & 0x7) << 12) | ((blksz) & 0xFFF))
-#define SDHCI_BLOCK_COUNT 0x06
-#define SDHCI_ARGUMENT 0x08
-#define SDHCI_TRANSFER_MODE 0x0C
-#define SDHCI_TRNS_DMA BIT(0)
-#define SDHCI_TRNS_BLK_CNT_EN BIT(1)
-#define SDHCI_TRNS_ACMD12 BIT(2)
-#define SDHCI_TRNS_READ BIT(4)
-#define SDHCI_TRNS_MULTI BIT(5)
-#define SDHCI_COMMAND 0x0E
-#define SDHCI_CMD_RESP_MASK 0x03
-#define SDHCI_CMD_CRC 0x08
-#define SDHCI_CMD_INDEX 0x10
-#define SDHCI_CMD_DATA 0x20
-#define SDHCI_CMD_ABORTCMD 0xC0
-#define SDHCI_CMD_RESP_NONE 0x00
-#define SDHCI_CMD_RESP_LONG 0x01
-#define SDHCI_CMD_RESP_SHORT 0x02
-#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
-#define SDHCI_MAKE_CMD(c, f) ((((c) & 0xff) << 8) | ((f) & 0xff))
-#define SDHCI_RESPONSE 0x10
-#define SDHCI_HOST_CONTROL 0x28
-#define SDHCI_CTRL_DMA_MASK 0x18
-#define SDHCI_CTRL_SDMA 0x00
-#define SDHCI_BLOCK_GAP_CONTROL 0x2A
-#define SDHCI_SOFTWARE_RESET 0x2F
-#define SDHCI_RESET_CMD 0x02
-#define SDHCI_RESET_DATA 0x04
-#define SDHCI_INT_STATUS 0x30
-#define SDHCI_INT_RESPONSE BIT(0)
-#define SDHCI_INT_DATA_END BIT(1)
-#define SDHCI_INT_ERROR BIT(15)
-#define SDHCI_SIGNAL_ENABLE 0x38
-
-/* RCA assigned by Boot ROM */
-#define UNIPHIER_EMMC_RCA 0x1000
-
-struct uniphier_mmc_cmd {
- unsigned int cmdidx;
- unsigned int resp_type;
- unsigned int cmdarg;
- unsigned int is_data;
-};
-
-static int uniphier_emmc_send_cmd(void __iomem *host_base,
- struct uniphier_mmc_cmd *cmd)
-{
- u32 mode = 0;
- u32 mask = SDHCI_INT_RESPONSE;
- u32 stat, flags;
-
- writel(U32_MAX, host_base + SDHCI_INT_STATUS);
- writel(0, host_base + SDHCI_SIGNAL_ENABLE);
- writel(cmd->cmdarg, host_base + SDHCI_ARGUMENT);
-
- if (cmd->is_data)
- mode = SDHCI_TRNS_DMA | SDHCI_TRNS_BLK_CNT_EN |
- SDHCI_TRNS_ACMD12 | SDHCI_TRNS_READ |
- SDHCI_TRNS_MULTI;
-
- writew(mode, host_base + SDHCI_TRANSFER_MODE);
-
- if (!(cmd->resp_type & MMC_RSP_PRESENT))
- flags = SDHCI_CMD_RESP_NONE;
- else if (cmd->resp_type & MMC_RSP_136)
- flags = SDHCI_CMD_RESP_LONG;
- else if (cmd->resp_type & MMC_RSP_BUSY)
- flags = SDHCI_CMD_RESP_SHORT_BUSY;
- else
- flags = SDHCI_CMD_RESP_SHORT;
-
- if (cmd->resp_type & MMC_RSP_CRC)
- flags |= SDHCI_CMD_CRC;
- if (cmd->resp_type & MMC_RSP_OPCODE)
- flags |= SDHCI_CMD_INDEX;
- if (cmd->is_data)
- flags |= SDHCI_CMD_DATA;
-
- if (cmd->resp_type & MMC_RSP_BUSY || cmd->is_data)
- mask |= SDHCI_INT_DATA_END;
-
- writew(SDHCI_MAKE_CMD(cmd->cmdidx, flags), host_base + SDHCI_COMMAND);
-
- do {
- stat = readl(host_base + SDHCI_INT_STATUS);
- if (stat & SDHCI_INT_ERROR)
- return -EIO;
-
- } while ((stat & mask) != mask);
-
- return 0;
-}
-
-static int uniphier_emmc_switch_part(void __iomem *host_base, int part_num)
-{
- struct uniphier_mmc_cmd cmd = {};
-
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
- cmd.cmdarg = (EXT_CSD_PART_CONF << 16) | (part_num << 8) | (3 << 24);
-
- return uniphier_emmc_send_cmd(host_base, &cmd);
-}
-
-static int uniphier_emmc_is_over_2gb(void __iomem *host_base)
-{
- struct uniphier_mmc_cmd cmd = {};
- u32 csd40, csd72; /* CSD[71:40], CSD[103:72] */
- int ret;
-
- cmd.cmdidx = MMC_CMD_SEND_CSD;
- cmd.resp_type = MMC_RSP_R2;
- cmd.cmdarg = UNIPHIER_EMMC_RCA << 16;
-
- ret = uniphier_emmc_send_cmd(host_base, &cmd);
- if (ret)
- return ret;
-
- csd40 = readl(host_base + SDHCI_RESPONSE + 4);
- csd72 = readl(host_base + SDHCI_RESPONSE + 8);
-
- return !(~csd40 & 0xffc00380) && !(~csd72 & 0x3);
-}
-
-static int uniphier_emmc_load_image(void __iomem *host_base, u32 dev_addr,
- unsigned long load_addr, u32 block_cnt)
-{
- struct uniphier_mmc_cmd cmd = {};
- u8 tmp;
-
- WARN_ON(load_addr >> 32);
-
- writel(load_addr, host_base + SDHCI_DMA_ADDRESS);
- writew(SDHCI_MAKE_BLKSZ(7, 512), host_base + SDHCI_BLOCK_SIZE);
- writew(block_cnt, host_base + SDHCI_BLOCK_COUNT);
-
- tmp = readb(host_base + SDHCI_HOST_CONTROL);
- tmp &= ~SDHCI_CTRL_DMA_MASK;
- tmp |= SDHCI_CTRL_SDMA;
- writeb(tmp, host_base + SDHCI_HOST_CONTROL);
-
- tmp = readb(host_base + SDHCI_BLOCK_GAP_CONTROL);
- tmp &= ~1; /* clear Stop At Block Gap Request */
- writeb(tmp, host_base + SDHCI_BLOCK_GAP_CONTROL);
-
- cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
- cmd.resp_type = MMC_RSP_R1;
- cmd.cmdarg = dev_addr;
- cmd.is_data = 1;
-
- return uniphier_emmc_send_cmd(host_base, &cmd);
-}
-
-static int spl_board_load_image(struct spl_image_info *spl_image,
- struct spl_boot_device *bootdev)
-{
- u32 dev_addr = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
- void __iomem *host_base = (void __iomem *)0x5a000200;
- struct uniphier_mmc_cmd cmd = {};
- int ret;
-
- /*
- * deselect card before SEND_CSD command.
- * Do not check the return code. It fails, but it is OK.
- */
- cmd.cmdidx = MMC_CMD_SELECT_CARD;
- cmd.resp_type = MMC_RSP_R1;
-
- uniphier_emmc_send_cmd(host_base, &cmd); /* CMD7 (arg=0) */
-
- /* reset CMD Line */
- writeb(SDHCI_RESET_CMD | SDHCI_RESET_DATA,
- host_base + SDHCI_SOFTWARE_RESET);
- while (readb(host_base + SDHCI_SOFTWARE_RESET))
- cpu_relax();
-
- ret = uniphier_emmc_is_over_2gb(host_base);
- if (ret < 0)
- return ret;
- if (ret) {
- debug("card is block addressing\n");
- } else {
- debug("card is byte addressing\n");
- dev_addr *= 512;
- }
-
- cmd.cmdarg = UNIPHIER_EMMC_RCA << 16;
-
- /* select card again */
- ret = uniphier_emmc_send_cmd(host_base, &cmd);
- if (ret)
- printf("failed to select card\n");
-
- /* Switch to Boot Partition 1 */
- ret = uniphier_emmc_switch_part(host_base, 1);
- if (ret)
- printf("failed to switch partition\n");
-
- ret = uniphier_emmc_load_image(host_base, dev_addr,
- CONFIG_SYS_TEXT_BASE, 1);
- if (ret) {
- printf("failed to load image\n");
- return ret;
- }
-
- ret = spl_parse_image_header(spl_image, (void *)CONFIG_SYS_TEXT_BASE);
- if (ret)
- return ret;
-
- ret = uniphier_emmc_load_image(host_base, dev_addr,
- spl_image->load_addr,
- spl_image->size / 512);
- if (ret) {
- printf("failed to load image\n");
- return ret;
- }
-
- return 0;
-}
-SPL_LOAD_IMAGE_METHOD("eMMC", 0, BOOT_DEVICE_BOARD, spl_board_load_image);
diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile
index dad035d..1680ddd 100644
--- a/arch/arm/mach-uniphier/clk/Makefile
+++ b/arch/arm/mach-uniphier/clk/Makefile
@@ -11,8 +11,6 @@
obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-early-sld3.o clk-dram-pro5.o dpll-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-early-sld3.o clk-dram-pxs2.o dpll-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-early-sld3.o clk-dram-pxs2.o dpll-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-early-ld11.o clk-dram-ld11.o dpll-ld11.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-early-ld11.o clk-dram-ld20.o dpll-ld20.o
else
diff --git a/arch/arm/mach-uniphier/clk/clk-dram-ld11.c b/arch/arm/mach-uniphier/clk/clk-dram-ld11.c
deleted file mode 100644
index 593e11a..0000000
--- a/arch/arm/mach-uniphier/clk/clk-dram-ld11.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sc64-regs.h"
-
-void uniphier_ld11_dram_clk_init(void)
-{
- u32 tmp;
-
- /* deassert reset */
- tmp = readl(SC_RSTCTRL7);
- tmp |= SC_RSTCTRL7_UMC31 | SC_RSTCTRL7_UMC30;
- writel(tmp, SC_RSTCTRL7);
-
- /* provide clocks */
- tmp = readl(SC_CLKCTRL7);
- tmp |= SC_CLKCTRL7_UMC31 | SC_CLKCTRL7_UMC30;
- writel(tmp, SC_CLKCTRL7);
-}
diff --git a/arch/arm/mach-uniphier/clk/clk-dram-ld20.c b/arch/arm/mach-uniphier/clk/clk-dram-ld20.c
deleted file mode 100644
index 62e5acd..0000000
--- a/arch/arm/mach-uniphier/clk/clk-dram-ld20.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sc64-regs.h"
-
-void uniphier_ld20_dram_clk_init(void)
-{
- u32 tmp;
-
- /* deassert reset */
- tmp = readl(SC_RSTCTRL7);
- tmp |= SC_RSTCTRL7_UMCSB | SC_RSTCTRL7_UMCA2 | SC_RSTCTRL7_UMCA1 |
- SC_RSTCTRL7_UMCA0 | SC_RSTCTRL7_UMC32 | SC_RSTCTRL7_UMC31 |
- SC_RSTCTRL7_UMC30;
- writel(tmp, SC_RSTCTRL7);
-
- /* provide clocks */
- tmp = readl(SC_CLKCTRL7);
- tmp |= SC_CLKCTRL7_UMCSB | SC_CLKCTRL7_UMC32 | SC_CLKCTRL7_UMC31 |
- SC_CLKCTRL7_UMC30;
- writel(tmp, SC_CLKCTRL7);
-}
diff --git a/arch/arm/mach-uniphier/clk/clk-early-ld11.c b/arch/arm/mach-uniphier/clk/clk-early-ld11.c
deleted file mode 100644
index bb6f7a4..0000000
--- a/arch/arm/mach-uniphier/clk/clk-early-ld11.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sc64-regs.h"
-
-void uniphier_ld11_early_clk_init(void)
-{
- u32 tmp;
-
- /* provide clocks */
- tmp = readl(SC_CLKCTRL4);
- tmp |= SC_CLKCTRL4_PERI;
- writel(tmp, SC_CLKCTRL4);
-}
diff --git a/arch/arm/mach-uniphier/clk/dpll-ld11.c b/arch/arm/mach-uniphier/clk/dpll-ld11.c
deleted file mode 100644
index 7f0677c..0000000
--- a/arch/arm/mach-uniphier/clk/dpll-ld11.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include "../init.h"
-#include "../sc64-regs.h"
-#include "pll.h"
-
-int uniphier_ld11_dpll_init(const struct uniphier_board_data *bd)
-{
- uniphier_ld20_sscpll_init(SC_DPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/clk/dpll-ld20.c b/arch/arm/mach-uniphier/clk/dpll-ld20.c
deleted file mode 100644
index 86e99c4..0000000
--- a/arch/arm/mach-uniphier/clk/dpll-ld20.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include "../init.h"
-#include "../sc64-regs.h"
-#include "pll.h"
-
-int uniphier_ld20_dpll_init(const struct uniphier_board_data *bd)
-{
- uniphier_ld20_sscpll_init(SC_DPLL0CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
- uniphier_ld20_sscpll_init(SC_DPLL1CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
- uniphier_ld20_sscpll_init(SC_DPLL2CTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/cpu-info.c b/arch/arm/mach-uniphier/cpu-info.c
index 94dce7c..2ce73c5 100644
--- a/arch/arm/mach-uniphier/cpu-info.c
+++ b/arch/arm/mach-uniphier/cpu-info.c
@@ -20,37 +20,37 @@
model = uniphier_get_soc_model();
rev = uniphier_get_soc_revision();
- puts("CPU: ");
+ puts("SoC: ");
switch (id) {
case UNIPHIER_SLD3_ID:
- puts("sLD3 (MN2WS0220)");
+ puts("sLD3");
required_model = 2;
break;
case UNIPHIER_LD4_ID:
- puts("LD4 (MN2WS0250)");
+ puts("LD4");
required_rev = 2;
break;
case UNIPHIER_PRO4_ID:
- puts("Pro4 (MN2WS0230)");
+ puts("Pro4");
break;
case UNIPHIER_SLD8_ID:
- puts("sLD8 (MN2WS0270)");
+ puts("sLD8");
break;
case UNIPHIER_PRO5_ID:
- puts("Pro5 (MN2WS0300)");
+ puts("Pro5");
break;
case UNIPHIER_PXS2_ID:
- puts("PXs2 (MN2WS0310)");
+ puts("PXs2");
break;
case UNIPHIER_LD6B_ID:
- puts("LD6b (MN2WS0320)");
+ puts("LD6b");
break;
case UNIPHIER_LD11_ID:
- puts("LD11 (SC1405AP1)");
+ puts("LD11");
break;
case UNIPHIER_LD20_ID:
- puts("LD20 (SC1401AJ1)");
+ puts("LD20");
break;
case UNIPHIER_PXS3_ID:
puts("PXs3");
@@ -60,7 +60,7 @@
return -ENOTSUPP;
}
- printf(" model %d (revision %d)\n", model, rev);
+ printf(" (model %d, revision %d)\n", model, rev);
if (model < required_model) {
printf("Only model %d or newer is supported.\n",
diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile
index 2ce6199..1da33f6 100644
--- a/arch/arm/mach-uniphier/dram/Makefile
+++ b/arch/arm/mach-uniphier/dram/Makefile
@@ -14,8 +14,6 @@
obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += umc-pro5.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += umc-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += umc-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD11) += umc-ld11.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20) += umc-ld20.o
else
diff --git a/arch/arm/mach-uniphier/dram/ddruqphy-regs.h b/arch/arm/mach-uniphier/dram/ddruqphy-regs.h
deleted file mode 100644
index e496af5..0000000
--- a/arch/arm/mach-uniphier/dram/ddruqphy-regs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _DDRUQPHY_REGS_H
-#define _DDRUQPHY_REGS_H
-
-#include <linux/bitops.h>
-
-#define PHY_REG_SHIFT 2
-#define PHY_SLV_DLY_WIDTH 6
-#define PHY_BITLVL_DLY_WIDTH 6
-#define PHY_MAS_DLY_WIDTH 8
-
-#define PHY_SCL_START (0x40 << (PHY_REG_SHIFT))
-#define PHY_SCL_START_GO_DONE BIT(28)
-#define PHY_SCL_DATA_0 (0x41 << (PHY_REG_SHIFT))
-#define PHY_SCL_DATA_1 (0x42 << (PHY_REG_SHIFT))
-#define PHY_SCL_LATENCY (0x43 << (PHY_REG_SHIFT))
-#define PHY_SCL_CONFIG_1 (0x46 << (PHY_REG_SHIFT))
-#define PHY_SCL_CONFIG_2 (0x47 << (PHY_REG_SHIFT))
-#define PHY_PAD_CTRL (0x48 << (PHY_REG_SHIFT))
-#define PHY_DLL_RECALIB (0x49 << (PHY_REG_SHIFT))
-#define PHY_DLL_RECALIB_TRIM_MASK GENMASK(PHY_SLV_DLY_WIDTH - 1, 0)
-#define PHY_DLL_RECALIB_INCR BIT(27)
-#define PHY_DLL_ADRCTRL (0x4A << (PHY_REG_SHIFT))
-#define PHY_DLL_ADRCTRL_TRIM_MASK GENMASK(PHY_SLV_DLY_WIDTH - 1, 0)
-#define PHY_DLL_ADRCTRL_INCR BIT(9)
-#define PHY_DLL_ADRCTRL_MDL_SHIFT 24
-#define PHY_DLL_ADRCTRL_MDL_MASK (GENMASK(PHY_MAS_DLY_WIDTH - 1, 0) << \
- PHY_DLL_ADRCTRL_MDL_SHIFT)
-#define PHY_LANE_SEL (0x4B << (PHY_REG_SHIFT))
-#define PHY_LANE_SEL_LANE_SHIFT 0
-#define PHY_LANE_SEL_LANE_WIDTH 8
-#define PHY_LANE_SEL_BIT_SHIFT 8
-#define PHY_LANE_SEL_BIT_WIDTH 4
-#define PHY_DLL_TRIM_1 (0x4C << (PHY_REG_SHIFT))
-#define PHY_DLL_TRIM_2 (0x4D << (PHY_REG_SHIFT))
-#define PHY_DLL_TRIM_3 (0x4E << (PHY_REG_SHIFT))
-#define PHY_SCL_MAIN_CLK_DELTA (0x50 << (PHY_REG_SHIFT))
-#define PHY_WRLVL_AUTOINC_TRIM (0x53 << (PHY_REG_SHIFT))
-#define PHY_WRLVL_DYN_ODT (0x54 << (PHY_REG_SHIFT))
-#define PHY_WRLVL_ON_OFF (0x55 << (PHY_REG_SHIFT))
-#define PHY_UNQ_ANALOG_DLL_1 (0x57 << (PHY_REG_SHIFT))
-#define PHY_UNQ_ANALOG_DLL_2 (0x58 << (PHY_REG_SHIFT))
-#define PHY_DLL_INCR_TRIM_1 (0x59 << (PHY_REG_SHIFT))
-#define PHY_DLL_INCR_TRIM_3 (0x5A << (PHY_REG_SHIFT))
-#define PHY_SCL_CONFIG_3 (0x5B << (PHY_REG_SHIFT))
-#define PHY_UNIQUIFY_TSMC_IO_1 (0x5C << (PHY_REG_SHIFT))
-#define PHY_SCL_START_ADDR (0x62 << (PHY_REG_SHIFT))
-#define PHY_IP_DQ_DQS_BITWISE_TRIM (0x65 << (PHY_REG_SHIFT))
-#define PHY_IP_DQ_DQS_BITWISE_TRIM_MASK \
- GENMASK(PHY_BITLVL_DLY_WIDTH - 1, 0)
-#define PHY_IP_DQ_DQS_BITWISE_TRIM_INC \
- BIT(PHY_BITLVL_DLY_WIDTH)
-#define PHY_IP_DQ_DQS_BITWISE_TRIM_OVERRIDE \
- BIT(PHY_BITLVL_DLY_WIDTH + 1)
-#define PHY_DSCL_CNT (0x67 << (PHY_REG_SHIFT))
-#define PHY_OP_DQ_DM_DQS_BITWISE_TRIM (0x68 << (PHY_REG_SHIFT))
-#define PHY_OP_DQ_DM_DQS_BITWISE_TRIM_MASK \
- GENMASK(PHY_BITLVL_DLY_WIDTH - 1, 0)
-#define PHY_OP_DQ_DM_DQS_BITWISE_TRIM_INC \
- BIT(PHY_BITLVL_DLY_WIDTH)
-#define PHY_OP_DQ_DM_DQS_BITWISE_TRIM_OVERRIDE \
- BIT(PHY_BITLVL_DLY_WIDTH + 1)
-#define PHY_DLL_TRIM_CLK (0x69 << (PHY_REG_SHIFT))
-#define PHY_DLL_TRIM_CLK_MASK GENMASK(PHY_SLV_DLY_WIDTH, 0)
-#define PHY_DLL_TRIM_CLK_INCR BIT(PHY_SLV_DLY_WIDTH + 1)
-#define PHY_DYNAMIC_BIT_LVL (0x6B << (PHY_REG_SHIFT))
-#define PHY_SCL_WINDOW_TRIM (0x6D << (PHY_REG_SHIFT))
-#define PHY_DISABLE_GATING_FOR_SCL (0x6E << (PHY_REG_SHIFT))
-#define PHY_SCL_CONFIG_4 (0x6F << (PHY_REG_SHIFT))
-#define PHY_DYNAMIC_WRITE_BIT_LVL (0x70 << (PHY_REG_SHIFT))
-#define PHY_VREF_TRAINING (0x72 << (PHY_REG_SHIFT))
-#define PHY_SCL_GATE_TIMING (0x78 << (PHY_REG_SHIFT))
-
-#endif /* _DDRUQPHY_REGS_H */
diff --git a/arch/arm/mach-uniphier/dram/umc-ld11.c b/arch/arm/mach-uniphier/dram/umc-ld11.c
deleted file mode 100644
index 9e2021a..0000000
--- a/arch/arm/mach-uniphier/dram/umc-ld11.c
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <asm/processor.h>
-
-#include "../init.h"
-#include "ddrphy-regs.h"
-#include "umc64-regs.h"
-
-#define DDR_FREQ 1600
-
-#define DRAM_CH_NR 2
-#define RANK_BLOCKS_TR 2
-
-enum dram_freq {
- DRAM_FREQ_1600M,
- DRAM_FREQ_NR,
-};
-
-enum dram_size {
- DRAM_SZ_256M,
- DRAM_SZ_512M,
- DRAM_SZ_NR,
-};
-
-/* PHY */
-static const int rof_pos_shift_pre[RANK_BLOCKS_TR][2] = { {0, 0}, {0, 0} };
-static const int rof_neg_shift_pre[RANK_BLOCKS_TR][2] = { {0, 0}, {0, 0} };
-static const int rof_pos_shift[RANK_BLOCKS_TR][2] = { {-35, -35}, {-35, -35} };
-static const int rof_neg_shift[RANK_BLOCKS_TR][2] = { {-17, -17}, {-17, -17} };
-static const int tof_shift[RANK_BLOCKS_TR][2] = { {-50, -50}, {-50, -50} };
-
-/* Register address */
-#define PHY_ZQ0CR1 0x00000184
-#define PHY_ZQ1CR1 0x00000194
-#define PHY_ZQ2CR1 0x000001A4
-#define PHY_DX0GCR 0x000001C0
-#define PHY_DX0GTR 0x000001F0
-#define PHY_DX1GCR 0x00000200
-#define PHY_DX1GTR 0x00000230
-#define PHY_DX2GCR 0x00000240
-#define PHY_DX2GTR 0x00000270
-#define PHY_DX3GCR 0x00000280
-#define PHY_DX3GTR 0x000002B0
-
-#define PHY_DXMDLR(dx) (0x000001EC + 0x40 * (dx))
-#define PHY_DXLCDLR0(dx) (0x000001E0 + 0x40 * (dx))
-#define PHY_DXLCDLR1(dx) (0x000001E4 + 0x40 * (dx))
-#define PHY_DXLCDLR2(dx) (0x000001E8 + 0x40 * (dx))
-#define PHY_DXBDLR1(dx) (0x000001D0 + 0x40 * (dx))
-#define PHY_DXBDLR2(dx) (0x000001D4 + 0x40 * (dx))
-
-/* MASK */
-#define PHY_ACBD_MASK 0x00FC0000
-#define PHY_CK0BD_MASK 0x0000003F
-#define PHY_CK1BD_MASK 0x00000FC0
-#define PHY_IPRD_MASK 0x000000FF
-#define PHY_WLD_MASK(rank) (0xFF << (8 * (rank)))
-#define PHY_DQSGD_MASK(rank) (0xFF << (8 * (rank)))
-#define PHY_DQSGX_MASK BIT(6)
-#define PHY_DSWBD_MASK 0x3F000000 /* bit[29:24] */
-#define PHY_DSDQOE_MASK 0x00000FFF
-
-static void ddrphy_maskwritel(u32 data, u32 mask, void __iomem *addr)
-{
- u32 value;
-
- value = (readl(addr) & ~(mask)) | (data & mask);
- writel(value, addr);
-}
-
-static u32 ddrphy_maskreadl(u32 mask, void __iomem *addr)
-{
- return readl(addr) & mask;
-}
-
-/* step of 0.5T for PUB-byte */
-static u8 ddrphy_get_mdl(int dx, void __iomem *phy_base)
-{
- return ddrphy_maskreadl(PHY_IPRD_MASK, phy_base + PHY_DXMDLR(dx));
-}
-
-/* Calculating step for PUB-byte */
-static int ddrphy_hpstep(int delay, int dx, void __iomem *phy_base)
-{
- return delay * ddrphy_get_mdl(dx, phy_base) * DDR_FREQ / 1000000;
-}
-
-static void ddrphy_vt_ctrl(void __iomem *phy_base, int enable)
-{
- u32 tmp;
-
- tmp = readl(phy_base + PHY_PGCR1);
-
- if (enable)
- tmp &= ~PHY_PGCR1_INHVT;
- else
- tmp |= PHY_PGCR1_INHVT;
-
- writel(tmp, phy_base + PHY_PGCR1);
-
- if (!enable) {
- while (!(readl(phy_base + PHY_PGSR1) & PHY_PGSR1_VTSTOP))
- cpu_relax();
- }
-}
-
-static void ddrphy_set_ckoffset_qoffset(int delay_ckoffset0, int delay_ckoffset1,
- int delay_qoffset, int enable,
- void __iomem *phy_base)
-{
- u8 ck_step0, ck_step1; /* ckoffset_step for clock */
- u8 q_step; /* qoffset_step for clock */
- int dx;
-
- dx = 2; /* use dx2 in sLD11 */
-
- ck_step0 = ddrphy_hpstep(delay_ckoffset0, dx, phy_base); /* CK-Offset */
- ck_step1 = ddrphy_hpstep(delay_ckoffset1, dx, phy_base); /* CK-Offset */
- q_step = ddrphy_hpstep(delay_qoffset, dx, phy_base); /* Q-Offset */
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- /* Q->[23:18], CK1->[11:6], CK0->bit[5:0] */
- if (enable == 1)
- ddrphy_maskwritel((q_step << 18) + (ck_step1 << 6) + ck_step0,
- PHY_ACBD_MASK | PHY_CK1BD_MASK | PHY_CK0BD_MASK,
- phy_base + PHY_ACBDLR);
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_set_wl_delay_dx(int dx, int r0_delay, int r1_delay,
- int enable, void __iomem *phy_base)
-{
- int rank;
- int delay_wl[4];
- u32 wl_mask = 0; /* WriteLeveling's Mask */
- u32 wl_value = 0; /* WriteLeveling's Value */
-
- delay_wl[0] = r0_delay & 0xfff;
- delay_wl[1] = r1_delay & 0xfff;
- delay_wl[2] = 0;
- delay_wl[3] = 0;
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- for (rank = 0; rank < 4; rank++) {
- wl_mask |= PHY_WLD_MASK(rank);
- /* WriteLeveling's delay */
- wl_value |= ddrphy_hpstep(delay_wl[rank], dx, phy_base) << (8 * rank);
- }
-
- if (enable == 1)
- ddrphy_maskwritel(wl_value, wl_mask, phy_base + PHY_DXLCDLR0(dx));
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_set_dqsg_delay_dx(int dx, int r0_delay, int r1_delay,
- int enable, void __iomem *phy_base)
-{
- int rank;
- int delay_dqsg[4];
- u32 dqsg_mask = 0; /* DQSGating_LCDL_delay's Mask */
- u32 dqsg_value = 0; /* DQSGating_LCDL_delay's Value */
-
- delay_dqsg[0] = r0_delay;
- delay_dqsg[1] = r1_delay;
- delay_dqsg[2] = 0;
- delay_dqsg[3] = 0;
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- for (rank = 0; rank < 4; rank++) {
- dqsg_mask |= PHY_DQSGD_MASK(rank);
- /* DQSGating's delay */
- dqsg_value |= ddrphy_hpstep(delay_dqsg[rank], dx, phy_base) << (8 * rank);
- }
-
- if (enable == 1)
- ddrphy_maskwritel(dqsg_value, dqsg_mask, phy_base + PHY_DXLCDLR2(dx));
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_set_dswb_delay_dx(int dx, int delay, int enable, void __iomem *phy_base)
-{
- u8 dswb_step;
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- dswb_step = ddrphy_hpstep(delay, dx, phy_base); /* DQS-BDL's delay */
-
- if (enable == 1)
- ddrphy_maskwritel(dswb_step << 24, PHY_DSWBD_MASK, phy_base + PHY_DXBDLR1(dx));
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_set_oe_delay_dx(int dx, int dqs_delay, int dq_delay,
- int enable, void __iomem *phy_base)
-{
- u8 dqs_oe_step, dq_oe_step;
- u32 wdata;
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- /* OE(DQS,DQ) */
- dqs_oe_step = ddrphy_hpstep(dqs_delay, dx, phy_base); /* DQS-oe's delay */
- dq_oe_step = ddrphy_hpstep(dq_delay, dx, phy_base); /* DQ-oe's delay */
- wdata = ((dq_oe_step<<6) + dqs_oe_step) & 0xFFF;
-
- if (enable == 1)
- ddrphy_maskwritel(wdata, PHY_DSDQOE_MASK, phy_base + PHY_DXBDLR2(dx));
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_ext_dqsgt(void __iomem *phy_base)
-{
- /* Extend DQSGating_window min:+1T max:+1T */
- ddrphy_maskwritel(PHY_DQSGX_MASK, PHY_DQSGX_MASK, phy_base + PHY_DSGCR);
-}
-
-static void ddrphy_shift_tof_hws(void __iomem *phy_base, const int shift[][2])
-{
- int dx, block, byte;
- u32 lcdlr1, wdqd;
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- for (block = 0; block < RANK_BLOCKS_TR; block++) {
- for (byte = 0; byte < 2; byte++) {
- dx = block * 2 + byte;
- lcdlr1 = readl(phy_base + PHY_DXLCDLR1(dx));
- wdqd = lcdlr1 & 0xff;
- wdqd = clamp(wdqd + ddrphy_hpstep(shift[block][byte], dx, phy_base),
- 0U, 0xffU);
- lcdlr1 = (lcdlr1 & ~0xff) | wdqd;
- writel(lcdlr1, phy_base + PHY_DXLCDLR1(dx));
- readl(phy_base + PHY_DXLCDLR1(dx)); /* relax */
- }
- }
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_shift_rof_hws(void __iomem *phy_base, const int pos_shift[][2],
- const int neg_shift[][2])
-{
- int dx, block, byte;
- u32 lcdlr1, rdqsd, rdqnsd;
-
- ddrphy_vt_ctrl(phy_base, 0);
-
- for (block = 0; block < RANK_BLOCKS_TR; block++) {
- for (byte = 0; byte < 2; byte++) {
- dx = block * 2 + byte;
- lcdlr1 = readl(phy_base + PHY_DXLCDLR1(dx));
-
- /* DQS LCDL RDQNSD->[23:16] RDQSD->[15:8] */
- rdqsd = (lcdlr1 >> 8) & 0xff;
- rdqnsd = (lcdlr1 >> 16) & 0xff;
- rdqsd = clamp(rdqsd + ddrphy_hpstep(pos_shift[block][byte], dx, phy_base),
- 0U, 0xffU);
- rdqnsd = clamp(rdqnsd + ddrphy_hpstep(neg_shift[block][byte], dx, phy_base),
- 0U, 0xffU);
- lcdlr1 = (lcdlr1 & ~(0xffff << 8)) | (rdqsd << 8) | (rdqnsd << 16);
- writel(lcdlr1, phy_base + PHY_DXLCDLR1(dx));
- readl(phy_base + PHY_DXLCDLR1(dx)); /* relax */
- }
- }
-
- ddrphy_vt_ctrl(phy_base, 1);
-}
-
-static void ddrphy_boot_run_hws(void __iomem *phy_base)
-{
- /* Hard Training for DIO */
- writel(0x0000f401, phy_base + PHY_PIR);
- while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
- cpu_relax();
-}
-
-static void ddrphy_training(void __iomem *phy_base)
-{
- /* DIO roffset shift before hard training */
- ddrphy_shift_rof_hws(phy_base, rof_pos_shift_pre, rof_neg_shift_pre);
-
- /* Hard Training for each CH */
- ddrphy_boot_run_hws(phy_base);
-
- /* DIO toffset shift after training */
- ddrphy_shift_tof_hws(phy_base, tof_shift);
-
- /* DIO roffset shift after training */
- ddrphy_shift_rof_hws(phy_base, rof_pos_shift, rof_neg_shift);
-
- /* Extend DQSGating window min:+1T max:+1T */
- ddrphy_ext_dqsgt(phy_base);
-}
-
-static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq)
-{
- writel(0x40000000, phy_base + PHY_PIR);
- writel(0x0300C4F1, phy_base + PHY_PGCR1);
- writel(0x0C807D04, phy_base + PHY_PTR0);
- writel(0x27100578, phy_base + PHY_PTR1);
- writel(0x00083DEF, phy_base + PHY_PTR2);
- writel(0x12061A80, phy_base + PHY_PTR3);
- writel(0x08027100, phy_base + PHY_PTR4);
- writel(0x9D9CBB66, phy_base + PHY_DTPR0);
- writel(0x1a878400, phy_base + PHY_DTPR1);
- writel(0x50025200, phy_base + PHY_DTPR2);
- writel(0xF004641A, phy_base + PHY_DSGCR);
- writel(0x0000040B, phy_base + PHY_DCR);
- writel(0x00000d71, phy_base + PHY_MR0);
- writel(0x00000006, phy_base + PHY_MR1);
- writel(0x00000098, phy_base + PHY_MR2);
- writel(0x00000000, phy_base + PHY_MR3);
-
- while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
- cpu_relax();
-
- writel(0x00000059, phy_base + PHY_ZQ0CR1);
- writel(0x00000019, phy_base + PHY_ZQ1CR1);
- writel(0x00000019, phy_base + PHY_ZQ2CR1);
- writel(0x30FC6C20, phy_base + PHY_PGCR2);
-
- ddrphy_set_ckoffset_qoffset(119, 0, 0, 1, phy_base);
- ddrphy_set_wl_delay_dx(0, 220, 220, 1, phy_base);
- ddrphy_set_wl_delay_dx(1, 160, 160, 1, phy_base);
- ddrphy_set_wl_delay_dx(2, 190, 190, 1, phy_base);
- ddrphy_set_wl_delay_dx(3, 150, 150, 1, phy_base);
- ddrphy_set_dqsg_delay_dx(0, 750, 750, 1, phy_base);
- ddrphy_set_dqsg_delay_dx(1, 750, 750, 1, phy_base);
- ddrphy_set_dqsg_delay_dx(2, 750, 750, 1, phy_base);
- ddrphy_set_dqsg_delay_dx(3, 750, 750, 1, phy_base);
- ddrphy_set_dswb_delay_dx(0, 0, 1, phy_base);
- ddrphy_set_dswb_delay_dx(1, 0, 1, phy_base);
- ddrphy_set_dswb_delay_dx(2, 0, 1, phy_base);
- ddrphy_set_dswb_delay_dx(3, 0, 1, phy_base);
- ddrphy_set_oe_delay_dx(0, 0, 0, 1, phy_base);
- ddrphy_set_oe_delay_dx(1, 0, 0, 1, phy_base);
- ddrphy_set_oe_delay_dx(2, 0, 0, 1, phy_base);
- ddrphy_set_oe_delay_dx(3, 0, 0, 1, phy_base);
-
- writel(0x44000E81, phy_base + PHY_DX0GCR);
- writel(0x44000E81, phy_base + PHY_DX1GCR);
- writel(0x44000E81, phy_base + PHY_DX2GCR);
- writel(0x44000E81, phy_base + PHY_DX3GCR);
- writel(0x00055002, phy_base + PHY_DX0GTR);
- writel(0x00055002, phy_base + PHY_DX1GTR);
- writel(0x00055010, phy_base + PHY_DX2GTR);
- writel(0x00055010, phy_base + PHY_DX3GTR);
- writel(0x930035C7, phy_base + PHY_DTCR);
- writel(0x00000003, phy_base + PHY_PIR);
- readl(phy_base + PHY_PIR);
- while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
- cpu_relax();
-
- writel(0x00000181, phy_base + PHY_PIR);
- readl(phy_base + PHY_PIR);
- while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
- cpu_relax();
-
- writel(0x44181884, phy_base + PHY_DXCCR);
- writel(0x00000001, phy_base + PHY_GPR1);
-}
-
-/* UMC */
-static const u32 umc_cmdctla[DRAM_FREQ_NR] = {0x060B0B1C};
-static const u32 umc_cmdctlb[DRAM_FREQ_NR] = {0x27201806};
-static const u32 umc_cmdctlc[DRAM_FREQ_NR] = {0x00120B04};
-static const u32 umc_cmdctle[DRAM_FREQ_NR] = {0x00680607};
-static const u32 umc_cmdctlf[DRAM_FREQ_NR] = {0x02000200};
-static const u32 umc_cmdctlg[DRAM_FREQ_NR] = {0x08080808};
-
-static const u32 umc_rdatactl[DRAM_FREQ_NR] = {0x00000810};
-static const u32 umc_wdatactl[DRAM_FREQ_NR] = {0x00000004};
-static const u32 umc_odtctl[DRAM_FREQ_NR] = {0x02000002};
-static const u32 umc_acssetb[DRAM_CH_NR] = {0x00000200, 0x00000203};
-
-static const u32 umc_memconfch[DRAM_FREQ_NR] = {0x00023605};
-
-static int umc_dc_init(void __iomem *dc_base, enum dram_freq freq,
- unsigned long size, int ch)
-{
- /* Wait for PHY Init Complete */
- writel(umc_cmdctla[freq], dc_base + UMC_CMDCTLA);
- writel(umc_cmdctlb[freq], dc_base + UMC_CMDCTLB);
- writel(umc_cmdctlc[freq], dc_base + UMC_CMDCTLC);
- writel(umc_cmdctle[freq], dc_base + UMC_CMDCTLE);
- writel(umc_cmdctlf[freq], dc_base + UMC_CMDCTLF);
- writel(umc_cmdctlg[freq], dc_base + UMC_CMDCTLG);
-
- writel(umc_rdatactl[freq], dc_base + UMC_RDATACTL_D0);
- writel(umc_rdatactl[freq], dc_base + UMC_RDATACTL_D1);
-
- writel(umc_wdatactl[freq], dc_base + UMC_WDATACTL_D0);
- writel(umc_wdatactl[freq], dc_base + UMC_WDATACTL_D1);
-
- writel(umc_odtctl[freq], dc_base + UMC_ODTCTL_D0);
- writel(umc_odtctl[freq], dc_base + UMC_ODTCTL_D1);
-
- writel(0x00000003, dc_base + UMC_ACSSETA);
- writel(0x00000103, dc_base + UMC_FLOWCTLG);
- writel(umc_acssetb[ch], dc_base + UMC_ACSSETB);
- writel(0x02020200, dc_base + UMC_SPCSETB);
- writel(umc_memconfch[freq], dc_base + UMC_MEMCONFCH);
- writel(0x00000002, dc_base + UMC_ACFETCHCTRL);
-
- return 0;
-}
-
-static int umc_ch_init(void __iomem *umc_ch_base,
- enum dram_freq freq, unsigned long size, int ch)
-{
- void __iomem *dc_base = umc_ch_base;
-
- return umc_dc_init(dc_base, freq, size, ch);
-}
-
-static void um_init(void __iomem *um_base)
-{
- writel(0x00000001, um_base + UMC_SIORST);
- writel(0x00000001, um_base + UMC_VO0RST);
- writel(0x00000001, um_base + UMC_VPERST);
- writel(0x00000001, um_base + UMC_RGLRST);
- writel(0x00000001, um_base + UMC_A2DRST);
- writel(0x00000001, um_base + UMC_DMDRST);
-}
-
-int uniphier_ld11_umc_init(const struct uniphier_board_data *bd)
-{
- void __iomem *um_base = (void __iomem *)0x5B800000;
- void __iomem *umc_ch_base = (void __iomem *)0x5BC00000;
- void __iomem *phy_base = (void __iomem *)0x5BC01000;
- enum dram_freq freq;
- int ch, ret;
-
- switch (bd->dram_freq) {
- case 1600:
- freq = DRAM_FREQ_1600M;
- break;
- default:
- pr_err("unsupported DRAM frequency %d MHz\n", bd->dram_freq);
- return -EINVAL;
- }
-
- writel(0x00000101, umc_ch_base + UMC_DIOCTLA);
- while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
- cpu_relax();
-
- writel(0x00000000, umc_ch_base + UMC_DIOCTLA);
- writel(0x00000001, umc_ch_base + UMC_DEBUGC);
- writel(0x00000101, umc_ch_base + UMC_DIOCTLA);
-
- writel(0x00000100, umc_ch_base + UMC_INITSET);
- while (readl(umc_ch_base + UMC_INITSTAT) & BIT(8))
- cpu_relax();
-
- writel(0x00000100, umc_ch_base + 0x00200000 + UMC_INITSET);
- while (readl(umc_ch_base + 0x00200000 + UMC_INITSTAT) & BIT(8))
- cpu_relax();
-
- ddrphy_init(phy_base, freq);
-
- for (ch = 0; ch < DRAM_CH_NR; ch++) {
- unsigned long size = bd->dram_ch[ch].size;
- unsigned int width = bd->dram_ch[ch].width;
-
- ret = umc_ch_init(umc_ch_base, freq, size / (width / 16), ch);
- if (ret) {
- pr_err("failed to initialize UMC ch%d\n", ch);
- return ret;
- }
-
- umc_ch_base += 0x00200000;
- }
- ddrphy_training(phy_base);
-
- um_init(um_base);
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/dram/umc-ld20.c b/arch/arm/mach-uniphier/dram/umc-ld20.c
deleted file mode 100644
index 500c1c1..0000000
--- a/arch/arm/mach-uniphier/dram/umc-ld20.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Socionext Inc.
- *
- * based on commit 5ffd75ecd4929f22361ef65a35f0331d2fbc0f35 of Diag
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/bitops.h>
-#include <linux/compat.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <asm/processor.h>
-
-#include "../init.h"
-#include "ddruqphy-regs.h"
-#include "umc64-regs.h"
-
-#define DRAM_CH_NR 3
-
-enum dram_freq {
- DRAM_FREQ_1866M,
- DRAM_FREQ_NR,
-};
-
-enum dram_size {
- DRAM_SZ_256M,
- DRAM_SZ_512M,
- DRAM_SZ_NR,
-};
-
-enum dram_board { /* board type */
- DRAM_BOARD_LD20_REF, /* LD20 reference */
- DRAM_BOARD_LD20_GLOBAL, /* LD20 TV */
- DRAM_BOARD_LD20_C1, /* LD20 TV C1 */
- DRAM_BOARD_LD21_REF, /* LD21 reference */
- DRAM_BOARD_LD21_GLOBAL, /* LD21 TV */
- DRAM_BOARD_NR,
-};
-
-/* PHY */
-static const int ddrphy_adrctrl[DRAM_BOARD_NR][DRAM_CH_NR] = {
- {268 - 262, 268 - 263, 268 - 378}, /* LD20 reference */
- {268 - 262, 268 - 263, 268 - 378}, /* LD20 TV */
- {268 - 262, 268 - 263, 268 - 378}, /* LD20 TV C1 */
- {268 - 212, 268 - 268, /* No CH2 */}, /* LD21 reference */
- {268 - 212, 268 - 268, /* No CH2 */}, /* LD21 TV */
-};
-
-static const int ddrphy_dlltrimclk[DRAM_BOARD_NR][DRAM_CH_NR] = {
- {268, 268, 268}, /* LD20 reference */
- {268, 268, 268}, /* LD20 TV */
- {189, 189, 189}, /* LD20 TV C1 */
- {268, 268 + 252, /* No CH2 */}, /* LD21 reference */
- {268, 268 + 202, /* No CH2 */}, /* LD21 TV */
-};
-
-static const int ddrphy_dllrecalib[DRAM_BOARD_NR][DRAM_CH_NR] = {
- {268 - 378, 268 - 263, 268 - 378}, /* LD20 reference */
- {268 - 378, 268 - 263, 268 - 378}, /* LD20 TV */
- {268 - 378, 268 - 263, 268 - 378}, /* LD20 TV C1 */
- {268 - 212, 268 - 536, /* No CH2 */}, /* LD21 reference */
- {268 - 212, 268 - 536, /* No CH2 */}, /* LD21 TV */
-};
-
-static const u32 ddrphy_phy_pad_ctrl[DRAM_BOARD_NR][DRAM_CH_NR] = {
- {0x50B840B1, 0x50B840B1, 0x50B840B1}, /* LD20 reference */
- {0x50BB40B1, 0x50BB40B1, 0x50BB40B1}, /* LD20 TV */
- {0x50BB40B1, 0x50BB40B1, 0x50BB40B1}, /* LD20 TV C1 */
- {0x50BB40B4, 0x50B840B1, /* No CH2 */}, /* LD21 reference */
- {0x50BB40B4, 0x50B840B1, /* No CH2 */}, /* LD21 TV */
-};
-
-static const u32 ddrphy_scl_gate_timing[DRAM_CH_NR] = {
- 0x00000140, 0x00000180, 0x00000140
-};
-
-static const short ddrphy_op_dq_shift_val_ld20[DRAM_CH_NR][32] = {
- {
- 2, 1, 0, 1, 2, 1, 1, 1,
- 2, 1, 1, 2, 1, 1, 1, 1,
- 1, 2, 1, 1, 1, 2, 1, 1,
- 2, 2, 0, 1, 1, 2, 2, 1,
- },
- {
- 1, 1, 0, 1, 2, 2, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 0, 0, 1, 1, 0, 0,
- 0, 1, 1, 1, 2, 1, 2, 1,
- },
- {
- 2, 2, 0, 2, 1, 1, 2, 1,
- 1, 1, 0, 1, 1, -1, 1, 1,
- 2, 2, 2, 2, 1, 1, 1, 1,
- 1, 1, 1, 0, 2, 2, 1, 2,
- },
-};
-
-static const short ddrphy_op_dq_shift_val_ld21[DRAM_CH_NR][32] = {
- {
- 1, 1, 0, 1, 1, 1, 1, 1,
- 1, 0, 0, 0, 1, 1, 0, 2,
- 1, 1, 0, 0, 1, 1, 1, 1,
- 1, 0, 0, 0, 1, 0, 0, 1,
- },
- { 1, 0, 2, 1, 1, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 0, 0,
- 1, 0, 1, 0, 1, 1, 1, 0,
- 1, 1, 1, 1, 0, 1, 0, 0,
- },
- /* No CH2 */
-};
-
-static const short (* const ddrphy_op_dq_shift_val[DRAM_BOARD_NR])[32] = {
- ddrphy_op_dq_shift_val_ld20, /* LD20 reference */
- ddrphy_op_dq_shift_val_ld20, /* LD20 TV */
- ddrphy_op_dq_shift_val_ld20, /* LD20 TV C */
- ddrphy_op_dq_shift_val_ld21, /* LD21 reference */
- ddrphy_op_dq_shift_val_ld21, /* LD21 TV */
-};
-
-static const short ddrphy_ip_dq_shift_val_ld20[DRAM_CH_NR][32] = {
- {
- 3, 3, 3, 2, 3, 2, 0, 2,
- 2, 3, 3, 1, 2, 2, 2, 2,
- 2, 2, 2, 2, 0, 1, 1, 1,
- 2, 2, 2, 2, 3, 0, 2, 2,
- },
- {
- 2, 2, 1, 1, -1, 1, 1, 1,
- 2, 0, 2, 2, 2, 1, 0, 2,
- 2, 1, 2, 1, 0, 1, 1, 1,
- 2, 2, 2, 2, 2, 2, 2, 2,
- },
- {
- 2, 2, 3, 2, 1, 2, 2, 2,
- 2, 3, 4, 2, 3, 4, 3, 3,
- 2, 2, 1, 2, 1, 1, 1, 1,
- 2, 2, 2, 2, 1, 2, 2, 1,
- },
-};
-
-static const short ddrphy_ip_dq_shift_val_ld21[DRAM_CH_NR][32] = {
- {
- 2, 2, 2, 2, 1, 2, 2, 2,
- 2, 3, 3, 2, 2, 2, 2, 2,
- 2, 1, 2, 2, 1, 1, 1, 1,
- 2, 2, 2, 3, 1, 2, 2, 2,
- },
- {
- 3, 4, 4, 1, 0, 1, 1, 1,
- 1, 2, 1, 2, 2, 3, 3, 2,
- 1, 0, 2, 1, 1, 0, 1, 0,
- 0, 1, 0, 0, 1, 1, 0, 1,
- },
- /* No CH2 */
-};
-
-static const short (* const ddrphy_ip_dq_shift_val[DRAM_BOARD_NR])[32] = {
- ddrphy_ip_dq_shift_val_ld20, /* LD20 reference */
- ddrphy_ip_dq_shift_val_ld20, /* LD20 TV */
- ddrphy_ip_dq_shift_val_ld20, /* LD20 TV C */
- ddrphy_ip_dq_shift_val_ld21, /* LD21 reference */
- ddrphy_ip_dq_shift_val_ld21, /* LD21 TV */
-};
-
-static void ddrphy_select_lane(void __iomem *phy_base, unsigned int lane,
- unsigned int bit)
-{
- WARN_ON(lane >= 1 << PHY_LANE_SEL_LANE_WIDTH);
- WARN_ON(bit >= 1 << PHY_LANE_SEL_BIT_WIDTH);
-
- writel((bit << PHY_LANE_SEL_BIT_SHIFT) |
- (lane << PHY_LANE_SEL_LANE_SHIFT),
- phy_base + PHY_LANE_SEL);
-}
-
-#define DDRPHY_EFUSEMON (void *)0x5f900118
-
-static void ddrphy_init(void __iomem *phy_base, enum dram_board board, int ch)
-{
- writel(0x0C001001, phy_base + PHY_UNIQUIFY_TSMC_IO_1);
- while (!(readl(phy_base + PHY_UNIQUIFY_TSMC_IO_1) & BIT(1)))
- cpu_relax();
-
- if (readl(DDRPHY_EFUSEMON) & BIT(ch))
- writel(0x00000000, phy_base + PHY_UNIQUIFY_TSMC_IO_1);
- else
- writel(0x0C001000, phy_base + PHY_UNIQUIFY_TSMC_IO_1);
-
- writel(0x00000000, phy_base + PHY_DLL_INCR_TRIM_3);
- writel(0x00000000, phy_base + PHY_DLL_INCR_TRIM_1);
- ddrphy_select_lane(phy_base, 0, 0);
- writel(0x00000005, phy_base + PHY_DLL_TRIM_1);
- writel(0x0000000a, phy_base + PHY_DLL_TRIM_3);
- ddrphy_select_lane(phy_base, 6, 0);
- writel(0x00000005, phy_base + PHY_DLL_TRIM_1);
- writel(0x0000000a, phy_base + PHY_DLL_TRIM_3);
- ddrphy_select_lane(phy_base, 12, 0);
- writel(0x00000005, phy_base + PHY_DLL_TRIM_1);
- writel(0x0000000a, phy_base + PHY_DLL_TRIM_3);
- ddrphy_select_lane(phy_base, 18, 0);
- writel(0x00000005, phy_base + PHY_DLL_TRIM_1);
- writel(0x0000000a, phy_base + PHY_DLL_TRIM_3);
- writel(0x00000001, phy_base + PHY_SCL_WINDOW_TRIM);
- writel(0x00000000, phy_base + PHY_UNQ_ANALOG_DLL_1);
- writel(ddrphy_phy_pad_ctrl[board][ch], phy_base + PHY_PAD_CTRL);
- writel(0x00000070, phy_base + PHY_VREF_TRAINING);
- writel(0x01000075, phy_base + PHY_SCL_CONFIG_1);
- writel(0x00000501, phy_base + PHY_SCL_CONFIG_2);
- writel(0x00000000, phy_base + PHY_SCL_CONFIG_3);
- writel(0x000261c0, phy_base + PHY_DYNAMIC_WRITE_BIT_LVL);
- writel(0x00000000, phy_base + PHY_SCL_CONFIG_4);
- writel(ddrphy_scl_gate_timing[ch], phy_base + PHY_SCL_GATE_TIMING);
- writel(0x02a000a0, phy_base + PHY_WRLVL_DYN_ODT);
- writel(0x00840004, phy_base + PHY_WRLVL_ON_OFF);
- writel(0x0000020d, phy_base + PHY_DLL_ADRCTRL);
- ddrphy_select_lane(phy_base, 0, 0);
- writel(0x0000008d, phy_base + PHY_DLL_TRIM_CLK);
- writel(0xa800100d, phy_base + PHY_DLL_RECALIB);
- writel(0x00005076, phy_base + PHY_SCL_LATENCY);
-}
-
-static int ddrphy_to_dly_step(void __iomem *phy_base, unsigned int freq,
- int delay)
-{
- int mdl;
-
- mdl = (readl(phy_base + PHY_DLL_ADRCTRL) & PHY_DLL_ADRCTRL_MDL_MASK) >>
- PHY_DLL_ADRCTRL_MDL_SHIFT;
-
- return DIV_ROUND_CLOSEST((long)freq * delay * mdl, 2 * 1000000L);
-}
-
-static void ddrphy_set_delay(void __iomem *phy_base, unsigned int reg,
- u32 mask, u32 incr, int dly_step)
-{
- u32 tmp;
-
- tmp = readl(phy_base + reg);
- tmp &= ~mask;
- tmp |= min_t(u32, abs(dly_step), mask);
-
- if (dly_step >= 0)
- tmp |= incr;
- else
- tmp &= ~incr;
-
- writel(tmp, phy_base + reg);
-}
-
-static void ddrphy_set_dll_recalib(void __iomem *phy_base, int dly_step)
-{
- ddrphy_set_delay(phy_base, PHY_DLL_RECALIB,
- PHY_DLL_RECALIB_TRIM_MASK, PHY_DLL_RECALIB_INCR,
- dly_step);
-}
-
-static void ddrphy_set_dll_adrctrl(void __iomem *phy_base, int dly_step)
-{
- ddrphy_set_delay(phy_base, PHY_DLL_ADRCTRL,
- PHY_DLL_ADRCTRL_TRIM_MASK, PHY_DLL_ADRCTRL_INCR,
- dly_step);
-}
-
-static void ddrphy_set_dll_trim_clk(void __iomem *phy_base, int dly_step)
-{
- ddrphy_select_lane(phy_base, 0, 0);
-
- ddrphy_set_delay(phy_base, PHY_DLL_TRIM_CLK,
- PHY_DLL_TRIM_CLK_MASK, PHY_DLL_TRIM_CLK_INCR,
- dly_step);
-}
-
-static void ddrphy_init_tail(void __iomem *phy_base, enum dram_board board,
- unsigned int freq, int ch)
-{
- int step;
-
- step = ddrphy_to_dly_step(phy_base, freq, ddrphy_adrctrl[board][ch]);
- ddrphy_set_dll_adrctrl(phy_base, step);
-
- step = ddrphy_to_dly_step(phy_base, freq, ddrphy_dlltrimclk[board][ch]);
- ddrphy_set_dll_trim_clk(phy_base, step);
-
- step = ddrphy_to_dly_step(phy_base, freq, ddrphy_dllrecalib[board][ch]);
- ddrphy_set_dll_recalib(phy_base, step);
-}
-
-static void ddrphy_shift_one_dq(void __iomem *phy_base, unsigned int reg,
- u32 mask, u32 incr, short shift_val)
-{
- u32 tmp;
- int val;
-
- tmp = readl(phy_base + reg);
-
- val = tmp & mask;
- if (!(tmp & incr))
- val = -val;
-
- val += shift_val;
-
- tmp &= ~(incr | mask);
- tmp |= min_t(u32, abs(val), mask);
- if (val >= 0)
- tmp |= incr;
-
- writel(tmp, phy_base + reg);
-}
-
-static void ddrphy_shift_dq(void __iomem *phy_base, unsigned int reg,
- u32 mask, u32 incr, u32 override,
- const short *shift_val_array)
-{
- u32 tmp;
- int dx, bit;
-
- tmp = readl(phy_base + reg);
- tmp |= override;
- writel(tmp, phy_base + reg);
-
- for (dx = 0; dx < 4; dx++) {
- for (bit = 0; bit < 8; bit++) {
- ddrphy_select_lane(phy_base,
- (PHY_BITLVL_DLY_WIDTH + 1) * dx,
- bit);
-
- ddrphy_shift_one_dq(phy_base, reg, mask, incr,
- shift_val_array[dx * 8 + bit]);
- }
- }
-
- ddrphy_select_lane(phy_base, 0, 0);
-}
-
-static int ddrphy_training(void __iomem *phy_base, enum dram_board board,
- int ch)
-{
- writel(0x0000000f, phy_base + PHY_WRLVL_AUTOINC_TRIM);
- writel(0x00010000, phy_base + PHY_DLL_TRIM_2);
- writel(0x50000000, phy_base + PHY_SCL_START);
-
- while (readl(phy_base + PHY_SCL_START) & PHY_SCL_START_GO_DONE)
- cpu_relax();
-
- writel(0x00000000, phy_base + PHY_DISABLE_GATING_FOR_SCL);
- writel(0xff00ff00, phy_base + PHY_SCL_DATA_0);
- writel(0xff00ff00, phy_base + PHY_SCL_DATA_1);
- writel(0xFBF8FFFF, phy_base + PHY_SCL_START_ADDR);
- writel(0x11000000, phy_base + PHY_SCL_START);
-
- while (readl(phy_base + PHY_SCL_START) & PHY_SCL_START_GO_DONE)
- cpu_relax();
-
- writel(0xFBF0FFFF, phy_base + PHY_SCL_START_ADDR);
- writel(0x30500000, phy_base + PHY_SCL_START);
-
- while (readl(phy_base + PHY_SCL_START) & PHY_SCL_START_GO_DONE)
- cpu_relax();
-
- writel(0x00000001, phy_base + PHY_DISABLE_GATING_FOR_SCL);
- writel(0x00000010, phy_base + PHY_SCL_MAIN_CLK_DELTA);
- writel(0x789b3de0, phy_base + PHY_SCL_DATA_0);
- writel(0xf10e4a56, phy_base + PHY_SCL_DATA_1);
- writel(0x11000000, phy_base + PHY_SCL_START);
-
- while (readl(phy_base + PHY_SCL_START) & PHY_SCL_START_GO_DONE)
- cpu_relax();
-
- writel(0x34000000, phy_base + PHY_SCL_START);
-
- while (readl(phy_base + PHY_SCL_START) & PHY_SCL_START_GO_DONE)
- cpu_relax();
-
- writel(0x00000003, phy_base + PHY_DISABLE_GATING_FOR_SCL);
-
- writel(0x000261c0, phy_base + PHY_DYNAMIC_WRITE_BIT_LVL);
- writel(0x00003270, phy_base + PHY_DYNAMIC_BIT_LVL);
- writel(0x011BD0C4, phy_base + PHY_DSCL_CNT);
-
- /* shift ip_dq trim */
- ddrphy_shift_dq(phy_base,
- PHY_IP_DQ_DQS_BITWISE_TRIM,
- PHY_IP_DQ_DQS_BITWISE_TRIM_MASK,
- PHY_IP_DQ_DQS_BITWISE_TRIM_INC,
- PHY_IP_DQ_DQS_BITWISE_TRIM_OVERRIDE,
- ddrphy_ip_dq_shift_val[board][ch]);
-
- /* shift op_dq trim */
- ddrphy_shift_dq(phy_base,
- PHY_OP_DQ_DM_DQS_BITWISE_TRIM,
- PHY_OP_DQ_DM_DQS_BITWISE_TRIM_MASK,
- PHY_OP_DQ_DM_DQS_BITWISE_TRIM_INC,
- PHY_OP_DQ_DM_DQS_BITWISE_TRIM_OVERRIDE,
- ddrphy_op_dq_shift_val[board][ch]);
-
- return 0;
-}
-
-/* UMC */
-static const u32 umc_initctla[DRAM_FREQ_NR] = {0x71016D11};
-static const u32 umc_initctlb[DRAM_FREQ_NR] = {0x07E390AC};
-static const u32 umc_initctlc[DRAM_FREQ_NR] = {0x00FF00FF};
-static const u32 umc_drmmr0[DRAM_FREQ_NR] = {0x00000114};
-static const u32 umc_drmmr2[DRAM_FREQ_NR] = {0x000002a0};
-
-static const u32 umc_memconf0a[DRAM_FREQ_NR][DRAM_SZ_NR] = {
- /* 256MB 512MB */
- {0x00000601, 0x00000801}, /* 1866 MHz */
-};
-
-static const u32 umc_memconf0b[DRAM_FREQ_NR][DRAM_SZ_NR] = {
- /* 256MB 512MB */
- {0x00000120, 0x00000130}, /* 1866 MHz */
-};
-
-static const u32 umc_memconfch[DRAM_FREQ_NR][DRAM_SZ_NR] = {
- /* 256MB 512MB */
- {0x00033603, 0x00033803}, /* 1866 MHz */
-};
-
-static const u32 umc_cmdctla[DRAM_FREQ_NR] = {0x060D0D20};
-static const u32 umc_cmdctlb[DRAM_FREQ_NR] = {0x2D211C08};
-static const u32 umc_cmdctlc[DRAM_FREQ_NR] = {0x00150C04};
-static const u32 umc_cmdctle[DRAM_FREQ_NR][DRAM_SZ_NR] = {
- /* 256MB 512MB */
- {0x0049071D, 0x0078071D}, /* 1866 MHz */
-};
-
-static const u32 umc_rdatactl[DRAM_FREQ_NR] = {0x00000610};
-static const u32 umc_wdatactl[DRAM_FREQ_NR] = {0x00000204};
-static const u32 umc_odtctl[DRAM_FREQ_NR] = {0x02000002};
-static const u32 umc_dataset[DRAM_FREQ_NR] = {0x04000000};
-
-static const u32 umc_flowctla[DRAM_FREQ_NR] = {0x0081E01E};
-static const u32 umc_directbusctrla[DRAM_CH_NR] = {
- 0x00000000, 0x00000001, 0x00000001
-};
-
-static void umc_poll_phy_init_complete(void __iomem *dc_base)
-{
- /* Wait for PHY Init Complete */
- while (!(readl(dc_base + UMC_DFISTCTLC) & BIT(0)))
- cpu_relax();
-}
-
-static int umc_dc_init(void __iomem *dc_base, unsigned int freq,
- unsigned long size, int ch)
-{
- enum dram_freq freq_e;
- enum dram_size size_e;
-
- switch (freq) {
- case 1866:
- freq_e = DRAM_FREQ_1866M;
- break;
- default:
- pr_err("unsupported DRAM frequency %ud MHz\n", freq);
- return -EINVAL;
- }
-
- switch (size) {
- case 0:
- return 0;
- case SZ_256M:
- size_e = DRAM_SZ_256M;
- break;
- case SZ_512M:
- size_e = DRAM_SZ_512M;
- break;
- default:
- pr_err("unsupported DRAM size 0x%08lx (per 16bit) for ch%d\n",
- size, ch);
- return -EINVAL;
- }
-
- writel(0x00000001, dc_base + UMC_DFICSOVRRD);
- writel(0x00000000, dc_base + UMC_DFITURNOFF);
-
- writel(umc_initctla[freq_e], dc_base + UMC_INITCTLA);
- writel(umc_initctlb[freq_e], dc_base + UMC_INITCTLB);
- writel(umc_initctlc[freq_e], dc_base + UMC_INITCTLC);
-
- writel(umc_drmmr0[freq_e], dc_base + UMC_DRMMR0);
- writel(0x00000004, dc_base + UMC_DRMMR1);
- writel(umc_drmmr2[freq_e], dc_base + UMC_DRMMR2);
- writel(0x00000000, dc_base + UMC_DRMMR3);
-
- writel(umc_memconf0a[freq_e][size_e], dc_base + UMC_MEMCONF0A);
- writel(umc_memconf0b[freq_e][size_e], dc_base + UMC_MEMCONF0B);
- writel(umc_memconfch[freq_e][size_e], dc_base + UMC_MEMCONFCH);
- writel(0x00000000, dc_base + UMC_MEMMAPSET);
-
- writel(umc_cmdctla[freq_e], dc_base + UMC_CMDCTLA);
- writel(umc_cmdctlb[freq_e], dc_base + UMC_CMDCTLB);
- writel(umc_cmdctlc[freq_e], dc_base + UMC_CMDCTLC);
- writel(umc_cmdctle[freq_e][size_e], dc_base + UMC_CMDCTLE);
-
- writel(umc_rdatactl[freq_e], dc_base + UMC_RDATACTL_D0);
- writel(umc_rdatactl[freq_e], dc_base + UMC_RDATACTL_D1);
-
- writel(umc_wdatactl[freq_e], dc_base + UMC_WDATACTL_D0);
- writel(umc_wdatactl[freq_e], dc_base + UMC_WDATACTL_D1);
- writel(umc_odtctl[freq_e], dc_base + UMC_ODTCTL_D0);
- writel(umc_odtctl[freq_e], dc_base + UMC_ODTCTL_D1);
- writel(umc_dataset[freq_e], dc_base + UMC_DATASET);
-
- writel(0x00400020, dc_base + UMC_DCCGCTL);
- writel(0x00000003, dc_base + UMC_ACSSETA);
- writel(0x00000103, dc_base + UMC_FLOWCTLG);
- writel(0x00010200, dc_base + UMC_ACSSETB);
-
- writel(umc_flowctla[freq_e], dc_base + UMC_FLOWCTLA);
- writel(0x00004444, dc_base + UMC_FLOWCTLC);
- writel(0x00000000, dc_base + UMC_DFICUPDCTLA);
-
- writel(0x00202000, dc_base + UMC_FLOWCTLB);
- writel(0x00000000, dc_base + UMC_BSICMAPSET);
- writel(0x00000000, dc_base + UMC_ERRMASKA);
- writel(0x00000000, dc_base + UMC_ERRMASKB);
-
- writel(umc_directbusctrla[ch], dc_base + UMC_DIRECTBUSCTRLA);
-
- writel(0x00000001, dc_base + UMC_INITSET);
- /* Wait for PHY Init Complete */
- while (readl(dc_base + UMC_INITSTAT) & BIT(0))
- cpu_relax();
-
- writel(0x2A0A0A00, dc_base + UMC_SPCSETB);
- writel(0x00000000, dc_base + UMC_DFICSOVRRD);
-
- return 0;
-}
-
-static int umc_ch_init(void __iomem *umc_ch_base, void __iomem *phy_ch_base,
- enum dram_board board, unsigned int freq,
- unsigned long size, int ch)
-{
- void __iomem *dc_base = umc_ch_base + 0x00011000;
- void __iomem *phy_base = phy_ch_base;
- int ret;
-
- /* PHY Update Mode (ON) */
- writel(0x8000003f, dc_base + UMC_DFIPUPDCTLA);
-
- /* deassert PHY reset signals */
- writel(UMC_DIOCTLA_CTL_NRST | UMC_DIOCTLA_CFG_NRST,
- dc_base + UMC_DIOCTLA);
-
- ddrphy_init(phy_base, board, ch);
-
- umc_poll_phy_init_complete(dc_base);
-
- ddrphy_init_tail(phy_base, board, freq, ch);
-
- ret = umc_dc_init(dc_base, freq, size, ch);
- if (ret)
- return ret;
-
- ret = ddrphy_training(phy_base, board, ch);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static void um_init(void __iomem *um_base)
-{
- writel(0x000000ff, um_base + UMC_MBUS0);
- writel(0x000000ff, um_base + UMC_MBUS1);
- writel(0x000000ff, um_base + UMC_MBUS2);
- writel(0x00000001, um_base + UMC_MBUS3);
- writel(0x00000001, um_base + UMC_MBUS4);
- writel(0x00000001, um_base + UMC_MBUS5);
- writel(0x00000001, um_base + UMC_MBUS6);
- writel(0x00000001, um_base + UMC_MBUS7);
- writel(0x00000001, um_base + UMC_MBUS8);
- writel(0x00000001, um_base + UMC_MBUS9);
- writel(0x00000001, um_base + UMC_MBUS10);
-}
-
-int uniphier_ld20_umc_init(const struct uniphier_board_data *bd)
-{
- void __iomem *um_base = (void __iomem *)0x5b600000;
- void __iomem *umc_ch_base = (void __iomem *)0x5b800000;
- void __iomem *phy_ch_base = (void __iomem *)0x6e200000;
- enum dram_board board;
- int ch, ret;
-
- switch (UNIPHIER_BD_BOARD_GET_TYPE(bd->flags)) {
- case UNIPHIER_BD_BOARD_LD20_REF:
- board = DRAM_BOARD_LD20_REF;
- break;
- case UNIPHIER_BD_BOARD_LD20_GLOBAL:
- board = DRAM_BOARD_LD20_GLOBAL;
- break;
- case UNIPHIER_BD_BOARD_LD20_C1:
- board = DRAM_BOARD_LD20_C1;
- break;
- case UNIPHIER_BD_BOARD_LD21_REF:
- board = DRAM_BOARD_LD21_REF;
- break;
- case UNIPHIER_BD_BOARD_LD21_GLOBAL:
- board = DRAM_BOARD_LD21_GLOBAL;
- break;
- default:
- pr_err("unsupported board type %d\n",
- UNIPHIER_BD_BOARD_GET_TYPE(bd->flags));
- return -EINVAL;
- }
-
- for (ch = 0; ch < DRAM_CH_NR; ch++) {
- unsigned long size = bd->dram_ch[ch].size;
- unsigned int width = bd->dram_ch[ch].width;
-
- if (size) {
- ret = umc_ch_init(umc_ch_base, phy_ch_base, board,
- bd->dram_freq, size / (width / 16),
- ch);
- if (ret) {
- pr_err("failed to initialize UMC ch%d\n", ch);
- return ret;
- }
- }
-
- umc_ch_base += 0x00200000;
- phy_ch_base += 0x00004000;
- }
-
- um_init(um_base);
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/dram/umc64-regs.h b/arch/arm/mach-uniphier/dram/umc64-regs.h
deleted file mode 100644
index 860d04e..0000000
--- a/arch/arm/mach-uniphier/dram/umc64-regs.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2016 Socionext Inc.
- */
-
-#ifndef UMC_LD20_REGS_H
-#define UMC_LD20_REGS_H
-
-#define UMC_CMDCTLA 0x00000000
-#define UMC_CMDCTLB 0x00000004
-#define UMC_CMDCTLC 0x00000008
-#define UMC_INITCTLA 0x00000020
-#define UMC_INITCTLB 0x00000024
-#define UMC_INITCTLC 0x00000028
-#define UMC_DRMMR0 0x00000030
-#define UMC_DRMMR1 0x00000034
-#define UMC_DRMMR2 0x00000038
-#define UMC_DRMMR3 0x0000003C
-#define UMC_INITSET 0x00000040
-#define UMC_INITSTAT 0x00000044
-#define UMC_CMDCTLE 0x00000050
-#define UMC_CMDCTLF 0x00000054
-#define UMC_CMDCTLG 0x00000058
-#define UMC_SPCSETB 0x00000084
-#define UMC_SPCSETB_AREFMD_MASK (0x3) /* Auto Refresh Mode */
-#define UMC_SPCSETB_AREFMD_ARB (0x0) /* control by arbitor */
-#define UMC_SPCSETB_AREFMD_CONT (0x1) /* control by DRAMCONT */
-#define UMC_SPCSETB_AREFMD_REG (0x2) /* control by register */
-#define UMC_ACSSETA 0x000000C0
-#define UMC_ACSSETB 0x000000C4
-#define UMC_MEMCONF0A 0x00000200
-#define UMC_MEMCONF0B 0x00000204
-#define UMC_MEMCONFCH 0x00000240
-#define UMC_MEMMAPSET 0x00000250
-#define UMC_FLOWCTLA 0x00000400
-#define UMC_FLOWCTLB 0x00000404
-#define UMC_FLOWCTLC 0x00000408
-#define UMC_ACFETCHCTRL 0x00000460
-#define UMC_FLOWCTLG 0x00000508
-#define UMC_RDATACTL_D0 0x00000600
-#define UMC_WDATACTL_D0 0x00000604
-#define UMC_RDATACTL_D1 0x00000608
-#define UMC_WDATACTL_D1 0x0000060C
-#define UMC_DATASET 0x00000610
-#define UMC_ODTCTL_D0 0x00000618
-#define UMC_ODTCTL_D1 0x0000061C
-#define UMC_RESPCTL 0x00000624
-#define UMC_DIRECTBUSCTRLA 0x00000680
-#define UMC_DEBUGC 0x00000718
-#define UMC_DCCGCTL 0x00000720
-#define UMC_DICGCTLA 0x00000724
-#define UMC_DICGCTLB 0x00000728
-#define UMC_ERRMASKA 0x00000958
-#define UMC_ERRMASKB 0x0000095C
-#define UMC_BSICMAPSET 0x00000988
-#define UMC_DIOCTLA 0x00000C00
-#define UMC_DIOCTLA_CTL_NRST BIT(8) /* ctl_rst_n */
-#define UMC_DIOCTLA_CFG_NRST BIT(0) /* cfg_rst_n */
-#define UMC_DFISTCTLC 0x00000C18
-#define UMC_DFICUPDCTLA 0x00000C20
-#define UMC_DFIPUPDCTLA 0x00000C30
-#define UMC_DFICSOVRRD 0x00000C84
-#define UMC_DFITURNOFF 0x00000C88
-
-/* UM registers */
-#define UMC_MBUS0 0x00080004
-#define UMC_MBUS1 0x00081004
-#define UMC_MBUS2 0x00082004
-#define UMC_MBUS3 0x00000C78
-#define UMC_MBUS4 0x00000CF8
-#define UMC_MBUS5 0x00000E78
-#define UMC_MBUS6 0x00000EF8
-#define UMC_MBUS7 0x00001278
-#define UMC_MBUS8 0x000012F8
-#define UMC_MBUS9 0x00002478
-#define UMC_MBUS10 0x000024F8
-
-/* UMC1 register */
-#define UMC_SIORST 0x00000728
-#define UMC_VO0RST 0x0000073c
-#define UMC_VPERST 0x00000744
-#define UMC_RGLRST 0x00000750
-#define UMC_A2DRST 0x00000764
-#define UMC_DMDRST 0x00000770
-
-#endif /* UMC_LD20_REGS_H */
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 56f514e..b322628 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -24,13 +24,6 @@
#define UNIPHIER_BD_DRAM_SPARSE BIT(9)
#define UNIPHIER_BD_DDR3PLUS BIT(8)
-
-#define UNIPHIER_BD_BOARD_GET_TYPE(f) ((f) & 0x7)
-#define UNIPHIER_BD_BOARD_LD20_REF 0 /* LD20 reference */
-#define UNIPHIER_BD_BOARD_LD20_GLOBAL 1 /* LD20 TV Set */
-#define UNIPHIER_BD_BOARD_LD20_C1 2 /* LD20 TV Set C1 */
-#define UNIPHIER_BD_BOARD_LD21_REF 3 /* LD21 reference */
-#define UNIPHIER_BD_BOARD_LD21_GLOBAL 4 /* LD21 TV Set */
};
const struct uniphier_board_data *uniphier_get_board_param(void);
@@ -41,8 +34,6 @@
int uniphier_sld8_init(const struct uniphier_board_data *bd);
int uniphier_pro5_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_init(const struct uniphier_board_data *bd);
-int uniphier_ld11_init(const struct uniphier_board_data *bd);
-int uniphier_ld20_init(const struct uniphier_board_data *bd);
#if defined(CONFIG_MICRO_SUPPORT_CARD)
void uniphier_sbc_init_admulti(void);
@@ -85,17 +76,12 @@
int uniphier_sld8_dpll_init(const struct uniphier_board_data *bd);
int uniphier_pro5_dpll_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_dpll_init(const struct uniphier_board_data *bd);
-int uniphier_ld11_dpll_init(const struct uniphier_board_data *bd);
-int uniphier_ld20_dpll_init(const struct uniphier_board_data *bd);
void uniphier_sld3_early_clk_init(void);
-void uniphier_ld11_early_clk_init(void);
void uniphier_sld3_dram_clk_init(void);
void uniphier_pro5_dram_clk_init(void);
void uniphier_pxs2_dram_clk_init(void);
-void uniphier_ld11_dram_clk_init(void);
-void uniphier_ld20_dram_clk_init(void);
int uniphier_sld3_umc_init(const struct uniphier_board_data *bd);
int uniphier_ld4_umc_init(const struct uniphier_board_data *bd);
@@ -103,8 +89,6 @@
int uniphier_sld8_umc_init(const struct uniphier_board_data *bd);
int uniphier_pro5_umc_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_umc_init(const struct uniphier_board_data *bd);
-int uniphier_ld20_umc_init(const struct uniphier_board_data *bd);
-int uniphier_ld11_umc_init(const struct uniphier_board_data *bd);
void uniphier_sld3_pll_init(void);
void uniphier_ld4_pll_init(void);
@@ -125,8 +109,6 @@
int uniphier_have_internal_stm(void);
int uniphier_boot_from_backend(void);
int uniphier_pin_init(const char *pinconfig_name);
-void uniphier_smp_kick_all_cpus(void);
-void cci500_init(unsigned int nr_slaves);
#undef pr_warn
#define pr_warn(fmt, args...) printf(fmt, ##args)
diff --git a/arch/arm/mach-uniphier/spl_board_init.c b/arch/arm/mach-uniphier/spl_board_init.c
index 0079a08..6da5631 100644
--- a/arch/arm/mach-uniphier/spl_board_init.c
+++ b/arch/arm/mach-uniphier/spl_board_init.c
@@ -97,26 +97,6 @@
.umc_init = uniphier_pxs2_umc_init,
},
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
- {
- .soc_id = UNIPHIER_LD11_ID,
- .early_clk_init = uniphier_ld11_early_clk_init,
- .dpll_init = uniphier_ld11_dpll_init,
- .memconf_init = uniphier_memconf_2ch_init,
- .dram_clk_init = uniphier_ld11_dram_clk_init,
- .umc_init = uniphier_ld11_umc_init,
- },
-#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD20)
- {
- .soc_id = UNIPHIER_LD20_ID,
- .early_clk_init = uniphier_ld11_early_clk_init,
- .dpll_init = uniphier_ld20_dpll_init,
- .memconf_init = uniphier_memconf_3ch_init,
- .dram_clk_init = uniphier_ld20_dram_clk_init,
- .umc_init = uniphier_ld20_umc_init,
- },
-#endif
};
UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_spl_initdata, uniphier_spl_initdata)
@@ -141,10 +121,8 @@
if (initdata->bcu_init)
initdata->bcu_init(bd);
-
initdata->early_clk_init();
-
#ifdef CONFIG_SPL_SERIAL_SUPPORT
preloader_console_init();
#endif
@@ -168,8 +146,4 @@
pr_err("failed to init DRAM\n");
hang();
}
-
-#ifdef CONFIG_ARM64
- dcache_disable();
-#endif
}
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 79dc0cf..baf4f51 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -31,8 +31,8 @@
mts rshr, r1
addi r1, r1, -4 /* Decrement SP to top of memory */
#else
-#if defined(CONFIG_SYS_MALLOC_F_LEN)
- addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET - CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+ addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET - CONFIG_VAL(SYS_MALLOC_F_LEN)
#else
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
#endif
@@ -162,14 +162,14 @@
#ifndef CONFIG_SPL_BUILD
or r5, r0, r0 /* flags - empty */
addi r31, r0, _gd
-#if defined(CONFIG_SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
addi r6, r0, CONFIG_SYS_INIT_SP_OFFSET
swi r6, r31, GD_MALLOC_BASE
#endif
brai board_init_f
#else
addi r31, r0, _gd
-#if defined(CONFIG_SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
addi r6, r0, CONFIG_SPL_STACK_ADDR
swi r6, r31, GD_MALLOC_BASE
#endif
diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink
new file mode 100644
index 0000000..7da3acd
--- /dev/null
+++ b/arch/mips/Makefile.postlink
@@ -0,0 +1,23 @@
+#
+# Copyright (c) 2017 Imagination Technologies Ltd.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PHONY := __archpost
+__archpost:
+
+-include include/config/auto.conf
+include scripts/Kbuild.include
+
+CMD_RELOCS = tools/mips-relocs
+quiet_cmd_relocs = RELOCS $@
+ cmd_relocs = $(CMD_RELOCS) $@
+
+u-boot: FORCE
+ @true
+ $(call if_changed,relocs)
+
+.PHONY: FORCE
+
+FORCE:
diff --git a/arch/mips/config.mk b/arch/mips/config.mk
index 2c72c15..cefdbe6 100644
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
@@ -56,25 +56,14 @@
# LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
# MODFLAGS += -mlong-calls
#
-# On the other hand, we want PIC in the U-Boot code to relocate it from ROM
-# to RAM. $28 is always used as gp.
-#
-ifdef CONFIG_SPL_BUILD
-PF_ABICALLS := -mno-abicalls
-PF_PIC := -fno-pic
-PF_PIE :=
-else
-PF_ABICALLS := -mabicalls
-PF_PIC := -fpic
-PF_PIE := -pie
-PF_OBJCOPY := -j .got -j .rel.dyn -j .padding
-PF_OBJCOPY += -j .dtb.init.rodata
+ifndef CONFIG_SPL_BUILD
+OBJCOPYFLAGS += -j .got -j .rel -j .padding -j .dtb.init.rodata
+LDFLAGS_FINAL += --emit-relocs
endif
-PLATFORM_CPPFLAGS += -G 0 $(PF_ABICALLS) $(PF_PIC)
+PLATFORM_CPPFLAGS += -G 0 -mno-abicalls -fno-pic
PLATFORM_CPPFLAGS += -msoft-float
PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-LDFLAGS_FINAL += --gc-sections $(PF_PIE)
+LDFLAGS_FINAL += --gc-sections
OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list
-OBJCOPYFLAGS += $(PF_OBJCOPY)
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index d01ee9f..42af9de 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -60,8 +60,8 @@
sp, sp, GD_SIZE # reserve space for gd
and sp, sp, t0 # force 16 byte alignment
move k0, sp # save gd pointer
-#ifdef CONFIG_SYS_MALLOC_F_LEN
- li t2, CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+ li t2, CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_SUBU \
sp, sp, t2 # reserve space for early malloc
and sp, sp, t0 # force 16 byte alignment
@@ -75,7 +75,7 @@
blt t0, t1, 1b
PTR_ADDIU t0, PTRSIZE
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset
#endif
.endm
@@ -221,18 +221,6 @@
ehb
#endif
- /*
- * Initialize $gp, force pointer sized alignment of bal instruction to
- * forbid the compiler to put nop's between bal and _gp. This is
- * required to keep _gp and ra aligned to 8 byte.
- */
- .align PTRLOG
- bal 1f
- nop
- PTR _gp
-1:
- PTR_L gp, 0(ra)
-
#ifdef CONFIG_MIPS_CM
PTR_LA t9, mips_cm_map
jalr t9
@@ -291,121 +279,3 @@
move ra, zero
END(_start)
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * a0 = addr_sp
- * a1 = gd
- * a2 = destination address
- */
-ENTRY(relocate_code)
- move sp, a0 # set new stack pointer
- move fp, sp
-
- move s0, a1 # save gd in s0
- move s2, a2 # save destination address in s2
-
- PTR_LI t0, CONFIG_SYS_MONITOR_BASE
- PTR_SUB s1, s2, t0 # s1 <-- relocation offset
-
- PTR_LA t2, __image_copy_end
- move t1, a2
-
- /*
- * t0 = source address
- * t1 = target address
- * t2 = source end address
- */
-1:
- PTR_L t3, 0(t0)
- PTR_S t3, 0(t1)
- PTR_ADDU t0, PTRSIZE
- blt t0, t2, 1b
- PTR_ADDU t1, PTRSIZE
-
- /*
- * Now we want to update GOT.
- *
- * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
- * generated by GNU ld. Skip these reserved entries from relocation.
- */
- PTR_LA t3, num_got_entries
- PTR_LA t8, _GLOBAL_OFFSET_TABLE_
- PTR_ADD t8, s1 # t8 now holds relocated _G_O_T_
- PTR_ADDIU t8, t8, 2 * PTRSIZE # skipping first two entries
- PTR_LI t2, 2
-1:
- PTR_L t1, 0(t8)
- beqz t1, 2f
- PTR_ADD t1, s1
- PTR_S t1, 0(t8)
-2:
- PTR_ADDIU t2, 1
- blt t2, t3, 1b
- PTR_ADDIU t8, PTRSIZE
-
- /* Update dynamic relocations */
- PTR_LA t1, __rel_dyn_start
- PTR_LA t2, __rel_dyn_end
-
- b 2f # skip first reserved entry
- PTR_ADDIU t1, 2 * PTRSIZE
-
-1:
- lw t8, -4(t1) # t8 <-- relocation info
-
- PTR_LI t3, MIPS_RELOC
- bne t8, t3, 2f # skip non-MIPS_RELOC entries
- nop
-
- PTR_L t3, -(2 * PTRSIZE)(t1) # t3 <-- location to fix up in FLASH
-
- PTR_L t8, 0(t3) # t8 <-- original pointer
- PTR_ADD t8, s1 # t8 <-- adjusted pointer
-
- PTR_ADD t3, s1 # t3 <-- location to fix up in RAM
- PTR_S t8, 0(t3)
-
-2:
- blt t1, t2, 1b
- PTR_ADDIU t1, 2 * PTRSIZE # each rel.dyn entry is 2*PTRSIZE bytes
-
- /*
- * Flush caches to ensure our newly modified instructions are visible
- * to the instruction cache. We're still running with the old GOT, so
- * apply the reloc offset to the start address.
- */
- PTR_LA a0, __text_start
- PTR_LA a1, __text_end
- PTR_SUB a1, a1, a0
- PTR_LA t9, flush_cache
- jalr t9
- PTR_ADD a0, s1
-
- PTR_ADD gp, s1 # adjust gp
-
- /*
- * Clear BSS
- *
- * GOT is now relocated. Thus __bss_start and __bss_end can be
- * accessed directly via $gp.
- */
- PTR_LA t1, __bss_start # t1 <-- __bss_start
- PTR_LA t2, __bss_end # t2 <-- __bss_end
-
-1:
- PTR_S zero, 0(t1)
- blt t1, t2, 1b
- PTR_ADDIU t1, PTRSIZE
-
- move a0, s0 # a0 <-- gd
- move a1, s2
- PTR_LA t9, board_init_r
- jr t9
- move ra, zero
-
- END(relocate_code)
diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds
index 0129c99..bd5536f 100644
--- a/arch/mips/cpu/u-boot.lds
+++ b/arch/mips/cpu/u-boot.lds
@@ -34,15 +34,6 @@
*(.data*)
}
- . = .;
- _gp = ALIGN(16) + 0x7ff0;
-
- .got : {
- *(.got)
- }
-
- num_got_entries = SIZEOF(.got) >> PTR_COUNT_SHIFT;
-
. = ALIGN(4);
.sdata : {
*(.sdata*)
@@ -57,33 +48,19 @@
__image_copy_end = .;
__init_end = .;
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel.dyn)
- __rel_dyn_end = .;
- }
-
- .padding : {
- /*
- * Workaround for a binutils feature (or bug?).
- *
- * The GNU ld from binutils puts the dynamic relocation
- * entries into the .rel.dyn section. Sometimes it
- * allocates more dynamic relocation entries than it needs
- * and the unused slots are set to R_MIPS_NONE entries.
- *
- * However the size of the .rel.dyn section in the ELF
- * section header does not cover the unused entries, so
- * objcopy removes those during stripping.
- *
- * Create a small section here to avoid that.
- */
- LONG(0xFFFFFFFF)
+ /*
+ * .rel must come last so that the mips-relocs tool can shrink
+ * the section size & the PT_LOAD program header filesz.
+ */
+ .rel : {
+ __rel_start = .;
+ BYTE(0x0)
+ . += (32 * 1024) - 1;
}
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
+ .bss __rel_start (OVERLAY) : {
__bss_start = .;
*(.sbss.*)
*(.bss.*)
diff --git a/arch/mips/include/asm/relocs.h b/arch/mips/include/asm/relocs.h
new file mode 100644
index 0000000..92e9d04
--- /dev/null
+++ b/arch/mips/include/asm/relocs.h
@@ -0,0 +1,24 @@
+/*
+ * MIPS Relocations
+ *
+ * Copyright (c) 2017 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_MIPS_RELOCS_H__
+#define __ASM_MIPS_RELOCS_H__
+
+#define R_MIPS_NONE 0
+#define R_MIPS_32 2
+#define R_MIPS_26 4
+#define R_MIPS_HI16 5
+#define R_MIPS_LO16 6
+#define R_MIPS_PC16 10
+#define R_MIPS_64 18
+#define R_MIPS_HIGHER 28
+#define R_MIPS_HIGHEST 29
+#define R_MIPS_PC21_S2 60
+#define R_MIPS_PC26_S2 61
+
+#endif /* __ASM_MIPS_RELOCS_H__ */
diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h
index fc4640a..b9d2179 100644
--- a/arch/mips/include/asm/sections.h
+++ b/arch/mips/include/asm/sections.h
@@ -8,4 +8,11 @@
#include <asm-generic/sections.h>
+/**
+ * __rel_start: Relocation data generated by the mips-relocs tool
+ *
+ * See arch/mips/lib/reloc.c for details on the format & use of this data.
+ */
+extern uint8_t __rel_start[];
+
#endif
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 659c6ad..ef557c6 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -8,6 +8,7 @@
obj-y += cache.o
obj-y += cache_init.o
obj-y += genex.o
+obj-y += reloc.o
obj-y += stack.o
obj-y += traps.o
diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c
index be87762..2b67905 100644
--- a/arch/mips/lib/bootm.c
+++ b/arch/mips/lib/bootm.c
@@ -279,17 +279,17 @@
boot_reloc_fdt(images);
boot_setup_fdt(images);
} else {
- if (CONFIG_IS_ENABLED(CONFIG_MIPS_BOOT_ENV_LEGACY))
- linux_env_legacy(images);
-
if (CONFIG_IS_ENABLED(MIPS_BOOT_CMDLINE_LEGACY)) {
linux_cmdline_legacy(images);
- if (!CONFIG_IS_ENABLED(CONFIG_MIPS_BOOT_ENV_LEGACY))
+ if (!CONFIG_IS_ENABLED(MIPS_BOOT_ENV_LEGACY))
linux_cmdline_append(images);
linux_cmdline_dump();
}
+
+ if (CONFIG_IS_ENABLED(MIPS_BOOT_ENV_LEGACY))
+ linux_env_legacy(images);
}
}
diff --git a/arch/mips/lib/reloc.c b/arch/mips/lib/reloc.c
new file mode 100644
index 0000000..d0c52c9
--- /dev/null
+++ b/arch/mips/lib/reloc.c
@@ -0,0 +1,164 @@
+/*
+ * MIPS Relocation
+ *
+ * Copyright (c) 2017 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Relocation data, found in the .rel section, is generated by the mips-relocs
+ * tool & contains a record of all locations in the U-Boot binary that need to
+ * be fixed up during relocation.
+ *
+ * The data is a sequence of unsigned integers, which are of somewhat arbitrary
+ * size. This is achieved by encoding integers as a sequence of bytes, each of
+ * which contains 7 bits of data with the most significant bit indicating
+ * whether any further bytes need to be read. The least significant bits of the
+ * integer are found in the first byte - ie. it somewhat resembles little
+ * endian.
+ *
+ * Each pair of two integers represents a relocation that must be applied. The
+ * first integer represents the type of relocation as a standard ELF relocation
+ * type (ie. R_MIPS_*). The second integer represents the offset at which to
+ * apply the relocation, relative to the previous relocation or for the first
+ * relocation the start of the relocated .text section.
+ *
+ * The end of the relocation data is indicated when type R_MIPS_NONE (0) is
+ * read, at which point no further integers should be read. That is, the
+ * terminating R_MIPS_NONE reloc includes no offset.
+ */
+
+#include <common.h>
+#include <asm/relocs.h>
+#include <asm/sections.h>
+
+/**
+ * read_uint() - Read an unsigned integer from the buffer
+ * @buf: pointer to a pointer to the reloc buffer
+ *
+ * Read one whole unsigned integer from the relocation data pointed to by @buf,
+ * advancing @buf past the bytes encoding the integer.
+ *
+ * Returns: the integer read from @buf
+ */
+static unsigned long read_uint(uint8_t **buf)
+{
+ unsigned long val = 0;
+ unsigned int shift = 0;
+ uint8_t new;
+
+ do {
+ new = *(*buf)++;
+ val |= (new & 0x7f) << shift;
+ shift += 7;
+ } while (new & 0x80);
+
+ return val;
+}
+
+/**
+ * apply_reloc() - Apply a single relocation
+ * @type: the type of reloc (R_MIPS_*)
+ * @addr: the address that the reloc should be applied to
+ * @off: the relocation offset, ie. number of bytes we're moving U-Boot by
+ *
+ * Apply a single relocation of type @type at @addr. This function is
+ * intentionally simple, and does the bare minimum needed to fixup the
+ * relocated U-Boot - in particular, it does not check for overflows.
+ */
+static void apply_reloc(unsigned int type, void *addr, long off)
+{
+ uint32_t u32;
+
+ switch (type) {
+ case R_MIPS_26:
+ u32 = *(uint32_t *)addr;
+ u32 = (u32 & GENMASK(31, 26)) |
+ ((u32 + (off >> 2)) & GENMASK(25, 0));
+ *(uint32_t *)addr = u32;
+ break;
+
+ case R_MIPS_32:
+ *(uint32_t *)addr += off;
+ break;
+
+ case R_MIPS_64:
+ *(uint64_t *)addr += off;
+ break;
+
+ case R_MIPS_HI16:
+ *(uint32_t *)addr += off >> 16;
+ break;
+
+ default:
+ panic("Unhandled reloc type %u\n", type);
+ }
+}
+
+/**
+ * relocate_code() - Relocate U-Boot, generally from flash to DDR
+ * @start_addr_sp: new stack pointer
+ * @new_gd: pointer to relocated global data
+ * @relocaddr: the address to relocate to
+ *
+ * Relocate U-Boot from its current location (generally in flash) to a new one
+ * (generally in DDR). This function will copy the U-Boot binary & apply
+ * relocations as necessary, then jump to board_init_r in the new build of
+ * U-Boot. As such, this function does not return.
+ */
+void relocate_code(ulong start_addr_sp, gd_t *new_gd, ulong relocaddr)
+{
+ unsigned long addr, length, bss_len;
+ uint8_t *buf, *bss_start;
+ unsigned int type;
+ long off;
+
+ /*
+ * Ensure that we're relocating by an offset which is a multiple of
+ * 64KiB, ie. doesn't change the least significant 16 bits of any
+ * addresses. This allows us to discard R_MIPS_LO16 relocs, saving
+ * space in the U-Boot binary & complexity in handling them.
+ */
+ off = relocaddr - (unsigned long)__text_start;
+ if (off & 0xffff)
+ panic("Mis-aligned relocation\n");
+
+ /* Copy U-Boot to RAM */
+ length = __image_copy_end - __text_start;
+ memcpy((void *)relocaddr, __text_start, length);
+
+ /* Now apply relocations to the copy in RAM */
+ buf = __rel_start;
+ addr = relocaddr;
+ while (true) {
+ type = read_uint(&buf);
+ if (type == R_MIPS_NONE)
+ break;
+
+ addr += read_uint(&buf) << 2;
+ apply_reloc(type, (void *)addr, off);
+ }
+
+ /* Ensure the icache is coherent */
+ flush_cache(relocaddr, length);
+
+ /* Clear the .bss section */
+ bss_start = (uint8_t *)((unsigned long)__bss_start + off);
+ bss_len = (unsigned long)&__bss_end - (unsigned long)__bss_start;
+ memset(bss_start, 0, bss_len);
+
+ /* Jump to the relocated U-Boot */
+ asm volatile(
+ "move $29, %0\n"
+ " move $4, %1\n"
+ " move $5, %2\n"
+ " move $31, $0\n"
+ " jr %3"
+ : /* no outputs */
+ : "r"(start_addr_sp),
+ "r"(new_gd),
+ "r"(relocaddr),
+ "r"((unsigned long)board_init_r + off));
+
+ /* Since we jumped to the new U-Boot above, we won't get here */
+ unreachable();
+}
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index d99ae27..d2fced8a 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -264,14 +264,14 @@
cmplw r3, r4
bne 1b
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
-#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE
-#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM."
+#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE
+#error "SYS_MALLOC_F_LEN too large to fit into initial RAM."
#endif
/* r3 = new stack pointer / pre-reloc malloc area */
- subi r3, r3, CONFIG_SYS_MALLOC_F_LEN
+ subi r3, r3, CONFIG_VAL(SYS_MALLOC_F_LEN)
/* Set pointer to pre-reloc malloc area in GD */
stw r3, GD_MALLOC_BASE(r4)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index f03e1a0..0f016f0 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1183,14 +1183,13 @@
lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h
ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */
-#ifdef CONFIG_SYS_MALLOC_F_LEN
-
-#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE
-#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM."
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE
+#error "SYS_MALLOC_F_LEN too large to fit into initial RAM."
#endif
/* Leave 16+ byte for back chain termination and NULL return address */
- subi r3,r3,((CONFIG_SYS_MALLOC_F_LEN+16+15)&~0xf)
+ subi r3,r3,((CONFIG_VAL(SYS_MALLOC_F_LEN)+16+15)&~0xf)
#endif
/* End of RAM */
@@ -1204,7 +1203,7 @@
cmplw r4,r3
bne 1b
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h
ori r4,r4,(CONFIG_SYS_GBL_DATA_OFFSET)@l
diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c
index 7243bfc..22d6aab 100644
--- a/arch/sandbox/cpu/os.c
+++ b/arch/sandbox/cpu/os.c
@@ -413,17 +413,6 @@
return 0;
}
-void os_putc(int ch)
-{
- putchar(ch);
-}
-
-void os_puts(const char *str)
-{
- while (*str)
- os_putc(*str++);
-}
-
int os_write_ram_buf(const char *fname)
{
struct sandbox_state *state = state_get_current();
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c
index f605d4d..00742fd 100644
--- a/arch/sandbox/cpu/start.c
+++ b/arch/sandbox/cpu/start.c
@@ -310,7 +310,7 @@
memset(&data, '\0', sizeof(data));
gd = &data;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
gd->malloc_base = CONFIG_MALLOC_F_ADDR;
#endif
setup_ram_buf(state);
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index 4c0a8fe..a0ad03c 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -272,6 +272,9 @@
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
+#ifdef CONFIG_USB_XHCI_HCD
+ fsp,enable-xhci;
+#endif
fsp,lpe-mode = <LPE_MODE_PCI>;
fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
diff --git a/board/cei/cei-tk1-som/cei-tk1-som.c b/board/cei/cei-tk1-som/cei-tk1-som.c
index 9ba7490..7c87bd1 100644
--- a/board/cei/cei-tk1-som/cei-tk1-som.c
+++ b/board/cei/cei-tk1-som/cei-tk1-som.c
@@ -39,6 +39,7 @@
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
+/* TODO: Convert to driver model
struct udevice *pmic;
int err;
@@ -59,6 +60,7 @@
error("failed to set SD4 voltage: %d\n", err);
return err;
}
+*/
return 0;
}
diff --git a/board/nvidia/jetson-tk1/jetson-tk1.c b/board/nvidia/jetson-tk1/jetson-tk1.c
index a66b710..bd08a2e 100644
--- a/board/nvidia/jetson-tk1/jetson-tk1.c
+++ b/board/nvidia/jetson-tk1/jetson-tk1.c
@@ -6,7 +6,9 @@
*/
#include <common.h>
+#include <dm.h>
#include <power/as3722.h>
+#include <power/pmic.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
@@ -37,27 +39,45 @@
}
#ifdef CONFIG_PCI_TEGRA
-int tegra_pcie_board_init(void)
+/* TODO: Convert to driver model */
+static int as3722_sd_enable(struct udevice *pmic, unsigned int sd)
{
- struct udevice *pmic;
int err;
- err = as3722_init(&pmic);
+ if (sd > 6)
+ return -EINVAL;
+
+ err = pmic_clrsetbits(pmic, AS3722_SD_CONTROL, 0, 1 << sd);
if (err) {
- error("failed to initialize AS3722 PMIC: %d\n", err);
+ error("failed to update SD control register: %d", err);
return err;
}
- err = as3722_sd_enable(pmic, 4);
- if (err < 0) {
- error("failed to enable SD4: %d\n", err);
- return err;
+ return 0;
+}
+
+int tegra_pcie_board_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_PMIC,
+ DM_GET_DRIVER(pmic_as3722), &dev);
+ if (ret) {
+ debug("%s: Failed to find PMIC\n", __func__);
+ return ret;
}
- err = as3722_sd_set_voltage(pmic, 4, 0x24);
- if (err < 0) {
- error("failed to set SD4 voltage: %d\n", err);
- return err;
+ ret = as3722_sd_enable(dev, 4);
+ if (ret < 0) {
+ error("failed to enable SD4: %d\n", ret);
+ return ret;
+ }
+
+ ret = as3722_sd_set_voltage(dev, 4, 0x24);
+ if (ret < 0) {
+ error("failed to set SD4 voltage: %d\n", ret);
+ return ret;
}
return 0;
diff --git a/board/nvidia/nyan-big/nyan-big.c b/board/nvidia/nyan-big/nyan-big.c
index 8f68ae9..54acf54 100644
--- a/board/nvidia/nyan-big/nyan-big.c
+++ b/board/nvidia/nyan-big/nyan-big.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
@@ -46,20 +47,23 @@
int tegra_lcd_pmic_init(int board_id)
{
- struct udevice *pmic;
+ struct udevice *dev;
int ret;
- ret = as3722_get(&pmic);
- if (ret)
- return -ENOENT;
+ ret = uclass_get_device_by_driver(UCLASS_PMIC,
+ DM_GET_DRIVER(pmic_as3722), &dev);
+ if (ret) {
+ debug("%s: Failed to find PMIC\n", __func__);
+ return ret;
+ }
if (board_id == 0)
- as3722_write(pmic, 0x00, 0x3c);
+ pmic_reg_write(dev, 0x00, 0x3c);
else
- as3722_write(pmic, 0x00, 0x50);
- as3722_write(pmic, 0x12, 0x10);
- as3722_write(pmic, 0x0c, 0x07);
- as3722_write(pmic, 0x20, 0x10);
+ pmic_reg_write(dev, 0x00, 0x50);
+ pmic_reg_write(dev, 0x12, 0x10);
+ pmic_reg_write(dev, 0x0c, 0x07);
+ pmic_reg_write(dev, 0x20, 0x10);
return 0;
}
diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index fc4c60c..f31768e 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -13,8 +13,6 @@
#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/fmc.h>
-#include <dm/platform_data/serial_stm32x7.h>
#include <asm/arch/stm32_periph.h>
#include <asm/arch/stm32_defs.h>
#include <asm/arch/syscfg.h>
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 36e9cd7..9347329 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -9,20 +9,11 @@
#include <ram.h>
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
-#include <misc.h>
#include <asm/setup.h>
#include <asm/arch/periph.h>
#include <power/regulator.h>
#include <u-boot/sha256.h>
-#define RK3399_CPUID_OFF 0x7
-#define RK3399_CPUID_LEN 0x10
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define RK3399_CPUID_OFF 0x7
-#define RK3399_CPUID_LEN 0x10
-
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
@@ -107,11 +98,14 @@
static void setup_serial(void)
{
#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
+ const u32 cpuid_offset = 0x7;
+ const u32 cpuid_length = 0x10;
+
struct udevice *dev;
int ret, i;
- u8 cpuid[RK3399_CPUID_LEN];
- u8 low[RK3399_CPUID_LEN/2], high[RK3399_CPUID_LEN/2];
- char cpuid_str[RK3399_CPUID_LEN * 2 + 1];
+ u8 cpuid[cpuid_length];
+ u8 low[cpuid_length/2], high[cpuid_length/2];
+ char cpuid_str[cpuid_length * 2 + 1];
u64 serialno;
char serialno_str[16];
@@ -124,7 +118,7 @@
}
/* read the cpu_id range from the efuses */
- ret = misc_read(dev, RK3399_CPUID_OFF, &cpuid, sizeof(cpuid));
+ ret = misc_read(dev, cpuid_offset, &cpuid, sizeof(cpuid));
if (ret) {
debug("%s: reading cpuid from the efuses failed\n",
__func__);
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index bf8c8e1..00a31a97 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -36,11 +36,13 @@
#define board_is_x15() board_ti_is("BBRDX15_")
#define board_is_x15_revb1() (board_ti_is("BBRDX15_") && \
- (strncmp("B.10", board_ti_get_rev(), 3) <= 0))
+ !strncmp("B.10", board_ti_get_rev(), 3))
+#define board_is_x15_revc() (board_ti_is("BBRDX15_") && \
+ !strncmp("C.00", board_ti_get_rev(), 3))
#define board_is_am572x_evm() board_ti_is("AM572PM_")
#define board_is_am572x_evm_reva3() \
(board_ti_is("AM572PM_") && \
- (strncmp("A.30", board_ti_get_rev(), 3) <= 0))
+ !strncmp("A.30", board_ti_get_rev(), 3))
#define board_is_am572x_idk() board_ti_is("AM572IDK")
#define board_is_am571x_idk() board_ti_is("AM571IDK")
@@ -474,6 +476,8 @@
if (board_is_x15()) {
if (board_is_x15_revb1())
name = "beagle_x15_revb1";
+ else if (board_is_x15_revc())
+ name = "beagle_x15_revc";
else
name = "beagle_x15";
} else if (board_is_am572x_evm()) {
@@ -683,7 +687,8 @@
/* Now do the weird minor deltas that should be safe */
if (board_is_x15() || board_is_am572x_evm()) {
- if (board_is_x15_revb1() || board_is_am572x_evm_reva3()) {
+ if (board_is_x15_revb1() || board_is_am572x_evm_reva3() ||
+ board_is_x15_revc()) {
pconf = core_padconf_array_delta_x15_sr2_0;
pconf_sz = ARRAY_SIZE(core_padconf_array_delta_x15_sr2_0);
} else {
diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c
index c7e519c..5de61e7 100644
--- a/board/toradex/apalis-tk1/apalis-tk1.c
+++ b/board/toradex/apalis-tk1/apalis-tk1.c
@@ -61,6 +61,7 @@
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
+ /* TODO: Convert to driver model
struct udevice *pmic;
int err;
@@ -94,6 +95,7 @@
error("failed to set GPIO#2 high: %d\n", err);
return err;
}
+ */
/* Reset I210 Gigabit Ethernet Controller */
gpio_request(LAN_RESET_N, "LAN_RESET_N");
@@ -110,6 +112,7 @@
gpio_direction_output(TEGRA_GPIO(O, 6), 0);
/* Make sure LDO9 and LDO10 are initially enabled @ 0V */
+ /* TODO: Convert to driver model
err = as3722_ldo_enable(pmic, 9);
if (err < 0) {
error("failed to enable LDO9: %d\n", err);
@@ -130,6 +133,7 @@
error("failed to set LDO10 voltage: %d\n", err);
return err;
}
+ */
mdelay(100);
@@ -137,6 +141,7 @@
gpio_set_value(TEGRA_GPIO(O, 6), 1);
/* Enable LDO9 and LDO10 for +V3.3_ETH on patched prototypes */
+ /* TODO: Convert to driver model
err = as3722_ldo_set_voltage(pmic, 9, 0xff);
if (err < 0) {
error("failed to set LDO9 voltage: %d\n", err);
@@ -147,6 +152,7 @@
error("failed to set LDO10 voltage: %d\n", err);
return err;
}
+ */
mdelay(100);
gpio_set_value(LAN_RESET_N, 1);
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 8971697..81ac78d 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -344,9 +344,9 @@
#ifdef CONFIG_BOARD_TYPES
printf("Board Type = %ld\n", gd->board_type);
#endif
-#ifdef CONFIG_SYS_MALLOC_F
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
- CONFIG_SYS_MALLOC_F_LEN);
+ CONFIG_VAL(SYS_MALLOC_F_LEN));
#endif
if (gd->fdt_blob)
printf("fdt_blob = %p\n", gd->fdt_blob);
diff --git a/cmd/scsi.c b/cmd/scsi.c
index 5709718..8e36de1 100644
--- a/cmd/scsi.c
+++ b/cmd/scsi.c
@@ -36,7 +36,9 @@
case 2:
if (strncmp(argv[1], "res", 3) == 0) {
printf("\nReset SCSI\n");
+#ifndef CONFIG_DM_SCSI
scsi_bus_reset(NULL);
+#endif
ret = scsi_scan(true);
if (ret)
return CMD_RET_FAILURE;
diff --git a/cmd/usb.c b/cmd/usb.c
index 4fa456e..992d414 100644
--- a/cmd/usb.c
+++ b/cmd/usb.c
@@ -150,6 +150,8 @@
static void usb_display_desc(struct usb_device *dev)
{
+ uint packet_size = dev->descriptor.bMaxPacketSize0;
+
if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) {
printf("%d: %s, USB Revision %x.%x\n", dev->devnum,
usb_get_class_desc(dev->config.if_desc[0].desc.bInterfaceClass),
@@ -171,9 +173,10 @@
usb_get_class_desc(
dev->config.if_desc[0].desc.bInterfaceClass));
}
+ if (dev->descriptor.bcdUSB >= cpu_to_le16(0x0300))
+ packet_size = 1 << packet_size;
printf(" - PacketSize: %d Configurations: %d\n",
- dev->descriptor.bMaxPacketSize0,
- dev->descriptor.bNumConfigurations);
+ packet_size, dev->descriptor.bNumConfigurations);
printf(" - Vendor: 0x%04x Product 0x%04x Version %d.%d\n",
dev->descriptor.idVendor, dev->descriptor.idProduct,
(dev->descriptor.bcdDevice>>8) & 0xff,
diff --git a/common/Makefile b/common/Makefile
index 17a92ea..60681c8 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -139,9 +139,11 @@
endif
obj-$(CONFIG_CROS_EC) += cros_ec.o
obj-y += dlmalloc.o
-ifdef CONFIG_SYS_MALLOC_F_LEN
+ifdef CONFIG_SYS_MALLOC_F
+ifneq ($(CONFIG_$(SPL_)SYS_MALLOC_F_LEN),0)
obj-y += malloc_simple.o
endif
+endif
obj-y += image.o
obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o
diff --git a/common/board_f.c b/common/board_f.c
index ffa84e3..19b8055 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -418,7 +418,7 @@
*/
gd->relocaddr -= gd->mon_len;
gd->relocaddr &= ~(4096 - 1);
-#ifdef CONFIG_E500
+#if defined(CONFIG_E500) || defined(CONFIG_MIPS)
/* round down to next 64 kB limit so that IVPR stays aligned */
gd->relocaddr &= ~(65536 - 1);
#endif
@@ -727,7 +727,7 @@
static int initf_console_record(void)
{
-#if defined(CONFIG_CONSOLE_RECORD) && defined(CONFIG_SYS_MALLOC_F_LEN)
+#if defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN)
return console_record_init();
#else
return 0;
@@ -736,7 +736,7 @@
static int initf_dm(void)
{
-#if defined(CONFIG_DM) && defined(CONFIG_SYS_MALLOC_F_LEN)
+#if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN)
int ret;
bootstage_start(BOOTSTATE_ID_ACCUM_DM_F, "dm_f");
diff --git a/common/board_r.c b/common/board_r.c
index ecca1ed..985aa95 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -256,7 +256,7 @@
{
ulong malloc_start;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif
diff --git a/common/console.c b/common/console.c
index c6156f3..01eef55 100644
--- a/common/console.c
+++ b/common/console.c
@@ -426,12 +426,6 @@
unmap_sysmem(buffer);
}
-static void pre_console_puts(const char *s)
-{
- while (*s)
- pre_console_putc(*s++);
-}
-
static void print_pre_console_buffer(int flushpoint)
{
unsigned long in = 0, out = 0;
@@ -459,7 +453,6 @@
}
#else
static inline void pre_console_putc(const char c) {}
-static inline void pre_console_puts(const char *s) {}
static inline void print_pre_console_buffer(int flushpoint) {}
#endif
@@ -501,41 +494,8 @@
void puts(const char *s)
{
-#ifdef CONFIG_DEBUG_UART
- if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) {
- while (*s) {
- int ch = *s++;
-
- printch(ch);
- }
- return;
- }
-#endif
-#ifdef CONFIG_CONSOLE_RECORD
- if (gd && (gd->flags & GD_FLG_RECORD) && gd->console_out.start)
- membuff_put(&gd->console_out, s, strlen(s));
-#endif
-#ifdef CONFIG_SILENT_CONSOLE
- if (gd->flags & GD_FLG_SILENT)
- return;
-#endif
-
-#ifdef CONFIG_DISABLE_CONSOLE
- if (gd->flags & GD_FLG_DISABLE_CONSOLE)
- return;
-#endif
-
- if (!gd->have_console)
- return pre_console_puts(s);
-
- if (gd->flags & GD_FLG_DEVINIT) {
- /* Send to the standard output */
- fputs(stdout, s);
- } else {
- /* Send directly to the handler */
- pre_console_puts(s);
- serial_puts(s);
- }
+ while (*s)
+ putc(*s++);
}
#ifdef CONFIG_CONSOLE_RECORD
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index fc1e8b3..c37979b 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -1254,7 +1254,7 @@
INTERNAL_SIZE_T nb;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return malloc_simple(bytes);
#endif
@@ -1522,7 +1522,7 @@
mchunkptr fwd; /* misc temp for linking */
int islr; /* track whether merging with last_remainder */
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/* free() is a no-op - all the memory will be freed on relocation */
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT))
return;
@@ -1679,7 +1679,7 @@
/* realloc of null is supposed to be same as malloc */
if (oldmem == NULL) return mALLOc(bytes);
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
/* This is harder to support and should not be needed */
panic("pre-reloc realloc() is not supported");
@@ -2074,7 +2074,7 @@
return NULL;
else
{
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
MALLOC_ZERO(mem, sz);
return mem;
@@ -2375,9 +2375,9 @@
int initf_malloc(void)
{
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
assert(gd->malloc_base); /* Set up by crt0.S */
- gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
#endif
diff --git a/common/init/board_init.c b/common/init/board_init.c
index bf4255b..4a391be 100644
--- a/common/init/board_init.c
+++ b/common/init/board_init.c
@@ -46,8 +46,8 @@
ulong board_init_f_alloc_reserve(ulong top)
{
/* Reserve early malloc arena */
-#if defined(CONFIG_SYS_MALLOC_F)
- top -= CONFIG_SYS_MALLOC_F_LEN;
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+ top -= CONFIG_VAL(SYS_MALLOC_F_LEN);
#endif
/* LAST : reserve GD (rounded up to a multiple of 16 bytes) */
top = rounddown(top-sizeof(struct global_data), 16);
@@ -121,11 +121,11 @@
* Use gd as it is now properly set for all architectures.
*/
-#if defined(CONFIG_SYS_MALLOC_F)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/* go down one 'early malloc arena' */
gd->malloc_base = base;
/* next alloc will be higher by one 'early malloc arena' size */
- base += CONFIG_SYS_MALLOC_F_LEN;
+ base += CONFIG_VAL(SYS_MALLOC_F_LEN);
#endif
}
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 7f3fd92..c56cc6f 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -220,12 +220,12 @@
debug("spl_early_init()\n");
-#if defined(CONFIG_SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (setup_malloc) {
#ifdef CONFIG_MALLOC_F_ADDR
gd->malloc_base = CONFIG_MALLOC_F_ADDR;
#endif
- gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
}
#endif
@@ -419,7 +419,7 @@
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
-#if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif
@@ -486,7 +486,7 @@
gd_t *new_gd;
ulong ptr = CONFIG_SPL_STACK_R_ADDR;
-#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
+#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SPL_SYS_MALLOC_F_LEN
if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) {
ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
gd->malloc_base = ptr;
diff --git a/common/usb_hub.c b/common/usb_hub.c
index d135526..70bc6e2 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -55,9 +55,6 @@
struct list_head list;
};
-/* TODO(sjg@chromium.org): Remove this when CONFIG_DM_USB is defined */
-static struct usb_hub_device hub_dev[USB_MAX_HUB];
-static int usb_hub_index;
static LIST_HEAD(usb_scan_list);
__weak void usb_hub_reset_devices(int port)
@@ -65,11 +62,41 @@
return;
}
+static inline bool usb_hub_is_superspeed(struct usb_device *hdev)
+{
+ return hdev->descriptor.bDeviceProtocol == 3;
+}
+
+#ifdef CONFIG_DM_USB
+bool usb_hub_is_root_hub(struct udevice *hub)
+{
+ if (device_get_uclass_id(hub->parent) != UCLASS_USB_HUB)
+ return true;
+
+ return false;
+}
+
+static int usb_set_hub_depth(struct usb_device *dev, int depth)
+{
+ if (depth < 0 || depth > 4)
+ return -EINVAL;
+
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ USB_REQ_SET_HUB_DEPTH, USB_DIR_OUT | USB_RT_HUB,
+ depth, 0, NULL, 0, USB_CNTL_TIMEOUT);
+}
+#endif
+
static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
{
+ unsigned short dtype = USB_DT_HUB;
+
+ if (usb_hub_is_superspeed(dev))
+ dtype = USB_DT_SS_HUB;
+
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
- USB_DT_HUB << 8, 0, data, size, USB_CNTL_TIMEOUT);
+ dtype << 8, 0, data, size, USB_CNTL_TIMEOUT);
}
static int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
@@ -95,9 +122,40 @@
int usb_get_port_status(struct usb_device *dev, int port, void *data)
{
- return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ int ret;
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
- data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
+ data, sizeof(struct usb_port_status), USB_CNTL_TIMEOUT);
+
+#ifdef CONFIG_DM_USB
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Translate the USB 3.0 hub port status field into the old version
+ * that U-Boot understands. Do this only when the hub is not root hub.
+ * For root hub, the port status field has already been translated
+ * in the host controller driver (see xhci_submit_root() in xhci.c).
+ *
+ * Note: this only supports driver model.
+ */
+
+ if (!usb_hub_is_root_hub(dev->dev) && usb_hub_is_superspeed(dev)) {
+ struct usb_port_status *status = (struct usb_port_status *)data;
+ u16 tmp = (status->wPortStatus) & USB_SS_PORT_STAT_MASK;
+
+ if (status->wPortStatus & USB_SS_PORT_STAT_POWER)
+ tmp |= USB_PORT_STAT_POWER;
+ if ((status->wPortStatus & USB_SS_PORT_STAT_SPEED) ==
+ USB_SS_PORT_STAT_SPEED_5GBPS)
+ tmp |= USB_PORT_STAT_SUPER_SPEED;
+
+ status->wPortStatus = tmp;
+ }
+#endif
+
+ return ret;
}
@@ -154,6 +212,10 @@
max(100, (int)pgood_delay) + 1000);
}
+#ifndef CONFIG_DM_USB
+static struct usb_hub_device hub_dev[USB_MAX_HUB];
+static int usb_hub_index;
+
void usb_hub_reset(void)
{
usb_hub_index = 0;
@@ -170,6 +232,7 @@
printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
return NULL;
}
+#endif
#define MAX_TRIES 5
@@ -195,8 +258,18 @@
return speed_str;
}
-int legacy_hub_port_reset(struct usb_device *dev, int port,
- unsigned short *portstat)
+/**
+ * usb_hub_port_reset() - reset a port given its usb_device pointer
+ *
+ * Reset a hub port and see if a device is present on that port, providing
+ * sufficient time for it to show itself. The port status is returned.
+ *
+ * @dev: USB device to reset
+ * @port: Port number to reset (note ports are numbered from 0 here)
+ * @portstat: Returns port status
+ */
+static int usb_hub_port_reset(struct usb_device *dev, int port,
+ unsigned short *portstat)
{
int err, tries;
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
@@ -269,15 +342,6 @@
return 0;
}
-#ifdef CONFIG_DM_USB
-int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat)
-{
- struct usb_device *udev = dev_get_parent_priv(dev);
-
- return legacy_hub_port_reset(udev, port, portstat);
-}
-#endif
-
int usb_hub_port_connect_change(struct usb_device *dev, int port)
{
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
@@ -311,7 +375,7 @@
}
/* Reset the port */
- ret = legacy_hub_port_reset(dev, port, &portstatus);
+ ret = usb_hub_port_reset(dev, port, &portstatus);
if (ret < 0) {
if (ret != -ENXIO)
printf("cannot reset port %i!?\n", port + 1);
@@ -405,8 +469,15 @@
portchange = le16_to_cpu(portsts->wPortChange);
debug("Port %d Status %X Change %X\n", i + 1, portstatus, portchange);
- /* No connection change happened, wait a bit more. */
- if (!(portchange & USB_PORT_STAT_C_CONNECTION)) {
+ /*
+ * No connection change happened, wait a bit more.
+ *
+ * For some situation, the hub reports no connection change but a
+ * device is connected to the port (eg: CCS bit is set but CSC is not
+ * in the PORTSC register of a root hub), ignore such case.
+ */
+ if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
+ !(portstatus & USB_PORT_STAT_CONNECTION)) {
if (get_timer(0) >= hub->connect_timeout) {
debug("devnum=%d port=%d: timeout\n",
dev->devnum, i + 1);
@@ -418,10 +489,6 @@
return 0;
}
- /* Test if the connection came up, and if not exit */
- if (!(portstatus & USB_PORT_STAT_CONNECTION))
- return 0;
-
/* A new USB device is ready at this point */
debug("devnum=%d port=%d: USB dev found\n", dev->devnum, i + 1);
@@ -530,6 +597,20 @@
return ret;
}
+static struct usb_hub_device *usb_get_hub_device(struct usb_device *dev)
+{
+ struct usb_hub_device *hub;
+
+#ifndef CONFIG_DM_USB
+ /* "allocate" Hub device */
+ hub = usb_hub_allocate();
+#else
+ hub = dev_get_uclass_priv(dev->dev);
+#endif
+
+ return hub;
+}
+
static int usb_hub_configure(struct usb_device *dev)
{
int i, length;
@@ -541,11 +622,11 @@
__maybe_unused struct usb_hub_status *hubsts;
int ret;
- /* "allocate" Hub device */
- hub = usb_hub_allocate();
+ hub = usb_get_hub_device(dev);
if (hub == NULL)
return -ENOMEM;
hub->pusb_dev = dev;
+
/* Get the the hub descriptor */
ret = usb_get_hub_descriptor(dev, buffer, 4);
if (ret < 0) {
@@ -570,17 +651,19 @@
&descriptor->wHubCharacteristics)),
&hub->desc.wHubCharacteristics);
/* set the bitmap */
- bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
+ bitmap = (unsigned char *)&hub->desc.u.hs.DeviceRemovable[0];
/* devices not removable by default */
memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
- bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0];
+ bitmap = (unsigned char *)&hub->desc.u.hs.PortPowerCtrlMask[0];
memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
- hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i];
+ hub->desc.u.hs.DeviceRemovable[i] =
+ descriptor->u.hs.DeviceRemovable[i];
for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
- hub->desc.PortPowerCtrlMask[i] = descriptor->PortPowerCtrlMask[i];
+ hub->desc.u.hs.PortPowerCtrlMask[i] =
+ descriptor->u.hs.PortPowerCtrlMask[i];
dev->maxchild = descriptor->bNbrPorts;
debug("%d ports detected\n", dev->maxchild);
@@ -617,6 +700,56 @@
break;
}
+ switch (dev->descriptor.bDeviceProtocol) {
+ case USB_HUB_PR_FS:
+ break;
+ case USB_HUB_PR_HS_SINGLE_TT:
+ debug("Single TT\n");
+ break;
+ case USB_HUB_PR_HS_MULTI_TT:
+ ret = usb_set_interface(dev, 0, 1);
+ if (ret == 0) {
+ debug("TT per port\n");
+ hub->tt.multi = true;
+ } else {
+ debug("Using single TT (err %d)\n", ret);
+ }
+ break;
+ case USB_HUB_PR_SS:
+ /* USB 3.0 hubs don't have a TT */
+ break;
+ default:
+ debug("Unrecognized hub protocol %d\n",
+ dev->descriptor.bDeviceProtocol);
+ break;
+ }
+
+ /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
+ switch (hubCharacteristics & HUB_CHAR_TTTT) {
+ case HUB_TTTT_8_BITS:
+ if (dev->descriptor.bDeviceProtocol != 0) {
+ hub->tt.think_time = 666;
+ debug("TT requires at most %d FS bit times (%d ns)\n",
+ 8, hub->tt.think_time);
+ }
+ break;
+ case HUB_TTTT_16_BITS:
+ hub->tt.think_time = 666 * 2;
+ debug("TT requires at most %d FS bit times (%d ns)\n",
+ 16, hub->tt.think_time);
+ break;
+ case HUB_TTTT_24_BITS:
+ hub->tt.think_time = 666 * 3;
+ debug("TT requires at most %d FS bit times (%d ns)\n",
+ 24, hub->tt.think_time);
+ break;
+ case HUB_TTTT_32_BITS:
+ hub->tt.think_time = 666 * 4;
+ debug("TT requires at most %d FS bit times (%d ns)\n",
+ 32, hub->tt.think_time);
+ break;
+ }
+
debug("power on to power good time: %dms\n",
descriptor->bPwrOn2PwrGood * 2);
debug("hub controller current requirement: %dmA\n",
@@ -624,7 +757,7 @@
for (i = 0; i < dev->maxchild; i++)
debug("port %d is%s removable\n", i + 1,
- hub->desc.DeviceRemovable[(i + 1) / 8] & \
+ hub->desc.u.hs.DeviceRemovable[(i + 1) / 8] & \
(1 << ((i + 1) % 8)) ? " not" : "");
if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
@@ -653,6 +786,59 @@
debug("%sover-current condition exists\n",
(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
"" : "no ");
+
+#ifdef CONFIG_DM_USB
+ /*
+ * Update USB host controller's internal representation of this hub
+ * after the hub descriptor is fetched.
+ */
+ ret = usb_update_hub_device(dev);
+ if (ret < 0 && ret != -ENOSYS) {
+ debug("%s: failed to update hub device for HCD (%x)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /*
+ * A maximum of seven tiers are allowed in a USB topology, and the
+ * root hub occupies the first tier. The last tier ends with a normal
+ * USB device. USB 3.0 hubs use a 20-bit field called 'route string'
+ * to route packets to the designated downstream port. The hub uses a
+ * hub depth value multiplied by four as an offset into the 'route
+ * string' to locate the bits it uses to determine the downstream
+ * port number.
+ */
+ if (usb_hub_is_root_hub(dev->dev)) {
+ hub->hub_depth = -1;
+ } else {
+ struct udevice *hdev;
+ int depth = 0;
+
+ hdev = dev->dev->parent;
+ while (!usb_hub_is_root_hub(hdev)) {
+ depth++;
+ hdev = hdev->parent;
+ }
+
+ hub->hub_depth = depth;
+
+ if (usb_hub_is_superspeed(dev)) {
+ debug("set hub (%p) depth to %d\n", dev, depth);
+ /*
+ * This request sets the value that the hub uses to
+ * determine the index into the 'route string index'
+ * for this hub.
+ */
+ ret = usb_set_hub_depth(dev, depth);
+ if (ret < 0) {
+ debug("%s: failed to set hub depth (%lX)\n",
+ __func__, dev->status);
+ return ret;
+ }
+ }
+ }
+#endif
+
usb_hub_power_on(hub);
/*
@@ -777,6 +963,7 @@
.child_pre_probe = usb_child_pre_probe,
.per_child_auto_alloc_size = sizeof(struct usb_device),
.per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
+ .per_device_auto_alloc_size = sizeof(struct usb_hub_device),
};
static const struct usb_device_id hub_id_table[] = {
diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig
index 9179aaf..ccff112 100644
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@@ -32,7 +32,10 @@
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_TEGRA=y
+CONFIG_DM_PMIC=y
CONFIG_PMIC_AS3722=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_AS3722=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig
index 71d6cd5..10fd50d 100644
--- a/configs/beaver_defconfig
+++ b/configs/beaver_defconfig
@@ -25,6 +25,7 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_LIVE=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig
index 1a5e47d..5623bbf 100644
--- a/configs/cei-tk1-som_defconfig
+++ b/configs/cei-tk1-som_defconfig
@@ -36,7 +36,10 @@
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_TEGRA=y
+CONFIG_DM_PMIC=y
CONFIG_PMIC_AS3722=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_AS3722=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA114_SPI=y
CONFIG_USB=y
diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig
index 8d73f88..7ba75fd 100644
--- a/configs/evb-rk3036_defconfig
+++ b/configs/evb-rk3036_defconfig
@@ -1,9 +1,13 @@
CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ROCKCHIP_RK3036=y
CONFIG_TARGET_EVB_RK3036=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x0
CONFIG_DEBUG_UART=y
CONFIG_ENV_IS_NOWHERE=y
# CONFIG_DISPLAY_CPUINFO is not set
@@ -31,10 +35,11 @@
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RK3036=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
+# CONFIG_SPL_DM_SERIAL is not set
CONFIG_DEBUG_UART_BASE=0x20068000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
+CONFIG_SPL_TINY_MEMSET=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig
index 3b605f4..1438f75 100644
--- a/configs/firefly-rk3288_defconfig
+++ b/configs/firefly-rk3288_defconfig
@@ -76,3 +76,7 @@
CONFIG_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL=y
+CONFIG_SYS_STDIO_DEREGISTER=y
diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig
index 65a5832..a533c64 100644
--- a/configs/jetson-tk1_defconfig
+++ b/configs/jetson-tk1_defconfig
@@ -25,6 +25,7 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_LIVE=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
@@ -36,7 +37,10 @@
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_TEGRA=y
+CONFIG_DM_PMIC=y
CONFIG_PMIC_AS3722=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_AS3722=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA114_SPI=y
CONFIG_USB=y
diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig
index c0faf85..e725e10 100644
--- a/configs/kylin-rk3036_defconfig
+++ b/configs/kylin-rk3036_defconfig
@@ -1,10 +1,14 @@
CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ROCKCHIP_RK3036=y
CONFIG_TARGET_KYLIN_RK3036=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x0
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
# CONFIG_CMD_IMLS is not set
@@ -20,7 +24,6 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
@@ -32,9 +35,11 @@
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RK3036=y
CONFIG_DM_REGULATOR_FIXED=y
+# CONFIG_SPL_DM_SERIAL is not set
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_STORAGE=y
+CONFIG_SPL_TINY_MEMSET=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig
index 81e8253..d058753 100644
--- a/configs/minnowmax_defconfig
+++ b/configs/minnowmax_defconfig
@@ -69,6 +69,7 @@
CONFIG_TIMER=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_DM_VIDEO=y
diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig
index 8183856..03d83c1 100644
--- a/configs/nyan-big_defconfig
+++ b/configs/nyan-big_defconfig
@@ -38,6 +38,7 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_LIVE=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
@@ -50,6 +51,7 @@
CONFIG_DM_PMIC=y
CONFIG_PMIC_AS3722=y
CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_AS3722=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_PWM_TEGRA=y
CONFIG_DEBUG_UART_BASE=0x70006000
diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
index e03e017..121dcf2 100644
--- a/configs/odroid-c2_defconfig
+++ b/configs/odroid-c2_defconfig
@@ -14,9 +14,11 @@
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig
index d04f052..4345fb0 100644
--- a/configs/p2371-2180_defconfig
+++ b/configs/p2371-2180_defconfig
@@ -22,6 +22,7 @@
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_LIVE=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
diff --git a/configs/uniphier_ld11_defconfig b/configs/uniphier_ld11_defconfig
deleted file mode 100644
index 9601dcc..0000000
--- a/configs/uniphier_ld11_defconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_ARCH_UNIPHIER_LD11_SINGLE=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld11-ref"
-# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
-CONFIG_SPL=y
-CONFIG_SPL_NOR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CONFIG=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_FAT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_GPIO_UNIPHIER=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_SDMA=y
-CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/uniphier_ld20_defconfig b/configs/uniphier_ld20_defconfig
deleted file mode 100644
index b5255a6..0000000
--- a/configs/uniphier_ld20_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_ARCH_UNIPHIER_LD20_SINGLE=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
-# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
-CONFIG_SPL=y
-CONFIG_SPL_NOR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CONFIG=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_FAT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_GPIO_UNIPHIER=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_MMC_UNIPHIER=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
index 2685432..c3b1234 100644
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@@ -29,6 +29,7 @@
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/uniphier_pro4_defconfig b/configs/uniphier_pro4_defconfig
index a00e583..72bd99a 100644
--- a/configs/uniphier_pro4_defconfig
+++ b/configs/uniphier_pro4_defconfig
@@ -28,6 +28,7 @@
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/uniphier_pxs2_ld6b_defconfig b/configs/uniphier_pxs2_ld6b_defconfig
index d4af18a..a409872 100644
--- a/configs/uniphier_pxs2_ld6b_defconfig
+++ b/configs/uniphier_pxs2_ld6b_defconfig
@@ -29,6 +29,7 @@
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/uniphier_sld3_defconfig b/configs/uniphier_sld3_defconfig
index 0f810ee..b9d89ef 100644
--- a/configs/uniphier_sld3_defconfig
+++ b/configs/uniphier_sld3_defconfig
@@ -29,6 +29,7 @@
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig
index 73bdaa8..d71b8b7 100644
--- a/configs/uniphier_v8_defconfig
+++ b/configs/uniphier_v8_defconfig
@@ -23,6 +23,7 @@
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_MISC=y
diff --git a/doc/README.uniphier b/doc/README.uniphier
index f79659c..f21c9d0 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -5,7 +5,7 @@
Recommended toolchains
----------------------
-The UniPhir platform is well tested with Linaro toolchanis.
+The UniPhier platform is well tested with Linaro toolchains.
You can download pre-built toolchains from:
http://www.linaro.org/downloads/
@@ -14,97 +14,97 @@
Compile the source
------------------
-sLD3 reference board:
- $ make uniphier_sld3_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+The source can be configured and built with the following commands:
-LD4 reference board:
- $ make uniphier_ld4_sld8_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+ $ make <defconfig>
+ $ make CROSS_COMPILE=<toolchain-prefix> DEVICE_TREE=<device-tree>
-sLD8 reference board:
- $ make uniphier_ld4_sld8_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-sld8-ref
+The recommended <toolchain-prefix> is `arm-linux-gnueabihf-` for 32bit SoCs,
+`aarch64-linux-gnu-` for 64bit SoCs, but you may wish to change it to use your
+favorite compiler.
-Pro4 reference board:
- $ make uniphier_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+The following tables show <defconfig> and <device-tree> for each board.
-Pro4 Ace board:
- $ make uniphier_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro4-ace
+32bit SoC boards:
-Pro4 Sanji board:
- $ make uniphier_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro4-sanji
+ Board | <defconfig> | <device-tree>
+---------------|------------------------------|------------------------------
+sLD3 reference | uniphier_sld3_defconfig | uniphier-sld3-ref (default)
+LD4 reference | uniphier_ld4_sld8_defconfig | uniphier-ld4-ref (default)
+sld8 reference | uniphier_ld4_sld8_defconfig | uniphier-sld8-def
+Pro4 reference | uniphier_pro4_defconfig | uniphier-pro4-ref (default)
+Pro4 Ace | uniphier_pro4_defconfig | uniphier-pro4-ace
+Pro4 Sanji | uniphier_pro4_defconfig | uniphier-pro4-sanji
+Pro5 4KBOX | uniphier_pxs2_ld6b_defconfig | uniphier-pro5-4kbox
+PXs2 Gentil | uniphier_pxs2_ld6b_defconfig | uniphier-pxs2-gentil
+PXs2 Vodka | uniphier_pxs2_ld6b_defconfig | uniphier-pxs2-vodka (default)
+LD6b reference | uniphier_pxs2_ld6b_defconfig | uniphier-ld6b-ref
-Pro5 4KBOX Board:
+64bit SoC boards:
+
+ Board | <defconfig> | <device-tree>
+---------------|-----------------------|----------------------------
+LD11 reference | uniphier_v8_defconfig | uniphier-ld11-ref
+LD11 Global | uniphier_v8_defconfig | uniphier-ld11-global
+LD20 reference | uniphier_v8_defconfig | uniphier-ld20-ref (default)
+LD20 Global | uniphier_v8_defconfig | uniphier-ld20-global
+
+For example, to compile the source for PXs2 Vodka board, run the following:
+
$ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro5-4kbox
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pxs2-vodka
-PXs2 Gentil board:
- $ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pxs2-gentil
+The device tree marked as (default) can be omitted. `uniphier-pxs2-vodka` is
+the default device tree for the configuration `uniphier_pxs2_ld6b_defconfig`,
+so the following gives the same result.
-PXs2 Vodka board:
$ make uniphier_pxs2_ld6b_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabihf-
-LD6b reference board:
- $ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-ld6b-ref
-LD11 reference board:
- $ make uniphier_ld11_defconfig
- $ make CROSS_COMPILE=aarch64-linux-gnu-
+Booting 32bit SoC boards
+------------------------
-LD20 reference board:
- $ make uniphier_ld20_defconfig
- $ make CROSS_COMPILE=aarch64-linux-gnu-
+The build command will generate the following:
+- u-boot.bin
+- spl/u-boot.bin
-PXs3 reference board:
- $ make uniphier_v8_defconfig
- $ make CROSS_COMPILE=aarch64-linux-gnu- DEVICE_TREE=uniphier-pxs3-ref
-
-You may wish to change the "CROSS_COMPILE=..." to use your favorite compiler.
-
-
-Burn U-Boot images to NAND
---------------------------
-
-Write the following to the NAND device:
+U-Boot can boot UniPhier 32bit SoC boards by itself. Flash the generated images
+to the storage device (NAND or eMMC) on your board.
- spl/u-boot-spl.bin at the offset address 0x00000000
- u-boot.bin at the offset address 0x00020000
-or
+The `u-boot-with-spl.bin` is the concatenation of the two (with appropriate
+padding), so you can also do:
- u-boot-with-spl.bin at the offset address 0x00000000
If a TFTP server is available, the images can be easily updated.
Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
-and then run the following command at the U-Boot command line:
+and run the following command at the U-Boot command line:
- => run nandupdate
+To update the images in NAND:
+
+ => run nandupdate
+
+To update the images in eMMC:
+
+ => run emmcupdate
-Burn U-Boot images to eMMC
---------------------------
+Booting 64bit SoC boards
+------------------------
-Write the following to the Boot partition 1 of the eMMC device:
+The build command will generate the following:
+- u-boot.bin
- - spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.bin at the offset address 0x00020000
+However, U-Boot is not the first stage loader for UniPhier 64bit SoC boards.
+U-Boot serves as a non-secure boot loader loaded by [ARM Trusted Firmware],
+so you need to provide the `u-boot.bin` to the build command of ARM Trusted
+Firmware.
-or
-
- - u-boot-with-spl.bin at the offset address 0x00000000
-
-If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
-and then run the following command at the U-Boot command line:
-
- => run emmcupdate
+[ARM Trusted Firmware]: https://github.com/ARM-software/arm-trusted-firmware
UniPhier specific commands
@@ -179,4 +179,4 @@
--
Masahiro Yamada <yamada.masahiro@socionext.com>
-Jan. 2017
+Jul. 2017
diff --git a/doc/device-tree-bindings/ram/st,stm32-fmc.txt b/doc/device-tree-bindings/ram/st,stm32-fmc.txt
index 3d1392c..99f76d5 100644
--- a/doc/device-tree-bindings/ram/st,stm32-fmc.txt
+++ b/doc/device-tree-bindings/ram/st,stm32-fmc.txt
@@ -40,12 +40,19 @@
pinctrl-names = "default";
status = "okay";
- mr-nbanks = <1>;
/* sdram memory configuration from sdram datasheet */
- bank1: bank@0 {
- st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_2
+ bank1: bank@0 {
+ st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_2
CAS_3 RD_BURST_EN RD_PIPE_DL_0>;
- st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_60 TRAS_42 TRC_60 TRP_18
+ st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_60 TRAS_42 TRC_60 TRP_18
TRCD_18>;
- };
-}
+ };
+
+ /* sdram memory configuration from sdram datasheet */
+ bank2: bank@1 {
+ st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_2
+ CAS_3 RD_BURST_EN RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_60 TRAS_42 TRC_60 TRP_18
+ TRCD_18>;
+ };
+ }
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
index afff301..136d3d7 100644
--- a/doc/uImage.FIT/source_file_format.txt
+++ b/doc/uImage.FIT/source_file_format.txt
@@ -159,8 +159,8 @@
Mandatory properties:
- description : Textual description of the component sub-image
- type : Name of component sub-image type, supported types are:
- "standalone", "kernel", "ramdisk", "firmware", "script", "filesystem",
- "flat_dt" and others (see uimage_type in common/image.c).
+ "standalone", "kernel", "kernel_noload", "ramdisk", "firmware", "script",
+ "filesystem", "flat_dt" and others (see uimage_type in common/image.c).
- data : Path to the external file which contains this node's binary data.
- compression : Compression used by included data. Supported compressions
are "gzip" and "bzip2". If no compression is used compression property
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6da412d..606347f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1183,11 +1183,6 @@
ret = ahci_start_ports(uc_priv);
if (ret)
return ret;
-
- debug("Scanning %s\n", dev->name);
- ret = scsi_scan_dev(dev, true);
- if (ret)
- return ret;
#endif
return 0;
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index 83b6328..e68d927 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -65,6 +65,8 @@
debug("%s(dev=%p, index=%d, clk=%p)\n", __func__, dev, index, clk);
assert(clk);
+ clk->dev = NULL;
+
ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
index, &args);
if (ret) {
@@ -102,6 +104,7 @@
int index;
debug("%s(dev=%p, name=%s, clk=%p)\n", __func__, dev, name, clk);
+ clk->dev = NULL;
index = dev_read_stringlist_search(dev, "clock-names", name);
if (index < 0) {
@@ -111,6 +114,30 @@
return clk_get_by_index(dev, index, clk);
}
+
+int clk_release_all(struct clk *clk, int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ debug("%s(clk[%d]=%p)\n", __func__, i, &clk[i]);
+
+ /* check if clock has been previously requested */
+ if (!clk[i].dev)
+ continue;
+
+ ret = clk_disable(&clk[i]);
+ if (ret && ret != -ENOSYS)
+ return ret;
+
+ ret = clk_free(&clk[i]);
+ if (ret && ret != -ENOSYS)
+ return ret;
+ }
+
+ return 0;
+}
+
#endif /* OF_CONTROL */
int clk_request(struct udevice *dev, struct clk *clk)
diff --git a/drivers/clk/clk_stm32f7.c b/drivers/clk/clk_stm32f7.c
index fcdc3c0..255a583 100644
--- a/drivers/clk/clk_stm32f7.c
+++ b/drivers/clk/clk_stm32f7.c
@@ -12,6 +12,8 @@
#include <asm/arch/stm32.h>
#include <asm/arch/stm32_periph.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
#define RCC_CR_HSION BIT(0)
#define RCC_CR_HSEON BIT(16)
#define RCC_CR_HSERDY BIT(17)
@@ -83,6 +85,10 @@
#define APB_PSC_8 0x6
#define APB_PSC_16 0x7
+struct stm32_clk {
+ struct stm32_rcc_regs *base;
+};
+
#if !defined(CONFIG_STM32_HSE_HZ)
#error "CONFIG_STM32_HSE_HZ not defined!"
#else
@@ -104,23 +110,26 @@
#endif
#endif
-int configure_clocks(void)
+static int configure_clocks(struct udevice *dev)
{
+ struct stm32_clk *priv = dev_get_priv(dev);
+ struct stm32_rcc_regs *regs = priv->base;
+
/* Reset RCC configuration */
- setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
- writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
- clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
+ setbits_le32(®s->cr, RCC_CR_HSION);
+ writel(0, ®s->cfgr); /* Reset CFGR */
+ clrbits_le32(®s->cr, (RCC_CR_HSEON | RCC_CR_CSSON
| RCC_CR_PLLON));
- writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
- clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
- writel(0, &STM32_RCC->cir); /* Disable all interrupts */
+ writel(0x24003010, ®s->pllcfgr); /* Reset value from RM */
+ clrbits_le32(®s->cr, RCC_CR_HSEBYP);
+ writel(0, ®s->cir); /* Disable all interrupts */
/* Configure for HSE+PLL operation */
- setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
- while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
+ setbits_le32(®s->cr, RCC_CR_HSEON);
+ while (!(readl(®s->cr) & RCC_CR_HSERDY))
;
- setbits_le32(&STM32_RCC->cfgr, ((
+ setbits_le32(®s->cfgr, ((
sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
| (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
| (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
@@ -132,15 +141,15 @@
pllcfgr |= sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT;
pllcfgr |= ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT;
pllcfgr |= sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT;
- writel(pllcfgr, &STM32_RCC->pllcfgr);
+ writel(pllcfgr, ®s->pllcfgr);
/* Enable the main PLL */
- setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
- while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
+ setbits_le32(®s->cr, RCC_CR_PLLON);
+ while (!(readl(®s->cr) & RCC_CR_PLLRDY))
;
/* Enable high performance mode, System frequency up to 200 MHz */
- setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
+ setbits_le32(®s->apb1enr, RCC_APB1ENR_PWREN);
setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODEN);
/* Infinite wait! */
while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODRDY))
@@ -152,18 +161,20 @@
;
stm32_flash_latency_cfg(5);
- clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
- setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
+ clrbits_le32(®s->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
+ setbits_le32(®s->cfgr, RCC_CFGR_SW_PLL);
- while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
+ while ((readl(®s->cfgr) & RCC_CFGR_SWS_MASK) !=
RCC_CFGR_SWS_PLL)
;
return 0;
}
-unsigned long clock_get(enum clock clck)
+static unsigned long stm32_clk_get_rate(struct clk *clk)
{
+ struct stm32_clk *priv = dev_get_priv(clk->dev);
+ struct stm32_rcc_regs *regs = priv->base;
u32 sysclk = 0;
u32 shift = 0;
/* Prescaler table lookups for clock computation */
@@ -174,53 +185,61 @@
0, 0, 0, 0, 1, 2, 3, 4
};
- if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
+ if ((readl(®s->cfgr) & RCC_CFGR_SWS_MASK) ==
RCC_CFGR_SWS_PLL) {
u16 pllm, plln, pllp;
- pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
- plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
+ pllm = (readl(®s->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
+ plln = ((readl(®s->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
>> RCC_PLLCFGR_PLLN_SHIFT);
- pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
+ pllp = ((((readl(®s->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
>> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
+ } else {
+ return -EINVAL;
}
- switch (clck) {
- case CLOCK_CORE:
- return sysclk;
- break;
- case CLOCK_AHB:
+ switch (clk->id) {
+ /*
+ * AHB CLOCK: 3 x 32 bits consecutive registers are used :
+ * AHB1, AHB2 and AHB3
+ */
+ case STM32F7_AHB1_CLOCK(GPIOA) ... STM32F7_AHB3_CLOCK(QSPI):
shift = ahb_psc_table[(
- (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
+ (readl(®s->cfgr) & RCC_CFGR_AHB_PSC_MASK)
>> RCC_CFGR_HPRE_SHIFT)];
return sysclk >>= shift;
break;
- case CLOCK_APB1:
+ /* APB1 CLOCK */
+ case STM32F7_APB1_CLOCK(TIM2) ... STM32F7_APB1_CLOCK(UART8):
shift = apb_psc_table[(
- (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
+ (readl(®s->cfgr) & RCC_CFGR_APB1_PSC_MASK)
>> RCC_CFGR_PPRE1_SHIFT)];
return sysclk >>= shift;
break;
- case CLOCK_APB2:
+ /* APB2 CLOCK */
+ case STM32F7_APB2_CLOCK(TIM1) ... STM32F7_APB2_CLOCK(LTDC):
shift = apb_psc_table[(
- (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
+ (readl(®s->cfgr) & RCC_CFGR_APB2_PSC_MASK)
>> RCC_CFGR_PPRE2_SHIFT)];
return sysclk >>= shift;
break;
default:
- return 0;
+ error("clock index %ld out of range\n", clk->id);
+ return -EINVAL;
break;
}
}
static int stm32_clk_enable(struct clk *clk)
{
+ struct stm32_clk *priv = dev_get_priv(clk->dev);
+ struct stm32_rcc_regs *regs = priv->base;
u32 offset = clk->id / 32;
u32 bit_index = clk->id % 32;
debug("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n",
__func__, clk->id, offset, bit_index);
- setbits_le32(&STM32_RCC->ahb1enr + offset, BIT(bit_index));
+ setbits_le32(®s->ahb1enr + offset, BIT(bit_index));
return 0;
}
@@ -247,7 +266,17 @@
static int stm32_clk_probe(struct udevice *dev)
{
debug("%s: stm32_clk_probe\n", __func__);
- configure_clocks();
+
+ struct stm32_clk *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
+
+ addr = devfdt_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->base = (struct stm32_rcc_regs *)addr;
+
+ configure_clocks(dev);
return 0;
}
@@ -272,6 +301,7 @@
static struct clk_ops stm32_clk_ops = {
.of_xlate = stm32_clk_of_xlate,
.enable = stm32_clk_enable,
+ .get_rate = stm32_clk_get_rate,
};
static const struct udevice_id stm32_clk_ids[] = {
diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c
index 52cad38..e1d9aeb 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -283,7 +283,7 @@
.name = "rockchip_rk3368_cru",
.id = UCLASS_CLK,
.of_match = rk3368_clk_ids,
- .priv_auto_alloc_size = sizeof(struct rk3368_cru),
+ .priv_auto_alloc_size = sizeof(struct rk3368_clk_priv),
.ofdata_to_platdata = rk3368_clk_ofdata_to_platdata,
.ops = &rk3368_clk_ops,
.bind = rk3368_clk_bind,
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index fb5c4e8..f8b19a4 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -16,10 +16,10 @@
suitable malloc() implementation. If you are not using the
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
- must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size.
In most cases driver model will only allocate a few uclasses
and devices in SPL, so 1KB should be enable. See
- CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+ CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it.
config TPL_DM
bool "Enable Driver Model for TPL"
@@ -29,10 +29,10 @@
suitable malloc() implementation. If you are not using the
full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
- must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size.
In most cases driver model will only allocate a few uclasses
and devices in SPL, so 1KB should be enough. See
- CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+ CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it.
Disable this for very small implementations.
config DM_WARN
diff --git a/drivers/core/of_access.c b/drivers/core/of_access.c
index 2bb23ee..c31cba7 100644
--- a/drivers/core/of_access.c
+++ b/drivers/core/of_access.c
@@ -665,6 +665,13 @@
index, out_args);
}
+int of_count_phandle_with_args(const struct device_node *np,
+ const char *list_name, const char *cells_name)
+{
+ return __of_parse_phandle_with_args(np, list_name, cells_name, 0,
+ -1, NULL);
+}
+
static void of_alias_add(struct alias_prop *ap, struct device_node *np,
int id, const char *stem, int stem_len)
{
diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
index fd068b0..c1a2e9f 100644
--- a/drivers/core/ofnode.c
+++ b/drivers/core/ofnode.c
@@ -14,6 +14,7 @@
#include <dm/of_addr.h>
#include <dm/ofnode.h>
#include <linux/err.h>
+#include <linux/ioport.h>
int ofnode_read_u32(ofnode node, const char *propname, u32 *outp)
{
@@ -198,13 +199,14 @@
const __be32 *prop_val;
uint flags;
u64 size;
+ int na;
- prop_val = of_get_address(
- (struct device_node *)ofnode_to_np(node), index,
- &size, &flags);
+ prop_val = of_get_address(ofnode_to_np(node), index, &size,
+ &flags);
if (!prop_val)
return FDT_ADDR_T_NONE;
- return be32_to_cpup(prop_val);
+ na = of_n_addr_cells(ofnode_to_np(node));
+ return of_read_number(prop_val, na);
} else {
return fdt_get_base_address(gd->fdt_blob,
ofnode_to_offset(node));
@@ -313,6 +315,18 @@
return 0;
}
+int ofnode_count_phandle_with_args(ofnode node, const char *list_name,
+ const char *cells_name)
+{
+ if (ofnode_is_np(node))
+ return of_count_phandle_with_args(ofnode_to_np(node),
+ list_name, cells_name);
+ else
+ return fdtdec_parse_phandle_with_args(gd->fdt_blob,
+ ofnode_to_offset(node), list_name, cells_name,
+ 0, -1, NULL);
+}
+
ofnode ofnode_path(const char *path)
{
if (of_live_active())
@@ -593,3 +607,23 @@
return false;
}
+
+int ofnode_read_resource(ofnode node, uint index, struct resource *res)
+{
+ if (ofnode_is_np(node)) {
+ return of_address_to_resource(ofnode_to_np(node), index, res);
+ } else {
+ struct fdt_resource fres;
+ int ret;
+
+ ret = fdt_get_resource(gd->fdt_blob, ofnode_to_offset(node),
+ "reg", index, &fres);
+ if (ret < 0)
+ return -EINVAL;
+ memset(res, '\0', sizeof(*res));
+ res->start = fres.start;
+ res->end = fres.end;
+
+ return 0;
+ }
+}
diff --git a/drivers/core/read.c b/drivers/core/read.c
index eafe727..fe40bed 100644
--- a/drivers/core/read.c
+++ b/drivers/core/read.c
@@ -114,7 +114,7 @@
return fdt_get_phandle(gd->fdt_blob, ofnode_to_offset(node));
}
-const u32 *dev_read_prop(struct udevice *dev, const char *propname, int *lenp)
+const void *dev_read_prop(struct udevice *dev, const char *propname, int *lenp)
{
return ofnode_get_property(dev_ofnode(dev), propname, lenp);
}
@@ -159,3 +159,8 @@
return fdtdec_get_is_enabled(gd->fdt_blob,
ofnode_to_offset(node));
}
+
+int dev_read_resource(struct udevice *dev, uint index, struct resource *res)
+{
+ return ofnode_read_resource(dev_ofnode(dev), index, res);
+}
diff --git a/drivers/core/read_extra.c b/drivers/core/read_extra.c
index a6d2f34..e94648f 100644
--- a/drivers/core/read_extra.c
+++ b/drivers/core/read_extra.c
@@ -11,27 +11,4 @@
#include <dm/read.h>
#include <linux/ioport.h>
-int dev_read_resource(struct udevice *dev, uint index, struct resource *res)
-{
- ofnode node = dev_ofnode(dev);
-
-#ifdef CONFIG_OF_LIVE
- if (ofnode_is_np(node)) {
- return of_address_to_resource(ofnode_to_np(node), index, res);
- } else
-#endif
- {
- struct fdt_resource fres;
- int ret;
-
- ret = fdt_get_resource(gd->fdt_blob, ofnode_to_offset(node),
- "reg", index, &fres);
- if (ret < 0)
- return -EINVAL;
- memset(res, '\0', sizeof(*res));
- res->start = fres.start;
- res->end = fres.end;
-
- return 0;
- }
-}
+/* This file can hold non-inlined dev_read_...() functions */
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index ceb33e3..f6281f4 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -165,18 +165,48 @@
return ret;
}
-void dfu_write_transaction_cleanup(struct dfu_entity *dfu)
+void dfu_transaction_cleanup(struct dfu_entity *dfu)
{
/* clear everything */
dfu->crc = 0;
dfu->offset = 0;
dfu->i_blk_seq_num = 0;
- dfu->i_buf_start = dfu_buf;
- dfu->i_buf_end = dfu_buf;
+ dfu->i_buf_start = dfu_get_buf(dfu);
+ dfu->i_buf_end = dfu->i_buf_start;
dfu->i_buf = dfu->i_buf_start;
+ dfu->r_left = 0;
+ dfu->b_left = 0;
+ dfu->bad_skip = 0;
+
dfu->inited = 0;
}
+int dfu_transaction_initiate(struct dfu_entity *dfu, bool read)
+{
+ int ret = 0;
+
+ if (dfu->inited)
+ return 0;
+
+ dfu_transaction_cleanup(dfu);
+
+ if (dfu->i_buf_start == NULL)
+ return -ENOMEM;
+
+ dfu->i_buf_end = dfu->i_buf_start + dfu_get_buf_size();
+
+ if (read) {
+ ret = dfu->get_medium_size(dfu, &dfu->r_left);
+ if (ret < 0)
+ return ret;
+ debug("%s: %s %lld [B]\n", __func__, dfu->name, dfu->r_left);
+ }
+
+ dfu->inited = 1;
+
+ return 0;
+}
+
int dfu_flush(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
{
int ret = 0;
@@ -192,7 +222,7 @@
printf("\nDFU complete %s: 0x%08x\n", dfu_hash_algo->name,
dfu->crc);
- dfu_write_transaction_cleanup(dfu);
+ dfu_transaction_cleanup(dfu);
return ret;
}
@@ -205,25 +235,14 @@
__func__, dfu->name, buf, size, blk_seq_num, dfu->offset,
(unsigned long)(dfu->i_buf - dfu->i_buf_start));
- if (!dfu->inited) {
- /* initial state */
- dfu->crc = 0;
- dfu->offset = 0;
- dfu->bad_skip = 0;
- dfu->i_blk_seq_num = 0;
- dfu->i_buf_start = dfu_get_buf(dfu);
- if (dfu->i_buf_start == NULL)
- return -ENOMEM;
- dfu->i_buf_end = dfu_get_buf(dfu) + dfu_buf_size;
- dfu->i_buf = dfu->i_buf_start;
-
- dfu->inited = 1;
- }
+ ret = dfu_transaction_initiate(dfu, false);
+ if (ret < 0)
+ return ret;
if (dfu->i_blk_seq_num != blk_seq_num) {
printf("%s: Wrong sequence number! [%d] [%d]\n",
__func__, dfu->i_blk_seq_num, blk_seq_num);
- dfu_write_transaction_cleanup(dfu);
+ dfu_transaction_cleanup(dfu);
return -1;
}
@@ -247,7 +266,7 @@
if ((dfu->i_buf + size) > dfu->i_buf_end) {
ret = dfu_write_buffer_drain(dfu);
if (ret) {
- dfu_write_transaction_cleanup(dfu);
+ dfu_transaction_cleanup(dfu);
return ret;
}
}
@@ -256,7 +275,7 @@
if ((dfu->i_buf + size) > dfu->i_buf_end) {
error("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf,
size, dfu->i_buf_end);
- dfu_write_transaction_cleanup(dfu);
+ dfu_transaction_cleanup(dfu);
return -1;
}
@@ -267,7 +286,7 @@
if (size == 0 || (dfu->i_buf + size) > dfu->i_buf_end) {
ret = dfu_write_buffer_drain(dfu);
if (ret) {
- dfu_write_transaction_cleanup(dfu);
+ dfu_transaction_cleanup(dfu);
return ret;
}
}
@@ -334,28 +353,9 @@
debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x i_buf: 0x%p\n",
__func__, dfu->name, buf, size, blk_seq_num, dfu->i_buf);
- if (!dfu->inited) {
- dfu->i_buf_start = dfu_get_buf(dfu);
- if (dfu->i_buf_start == NULL)
- return -ENOMEM;
-
- dfu->r_left = dfu->get_medium_size(dfu);
- if (dfu->r_left < 0)
- return dfu->r_left;
-
- debug("%s: %s %ld [B]\n", __func__, dfu->name, dfu->r_left);
-
- dfu->i_blk_seq_num = 0;
- dfu->crc = 0;
- dfu->offset = 0;
- dfu->i_buf_end = dfu_get_buf(dfu) + dfu_buf_size;
- dfu->i_buf = dfu->i_buf_start;
- dfu->b_left = 0;
-
- dfu->bad_skip = 0;
-
- dfu->inited = 1;
- }
+ ret = dfu_transaction_initiate(dfu, true);
+ if (ret < 0)
+ return ret;
if (dfu->i_blk_seq_num != blk_seq_num) {
printf("%s: Wrong sequence number! [%d] [%d]\n",
@@ -377,17 +377,7 @@
dfu_hash_algo->name, dfu->crc);
puts("\nUPLOAD ... done\nCtrl+C to exit ...\n");
- dfu->i_blk_seq_num = 0;
- dfu->crc = 0;
- dfu->offset = 0;
- dfu->i_buf_start = dfu_buf;
- dfu->i_buf_end = dfu_buf;
- dfu->i_buf = dfu->i_buf_start;
- dfu->b_left = 0;
-
- dfu->bad_skip = 0;
-
- dfu->inited = 0;
+ dfu_transaction_cleanup(dfu);
}
return ret;
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 926ccbd..bb23e7f 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -17,7 +17,7 @@
#include <mmc.h>
static unsigned char *dfu_file_buf;
-static long dfu_file_buf_len;
+static u64 dfu_file_buf_len;
static long dfu_file_buf_filled;
static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
@@ -107,7 +107,7 @@
}
static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu,
- void *buf, long *len)
+ void *buf, u64 *len)
{
const char *fsname, *opname;
char cmd_buf[DFU_CMD_BUF_SIZE];
@@ -150,7 +150,7 @@
sprintf(cmd_buf + strlen(cmd_buf), " %s", dfu->name);
if (op == DFU_OP_WRITE)
- sprintf(cmd_buf + strlen(cmd_buf), " %lx", *len);
+ sprintf(cmd_buf + strlen(cmd_buf), " %llx", *len);
debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf);
@@ -209,23 +209,23 @@
return ret;
}
-long dfu_get_medium_size_mmc(struct dfu_entity *dfu)
+int dfu_get_medium_size_mmc(struct dfu_entity *dfu, u64 *size)
{
int ret;
- long len;
switch (dfu->layout) {
case DFU_RAW_ADDR:
- return dfu->data.mmc.lba_size * dfu->data.mmc.lba_blk_size;
+ *size = dfu->data.mmc.lba_size * dfu->data.mmc.lba_blk_size;
+ return 0;
case DFU_FS_FAT:
case DFU_FS_EXT4:
dfu_file_buf_filled = -1;
- ret = mmc_file_op(DFU_OP_SIZE, dfu, NULL, &len);
+ ret = mmc_file_op(DFU_OP_SIZE, dfu, NULL, size);
if (ret < 0)
return ret;
- if (len > CONFIG_SYS_DFU_MAX_FILE_SIZE)
+ if (*size > CONFIG_SYS_DFU_MAX_FILE_SIZE)
return -1;
- return len;
+ return 0;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
@@ -237,7 +237,7 @@
long *len)
{
int ret;
- long file_len;
+ u64 file_len;
if (dfu_file_buf_filled == -1) {
ret = mmc_file_op(DFU_OP_READ, dfu, dfu_file_buf, &file_len);
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
index 97cd608..6dc9ff7 100644
--- a/drivers/dfu/dfu_nand.c
+++ b/drivers/dfu/dfu_nand.c
@@ -114,9 +114,11 @@
return ret;
}
-long dfu_get_medium_size_nand(struct dfu_entity *dfu)
+int dfu_get_medium_size_nand(struct dfu_entity *dfu, u64 *size)
{
- return dfu->data.nand.size;
+ *size = dfu->data.nand.size;
+
+ return 0;
}
static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c
index c1b0021..6e3f531 100644
--- a/drivers/dfu/dfu_ram.c
+++ b/drivers/dfu/dfu_ram.c
@@ -41,9 +41,11 @@
return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset, buf, len);
}
-long dfu_get_medium_size_ram(struct dfu_entity *dfu)
+int dfu_get_medium_size_ram(struct dfu_entity *dfu, u64 *size)
{
- return dfu->data.ram.size;
+ *size = dfu->data.ram.size;
+
+ return 0;
}
static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset,
diff --git a/drivers/dfu/dfu_sf.c b/drivers/dfu/dfu_sf.c
index b6d5fe2..2d2586d 100644
--- a/drivers/dfu/dfu_sf.c
+++ b/drivers/dfu/dfu_sf.c
@@ -12,9 +12,11 @@
#include <spi.h>
#include <spi_flash.h>
-static long dfu_get_medium_size_sf(struct dfu_entity *dfu)
+static int dfu_get_medium_size_sf(struct dfu_entity *dfu, u64 *size)
{
- return dfu->data.sf.size;
+ *size = dfu->data.sf.size;
+
+ return 0;
}
static int dfu_read_medium_sf(struct dfu_entity *dfu, u64 offset, void *buf,
diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c
index 687cd74..4965583 100644
--- a/drivers/gpio/tegra_gpio.c
+++ b/drivers/gpio/tegra_gpio.c
@@ -337,11 +337,13 @@
* This driver does not make use of interrupts, other than to figure
* out the number of GPIO banks
*/
- if (!fdt_getprop(gd->fdt_blob, dev_of_offset(parent), "interrupts",
- &len))
- return -EINVAL;
+ len = dev_read_size(parent, "interrupts");
+ if (len < 0)
+ return len;
bank_count = len / 3 / sizeof(u32);
- ctlr = (struct gpio_ctlr *)devfdt_get_addr(parent);
+ ctlr = (struct gpio_ctlr *)dev_read_addr(parent);
+ if ((ulong)ctlr == FDT_ADDR_T_NONE)
+ return -EINVAL;
}
#endif
for (bank = 0; bank < bank_count; bank++) {
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 055f481..3255e8e 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -9,7 +9,6 @@
#include <common.h>
#include <dm.h>
#include <errno.h>
-#include <fdtdec.h>
#include <i2c.h>
#include <asm/io.h>
#include <clk.h>
@@ -365,7 +364,11 @@
i2c_bus->id = dev->seq;
i2c_bus->type = dev_get_driver_data(dev);
- i2c_bus->regs = (struct i2c_ctlr *)devfdt_get_addr(dev);
+ i2c_bus->regs = (struct i2c_ctlr *)dev_read_addr(dev);
+ if ((ulong)i2c_bus->regs == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot get regs address\n", __func__);
+ return -EINVAL;
+ }
ret = reset_get_by_name(dev, "i2c", &i2c_bus->reset_ctl);
if (ret) {
diff --git a/drivers/misc/rockchip-efuse.c b/drivers/misc/rockchip-efuse.c
index 423d24c..2e3bc91 100644
--- a/drivers/misc/rockchip-efuse.c
+++ b/drivers/misc/rockchip-efuse.c
@@ -142,7 +142,7 @@
{
struct rockchip_efuse_platdata *plat = dev_get_platdata(dev);
- plat->base = (void *)devfdt_get_addr(dev);
+ plat->base = (void *)dev_read_addr(dev);
return 0;
}
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index 7d945a1..7474529 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -11,10 +11,10 @@
#include <common.h>
#include <dm.h>
#include <errno.h>
+#include <mmc.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch-tegra/tegra_mmc.h>
-#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -599,8 +599,7 @@
cfg->name = dev->name;
- bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
- "bus-width", 1);
+ bus_width = dev_read_u32_default(dev, "bus-width", 1);
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
cfg->host_caps = 0;
@@ -621,7 +620,7 @@
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
- priv->reg = (void *)devfdt_get_addr(dev);
+ priv->reg = (void *)dev_read_addr(dev);
ret = reset_get_by_name(dev, "sdhci", &priv->reset_ctl);
if (ret) {
@@ -648,12 +647,10 @@
return ret;
/* These GPIOs are optional */
- gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio,
- GPIOD_IS_IN);
- gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio,
- GPIOD_IS_IN);
- gpio_request_by_name(dev, "power-gpios", 0,
- &priv->pwr_gpio, GPIOD_IS_OUT);
+ gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
+ gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN);
+ gpio_request_by_name(dev, "power-gpios", 0, &priv->pwr_gpio,
+ GPIOD_IS_OUT);
if (dm_gpio_is_valid(&priv->pwr_gpio))
dm_gpio_set_value(&priv->pwr_gpio, 1);
diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c
index 7d9c63b..cb5cf8b 100644
--- a/drivers/pci/pci_tegra.c
+++ b/drivers/pci/pci_tegra.c
@@ -16,7 +16,6 @@
#include <clk.h>
#include <dm.h>
#include <errno.h>
-#include <fdtdec.h>
#include <malloc.h>
#include <pci.h>
#include <power-domain.h>
@@ -25,6 +24,7 @@
#include <asm/io.h>
#include <asm/gpio.h>
+#include <linux/ioport.h>
#include <linux/list.h>
#ifndef CONFIG_TEGRA186
@@ -220,9 +220,9 @@
struct tegra_pcie {
struct pci_controller hose;
- struct fdt_resource pads;
- struct fdt_resource afi;
- struct fdt_resource cs;
+ struct resource pads;
+ struct resource afi;
+ struct resource cs;
struct list_head ports;
unsigned long xbar;
@@ -364,13 +364,12 @@
return 0;
}
-static int tegra_pcie_port_parse_dt(const void *fdt, int node,
- struct tegra_pcie_port *port)
+static int tegra_pcie_port_parse_dt(ofnode node, struct tegra_pcie_port *port)
{
const u32 *addr;
int len;
- addr = fdt_getprop(fdt, node, "assigned-addresses", &len);
+ addr = ofnode_get_property(node, "assigned-addresses", &len);
if (!addr) {
error("property \"assigned-addresses\" not found");
return -FDT_ERR_NOTFOUND;
@@ -382,7 +381,7 @@
return 0;
}
-static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes,
+static int tegra_pcie_get_xbar_config(ofnode node, u32 lanes,
enum tegra_pci_id id, unsigned long *xbar)
{
switch (id) {
@@ -456,14 +455,12 @@
return -FDT_ERR_NOTFOUND;
}
-static int tegra_pcie_parse_port_info(const void *fdt, int node,
- unsigned int *index,
- unsigned int *lanes)
+static int tegra_pcie_parse_port_info(ofnode node, uint *index, uint *lanes)
{
struct fdt_pci_addr addr;
int err;
- err = fdtdec_get_int(fdt, node, "nvidia,num-lanes", 0);
+ err = ofnode_read_u32_default(node, "nvidia,num-lanes", -1);
if (err < 0) {
error("failed to parse \"nvidia,num-lanes\" property");
return err;
@@ -471,7 +468,7 @@
*lanes = err;
- err = fdtdec_get_pci_addr(fdt, node, 0, "reg", &addr);
+ err = ofnode_read_pci_addr(node, 0, "reg", &addr);
if (err < 0) {
error("failed to parse \"reg\" property");
return err;
@@ -487,28 +484,26 @@
return 0;
}
-static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id,
+static int tegra_pcie_parse_dt(struct udevice *dev, enum tegra_pci_id id,
struct tegra_pcie *pcie)
{
- int err, subnode;
+ ofnode subnode;
u32 lanes = 0;
+ int err;
- err = fdt_get_named_resource(fdt, node, "reg", "reg-names", "pads",
- &pcie->pads);
+ err = dev_read_resource(dev, 0, &pcie->pads);
if (err < 0) {
error("resource \"pads\" not found");
return err;
}
- err = fdt_get_named_resource(fdt, node, "reg", "reg-names", "afi",
- &pcie->afi);
+ err = dev_read_resource(dev, 1, &pcie->afi);
if (err < 0) {
error("resource \"afi\" not found");
return err;
}
- err = fdt_get_named_resource(fdt, node, "reg", "reg-names", "cs",
- &pcie->cs);
+ err = dev_read_resource(dev, 2, &pcie->cs);
if (err < 0) {
error("resource \"cs\" not found");
return err;
@@ -531,12 +526,11 @@
}
#endif
- fdt_for_each_subnode(subnode, fdt, node) {
+ dev_for_each_subnode(subnode, dev) {
unsigned int index = 0, num_lanes = 0;
struct tegra_pcie_port *port;
- err = tegra_pcie_parse_port_info(fdt, subnode, &index,
- &num_lanes);
+ err = tegra_pcie_parse_port_info(subnode, &index, &num_lanes);
if (err < 0) {
error("failed to obtain root port info");
continue;
@@ -544,7 +538,7 @@
lanes |= num_lanes << (index << 3);
- if (!fdtdec_get_is_enabled(fdt, subnode))
+ if (!ofnode_is_available(subnode))
continue;
port = malloc(sizeof(*port));
@@ -555,7 +549,7 @@
port->num_lanes = num_lanes;
port->index = index;
- err = tegra_pcie_port_parse_dt(fdt, subnode, port);
+ err = tegra_pcie_port_parse_dt(subnode, port);
if (err < 0) {
free(port);
continue;
@@ -565,7 +559,8 @@
port->pcie = pcie;
}
- err = tegra_pcie_get_xbar_config(fdt, node, lanes, id, &pcie->xbar);
+ err = tegra_pcie_get_xbar_config(dev_ofnode(dev), lanes, id,
+ &pcie->xbar);
if (err < 0) {
error("invalid lane configuration");
return err;
@@ -815,7 +810,7 @@
/* BAR 0: type 1 extended configuration space */
fpci = 0xfe100000;
- size = fdt_resource_size(&pcie->cs);
+ size = resource_size(&pcie->cs);
axi = pcie->cs.start;
afi_writel(pcie, axi, AFI_AXI_BAR0_START);
@@ -1099,7 +1094,7 @@
INIT_LIST_HEAD(&pcie->ports);
- if (tegra_pcie_parse_dt(gd->fdt_blob, dev_of_offset(dev), id, pcie))
+ if (tegra_pcie_parse_dt(dev, id, pcie))
return -EINVAL;
return 0;
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7841554..98f2a1b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -41,6 +41,24 @@
This select a dummy sandbox PHY driver. It used only to implement
the unit tests for the phy framework
+config NOP_PHY
+ bool "NOP PHY driver"
+ depends on PHY
+ help
+ Support for a no-op PHY driver (stubbed PHY driver).
+
+ This is useful when a driver uses the PHY framework but no real PHY
+ hardware exists.
+
+config SPL_NOP_PHY
+ bool "NOP PHY driver in SPL"
+ depends on SPL_PHY
+ help
+ Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
+
+ This is useful when a driver uses the PHY framework but no real PHY
+ hardware exists.
+
config PIPE3_PHY
bool "Support omap's PIPE3 PHY"
depends on PHY && ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 6ce96d2..ab56c46 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -6,5 +6,6 @@
#
obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
+obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
diff --git a/drivers/phy/nop-phy.c b/drivers/phy/nop-phy.c
new file mode 100644
index 0000000..2201cc3
--- /dev/null
+++ b/drivers/phy/nop-phy.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device.h>
+#include <generic-phy.h>
+
+static const struct udevice_id nop_phy_ids[] = {
+ { .compatible = "nop-phy" },
+ { }
+};
+
+static struct phy_ops nop_phy_ops = {
+};
+
+U_BOOT_DRIVER(nop_phy) = {
+ .name = "nop_phy",
+ .id = UCLASS_PHY,
+ .of_match = nop_phy_ids,
+ .ops = &nop_phy_ops,
+};
diff --git a/drivers/phy/phy-uclass.c b/drivers/phy/phy-uclass.c
index d8b8d58..68e518f 100644
--- a/drivers/phy/phy-uclass.c
+++ b/drivers/phy/phy-uclass.c
@@ -45,6 +45,7 @@
debug("%s(dev=%p, index=%d, phy=%p)\n", __func__, dev, index, phy);
assert(phy);
+ phy->dev = NULL;
ret = dev_read_phandle_with_args(dev, "phys", "#phy-cells", 0, index,
&args);
if (ret) {
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 2fa840c..87c9912 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -391,14 +391,33 @@
FUNCTION(i2c_slave_ao),
};
+static struct meson_bank meson_gxbb_periphs_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
+ BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_16, EE_OFF), 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
+ BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
+ BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_3, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
+ BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
+ BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
+ BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_17, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
+ BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_3, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
+};
+
+static struct meson_bank meson_gxbb_aobus_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+};
+
struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
.name = "periphs-banks",
.pin_base = 14,
.groups = meson_gxbb_periphs_groups,
.funcs = meson_gxbb_periphs_functions,
+ .banks = meson_gxbb_periphs_banks,
.num_pins = 120,
.num_groups = ARRAY_SIZE(meson_gxbb_periphs_groups),
.num_funcs = ARRAY_SIZE(meson_gxbb_periphs_functions),
+ .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks),
};
struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = {
@@ -406,9 +425,11 @@
.pin_base = 0,
.groups = meson_gxbb_aobus_groups,
.funcs = meson_gxbb_aobus_functions,
+ .banks = meson_gxbb_aobus_banks,
.num_pins = 14,
.num_groups = ARRAY_SIZE(meson_gxbb_aobus_groups),
.num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions),
+ .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks),
};
static const struct udevice_id meson_gxbb_pinctrl_match[] = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 6281f52..a860200 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -6,11 +6,14 @@
#include <common.h>
#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <fdt_support.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/sizes.h>
+#include <asm/gpio.h>
#include "pinctrl-meson.h"
@@ -117,6 +120,143 @@
.set_state = pinctrl_generic_set_state,
};
+static int meson_gpio_calc_reg_and_bit(struct udevice *dev, unsigned int offset,
+ enum meson_reg_type reg_type,
+ unsigned int *reg, unsigned int *bit)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ struct meson_bank *bank = NULL;
+ struct meson_reg_desc *desc;
+ unsigned int pin;
+ int i;
+
+ pin = priv->data->pin_base + offset;
+
+ for (i = 0; i < priv->data->num_banks; i++) {
+ if (pin >= priv->data->banks[i].first &&
+ pin <= priv->data->banks[i].last) {
+ bank = &priv->data->banks[i];
+ break;
+ }
+ }
+
+ if (!bank)
+ return -EINVAL;
+
+ desc = &bank->regs[reg_type];
+ *reg = desc->reg * 4;
+ *bit = desc->bit + pin - bank->first;
+
+ return 0;
+}
+
+static int meson_gpio_get(struct udevice *dev, unsigned int offset)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_IN, ®, &bit);
+ if (ret)
+ return ret;
+
+ return !!(readl(priv->reg_gpio + reg) & BIT(bit));
+}
+
+static int meson_gpio_set(struct udevice *dev, unsigned int offset, int value)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_OUT, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), value ? BIT(bit) : 0);
+
+ return 0;
+}
+
+static int meson_gpio_get_direction(struct udevice *dev, unsigned int offset)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit, val;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DIR, ®, &bit);
+ if (ret)
+ return ret;
+
+ val = readl(priv->reg_gpio + reg);
+
+ return (val & BIT(bit)) ? GPIOF_INPUT : GPIOF_OUTPUT;
+}
+
+static int meson_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DIR, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), 1);
+
+ return 0;
+}
+
+static int meson_gpio_direction_output(struct udevice *dev,
+ unsigned int offset, int value)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ unsigned int reg, bit;
+ int ret;
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DIR, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), 0);
+
+ ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_OUT, ®, &bit);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), value ? BIT(bit) : 0);
+
+ return 0;
+}
+
+static int meson_gpio_probe(struct udevice *dev)
+{
+ struct meson_pinctrl *priv = dev_get_priv(dev->parent);
+ struct gpio_dev_priv *uc_priv;
+
+ uc_priv = dev_get_uclass_priv(dev);
+ uc_priv->bank_name = priv->data->name;
+ uc_priv->gpio_count = priv->data->num_pins;
+
+ return 0;
+}
+
+static const struct dm_gpio_ops meson_gpio_ops = {
+ .set_value = meson_gpio_set,
+ .get_value = meson_gpio_get,
+ .get_function = meson_gpio_get_direction,
+ .direction_input = meson_gpio_direction_input,
+ .direction_output = meson_gpio_direction_output,
+};
+
+static struct driver meson_gpio_driver = {
+ .name = "meson-gpio",
+ .id = UCLASS_GPIO,
+ .probe = meson_gpio_probe,
+ .ops = &meson_gpio_ops,
+};
+
static fdt_addr_t parse_address(int offset, const char *name, int na, int ns)
{
int index, len = 0;
@@ -138,9 +278,12 @@
int meson_pinctrl_probe(struct udevice *dev)
{
struct meson_pinctrl *priv = dev_get_priv(dev);
+ struct uclass_driver *drv;
+ struct udevice *gpio_dev;
fdt_addr_t addr;
int node, gpio = -1, len;
int na, ns;
+ char *name;
na = fdt_address_cells(gd->fdt_blob, dev_of_offset(dev->parent));
if (na < 1) {
@@ -168,12 +311,32 @@
addr = parse_address(gpio, "mux", na, ns);
if (addr == FDT_ADDR_T_NONE) {
- debug("mux not found\n");
+ debug("mux address not found\n");
return -EINVAL;
}
-
priv->reg_mux = (void __iomem *)addr;
+
+ addr = parse_address(gpio, "gpio", na, ns);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("gpio address not found\n");
+ return -EINVAL;
+ }
+ priv->reg_gpio = (void __iomem *)addr;
priv->data = (struct meson_pinctrl_data *)dev_get_driver_data(dev);
+ /* Lookup GPIO driver */
+ drv = lists_uclass_lookup(UCLASS_GPIO);
+ if (!drv) {
+ puts("Cannot find GPIO driver\n");
+ return -ENOENT;
+ }
+
+ name = calloc(1, 32);
+ sprintf(name, "meson-gpio");
+
+ /* Create child device UCLASS_GPIO and bind it */
+ device_bind(dev, &meson_gpio_driver, name, NULL, gpio, &gpio_dev);
+ dev_set_of_offset(gpio_dev, gpio);
+
return 0;
}
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
index 4127a60..90d2369 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.h
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -28,15 +28,64 @@
const char *name;
struct meson_pmx_group *groups;
struct meson_pmx_func *funcs;
+ struct meson_bank *banks;
unsigned int pin_base;
unsigned int num_pins;
unsigned int num_groups;
unsigned int num_funcs;
+ unsigned int num_banks;
};
struct meson_pinctrl {
struct meson_pinctrl_data *data;
void __iomem *reg_mux;
+ void __iomem *reg_gpio;
+};
+
+/**
+ * struct meson_reg_desc - a register descriptor
+ *
+ * @reg: register offset in the regmap
+ * @bit: bit index in register
+ *
+ * The structure describes the information needed to control pull,
+ * pull-enable, direction, etc. for a single pin
+ */
+struct meson_reg_desc {
+ unsigned int reg;
+ unsigned int bit;
+};
+
+/**
+ * enum meson_reg_type - type of registers encoded in @meson_reg_desc
+ */
+enum meson_reg_type {
+ REG_PULLEN,
+ REG_PULL,
+ REG_DIR,
+ REG_OUT,
+ REG_IN,
+ NUM_REG,
+};
+
+/**
+ * struct meson bank
+ *
+ * @name: bank name
+ * @first: first pin of the bank
+ * @last: last pin of the bank
+ * @regs: array of register descriptors
+ *
+ * A bank represents a set of pins controlled by a contiguous set of
+ * bits in the domain registers. The structure specifies which bits in
+ * the regmap control the different functionalities. Each member of
+ * the @regs array refers to the first pin of the bank.
+ */
+struct meson_bank {
+ const char *name;
+ unsigned int first;
+ unsigned int last;
+ struct meson_reg_desc regs[NUM_REG];
};
#define PIN(x, b) (b + x)
@@ -65,6 +114,20 @@
.num_groups = ARRAY_SIZE(fn ## _groups), \
}
+#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+ { \
+ .name = n, \
+ .first = f, \
+ .last = l, \
+ .regs = { \
+ [REG_PULLEN] = { per, peb }, \
+ [REG_PULL] = { pr, pb }, \
+ [REG_DIR] = { dr, db }, \
+ [REG_OUT] = { or, ob }, \
+ [REG_IN] = { ir, ib }, \
+ }, \
+ }
+
#define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
extern const struct pinctrl_ops meson_pinctrl_ops;
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
index 3c9ae97..a21b640 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
@@ -496,16 +496,18 @@
(GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(6)) |
(GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(7)));
+ rk_clrsetreg(&grf->gpio4bl_iomux,
+ GPIO4B1_MASK << GPIO4B1_SHIFT,
+ GPIO4B1_MAC_TXCLK << GPIO4B1_SHIFT);
+
/* switch GPIO4B1 to 12ma drive-strength */
rk_clrsetreg(&grf->gpio1_e[3][1],
GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(1),
GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(1));
- /* Set pull normal for GPIO4B1, pull up for GPIO4B0 */
+ /* Set pull normal for GPIO4B1 */
rk_clrsetreg(&grf->gpio1_p[3][1],
- (GPIO_PULL_MASK << GPIO_PULL_SHIFT(0)) |
(GPIO_PULL_MASK << GPIO_PULL_SHIFT(1)),
- (GPIO_PULL_UP << GPIO_PULL_SHIFT(0)) |
(GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(1)));
break;
@@ -727,7 +729,7 @@
value |= (mask << (shift + 16)) | (muxval << shift);
writel(value, addr);
- /* Handle pullup/pulldown */
+ /* Handle pullup/pulldown/drive-strength */
if (flags) {
uint val = 0;
@@ -735,10 +737,15 @@
val = 1;
else if (flags & (1 << PIN_CONFIG_BIAS_PULL_DOWN))
val = 2;
+ else if (flags & (1 << PIN_CONFIG_DRIVE_STRENGTH))
+ val = 3;
+
shift = (index & 7) * 2;
ind = index >> 3;
if (banknum == 0)
addr = &priv->pmu->gpio0pull[ind];
+ else if (flags & (1 << PIN_CONFIG_DRIVE_STRENGTH))
+ addr = &priv->grf->gpio1_e[banknum - 1][ind];
else
addr = &priv->grf->gpio1_p[banknum - 1][ind];
debug("%s: addr=%p, val=%x, shift=%x\n", __func__, addr, val,
@@ -777,6 +784,9 @@
if (flags < 0)
return flags;
+ if (fdtdec_get_int(blob, pcfg_node, "drive-strength", 0) == 12)
+ flags |= 1 << PIN_CONFIG_DRIVE_STRENGTH;
+
ret = rk3288_pinctrl_set_pins(dev, ptr[0], ptr[1], ptr[2],
flags);
if (ret)
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
index 9c2db1a..e2b234f 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
@@ -59,12 +59,12 @@
UNIPHIER_PINCTRL_GROUP(i2c3),
UNIPHIER_PINCTRL_GROUP(i2c4),
UNIPHIER_PINCTRL_GROUP(nand),
- UNIPHIER_PINCTRL_GROUP_SPL(system_bus),
- UNIPHIER_PINCTRL_GROUP_SPL(system_bus_cs1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart0),
- UNIPHIER_PINCTRL_GROUP_SPL(uart1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart2),
- UNIPHIER_PINCTRL_GROUP_SPL(uart3),
+ UNIPHIER_PINCTRL_GROUP(system_bus),
+ UNIPHIER_PINCTRL_GROUP(system_bus_cs1),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
UNIPHIER_PINCTRL_GROUP(usb0),
UNIPHIER_PINCTRL_GROUP(usb1),
UNIPHIER_PINCTRL_GROUP(usb2),
@@ -78,11 +78,11 @@
UNIPHIER_PINMUX_FUNCTION(i2c3),
UNIPHIER_PINMUX_FUNCTION(i2c4),
UNIPHIER_PINMUX_FUNCTION(nand),
- UNIPHIER_PINMUX_FUNCTION_SPL(system_bus),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart0),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart1),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart2),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart3),
+ UNIPHIER_PINMUX_FUNCTION(system_bus),
+ UNIPHIER_PINMUX_FUNCTION(uart0),
+ UNIPHIER_PINMUX_FUNCTION(uart1),
+ UNIPHIER_PINMUX_FUNCTION(uart2),
+ UNIPHIER_PINMUX_FUNCTION(uart3),
UNIPHIER_PINMUX_FUNCTION(usb0),
UNIPHIER_PINMUX_FUNCTION(usb1),
UNIPHIER_PINMUX_FUNCTION(usb2),
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
index 0b0af1c..11d5d98 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
@@ -69,12 +69,12 @@
UNIPHIER_PINCTRL_GROUP(i2c4),
UNIPHIER_PINCTRL_GROUP(nand),
UNIPHIER_PINCTRL_GROUP(sd),
- UNIPHIER_PINCTRL_GROUP_SPL(system_bus),
- UNIPHIER_PINCTRL_GROUP_SPL(system_bus_cs1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart0),
- UNIPHIER_PINCTRL_GROUP_SPL(uart1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart2),
- UNIPHIER_PINCTRL_GROUP_SPL(uart3),
+ UNIPHIER_PINCTRL_GROUP(system_bus),
+ UNIPHIER_PINCTRL_GROUP(system_bus_cs1),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
UNIPHIER_PINCTRL_GROUP(usb0),
UNIPHIER_PINCTRL_GROUP(usb1),
UNIPHIER_PINCTRL_GROUP(usb2),
@@ -91,11 +91,11 @@
UNIPHIER_PINMUX_FUNCTION(i2c4),
UNIPHIER_PINMUX_FUNCTION(nand),
UNIPHIER_PINMUX_FUNCTION(sd),
- UNIPHIER_PINMUX_FUNCTION_SPL(system_bus),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart0),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart1),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart2),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart3),
+ UNIPHIER_PINMUX_FUNCTION(system_bus),
+ UNIPHIER_PINMUX_FUNCTION(uart0),
+ UNIPHIER_PINMUX_FUNCTION(uart1),
+ UNIPHIER_PINMUX_FUNCTION(uart2),
+ UNIPHIER_PINMUX_FUNCTION(uart3),
UNIPHIER_PINMUX_FUNCTION(usb0),
UNIPHIER_PINMUX_FUNCTION(usb1),
UNIPHIER_PINMUX_FUNCTION(usb2),
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c
index 86752d9..423e48b 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c
@@ -78,12 +78,12 @@
UNIPHIER_PINCTRL_GROUP(i2c3),
UNIPHIER_PINCTRL_GROUP(nand),
UNIPHIER_PINCTRL_GROUP(sd),
- UNIPHIER_PINCTRL_GROUP_SPL(system_bus),
- UNIPHIER_PINCTRL_GROUP_SPL(system_bus_cs1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart0),
- UNIPHIER_PINCTRL_GROUP_SPL(uart1),
- UNIPHIER_PINCTRL_GROUP_SPL(uart2),
- UNIPHIER_PINCTRL_GROUP_SPL(uart3),
+ UNIPHIER_PINCTRL_GROUP(system_bus),
+ UNIPHIER_PINCTRL_GROUP(system_bus_cs1),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
UNIPHIER_PINCTRL_GROUP(usb0),
UNIPHIER_PINCTRL_GROUP(usb1),
UNIPHIER_PINCTRL_GROUP(usb2),
@@ -102,11 +102,11 @@
UNIPHIER_PINMUX_FUNCTION(i2c3),
UNIPHIER_PINMUX_FUNCTION(nand),
UNIPHIER_PINMUX_FUNCTION(sd),
- UNIPHIER_PINMUX_FUNCTION_SPL(system_bus),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart0),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart1),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart2),
- UNIPHIER_PINMUX_FUNCTION_SPL(uart3),
+ UNIPHIER_PINMUX_FUNCTION(system_bus),
+ UNIPHIER_PINMUX_FUNCTION(uart0),
+ UNIPHIER_PINMUX_FUNCTION(uart1),
+ UNIPHIER_PINMUX_FUNCTION(uart2),
+ UNIPHIER_PINMUX_FUNCTION(uart3),
UNIPHIER_PINMUX_FUNCTION(usb0),
UNIPHIER_PINMUX_FUNCTION(usb1),
UNIPHIER_PINMUX_FUNCTION(usb2),
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f488799..f7bdfa5 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -12,7 +12,7 @@
obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
obj-$(CONFIG_PMIC_ACT8846) += act8846.o
-obj-$(CONFIG_PMIC_AS3722) += as3722.o
+obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o
obj-$(CONFIG_PMIC_MAX8997) += max8997.o
obj-$(CONFIG_PMIC_PM8916) += pm8916.o
obj-$(CONFIG_PMIC_RK8XX) += rk8xx.o
diff --git a/drivers/power/pmic/as3722.c b/drivers/power/pmic/as3722.c
index c09e1de..4efe8ee 100644
--- a/drivers/power/pmic/as3722.c
+++ b/drivers/power/pmic/as3722.c
@@ -11,253 +11,99 @@
#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
-
+#include <dm/lists.h>
#include <power/as3722.h>
+#include <power/pmic.h>
-#define AS3722_SD_VOLTAGE(n) (0x00 + (n))
-#define AS3722_GPIO_CONTROL(n) (0x08 + (n))
-#define AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH (1 << 0)
-#define AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL (7 << 0)
-#define AS3722_GPIO_CONTROL_INVERT (1 << 7)
-#define AS3722_LDO_VOLTAGE(n) (0x10 + (n))
-#define AS3722_GPIO_SIGNAL_OUT 0x20
-#define AS3722_SD_CONTROL 0x4d
-#define AS3722_LDO_CONTROL 0x4e
-#define AS3722_ASIC_ID1 0x90
-#define AS3722_DEVICE_ID 0x0c
-#define AS3722_ASIC_ID2 0x91
+#define AS3722_NUM_OF_REGS 0x92
-int as3722_read(struct udevice *pmic, u8 reg, u8 *value)
+static int as3722_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
{
- int err;
+ int ret;
- err = dm_i2c_read(pmic, reg, value, 1);
- if (err < 0)
- return err;
+ ret = dm_i2c_read(dev, reg, buff, len);
+ if (ret < 0)
+ return ret;
return 0;
}
-int as3722_write(struct udevice *pmic, u8 reg, u8 value)
+static int as3722_write(struct udevice *dev, uint reg, const uint8_t *buff,
+ int len)
{
- int err;
+ int ret;
- err = dm_i2c_write(pmic, reg, &value, 1);
- if (err < 0)
- return err;
+ ret = dm_i2c_write(dev, reg, buff, len);
+ if (ret < 0)
+ return ret;
return 0;
}
-static int as3722_read_id(struct udevice *pmic, u8 *id, u8 *revision)
+static int as3722_read_id(struct udevice *dev, uint *idp, uint *revisionp)
{
- int err;
+ int ret;
- err = as3722_read(pmic, AS3722_ASIC_ID1, id);
- if (err) {
- error("failed to read ID1 register: %d", err);
- return err;
+ ret = pmic_reg_read(dev, AS3722_ASIC_ID1);
+ if (ret < 0) {
+ error("failed to read ID1 register: %d", ret);
+ return ret;
}
+ *idp = ret;
- err = as3722_read(pmic, AS3722_ASIC_ID2, revision);
- if (err) {
- error("failed to read ID2 register: %d", err);
- return err;
+ ret = pmic_reg_read(dev, AS3722_ASIC_ID2);
+ if (ret < 0) {
+ error("failed to read ID2 register: %d", ret);
+ return ret;
}
+ *revisionp = ret;
return 0;
}
-int as3722_sd_enable(struct udevice *pmic, unsigned int sd)
+/* TODO(treding@nvidia.com): Add proper regulator support to avoid this */
+int as3722_sd_set_voltage(struct udevice *dev, unsigned int sd, u8 value)
{
- u8 value;
- int err;
+ int ret;
if (sd > 6)
return -EINVAL;
- err = as3722_read(pmic, AS3722_SD_CONTROL, &value);
- if (err) {
- error("failed to read SD control register: %d", err);
- return err;
- }
-
- value |= 1 << sd;
-
- err = as3722_write(pmic, AS3722_SD_CONTROL, value);
- if (err < 0) {
- error("failed to write SD control register: %d", err);
- return err;
+ ret = pmic_reg_write(dev, AS3722_SD_VOLTAGE(sd), value);
+ if (ret < 0) {
+ error("failed to write SD%u voltage register: %d", sd, ret);
+ return ret;
}
return 0;
}
-int as3722_sd_set_voltage(struct udevice *pmic, unsigned int sd, u8 value)
+int as3722_ldo_set_voltage(struct udevice *dev, unsigned int ldo, u8 value)
{
- int err;
-
- if (sd > 6)
- return -EINVAL;
-
- err = as3722_write(pmic, AS3722_SD_VOLTAGE(sd), value);
- if (err < 0) {
- error("failed to write SD%u voltage register: %d", sd, err);
- return err;
- }
-
- return 0;
-}
-
-int as3722_ldo_enable(struct udevice *pmic, unsigned int ldo)
-{
- u8 value;
- int err;
+ int ret;
if (ldo > 11)
return -EINVAL;
- err = as3722_read(pmic, AS3722_LDO_CONTROL, &value);
- if (err) {
- error("failed to read LDO control register: %d", err);
- return err;
- }
-
- value |= 1 << ldo;
-
- err = as3722_write(pmic, AS3722_LDO_CONTROL, value);
- if (err < 0) {
- error("failed to write LDO control register: %d", err);
- return err;
- }
-
- return 0;
-}
-
-int as3722_ldo_set_voltage(struct udevice *pmic, unsigned int ldo, u8 value)
-{
- int err;
-
- if (ldo > 11)
- return -EINVAL;
-
- err = as3722_write(pmic, AS3722_LDO_VOLTAGE(ldo), value);
- if (err < 0) {
+ ret = pmic_reg_write(dev, AS3722_LDO_VOLTAGE(ldo), value);
+ if (ret < 0) {
error("failed to write LDO%u voltage register: %d", ldo,
- err);
- return err;
+ ret);
+ return ret;
}
return 0;
}
-int as3722_gpio_configure(struct udevice *pmic, unsigned int gpio,
- unsigned long flags)
+static int as3722_probe(struct udevice *dev)
{
- u8 value = 0;
- int err;
+ uint id, revision;
+ int ret;
- if (flags & AS3722_GPIO_OUTPUT_VDDH)
- value |= AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
-
- if (flags & AS3722_GPIO_INVERT)
- value |= AS3722_GPIO_CONTROL_INVERT;
-
- err = as3722_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
- if (err) {
- error("failed to configure GPIO#%u: %d", gpio, err);
- return err;
- }
-
- return 0;
-}
-
-static int as3722_gpio_set(struct udevice *pmic, unsigned int gpio,
- unsigned int level)
-{
- const char *l;
- u8 value;
- int err;
-
- if (gpio > 7)
- return -EINVAL;
-
- err = as3722_read(pmic, AS3722_GPIO_SIGNAL_OUT, &value);
- if (err < 0) {
- error("failed to read GPIO signal out register: %d", err);
- return err;
- }
-
- if (level == 0) {
- value &= ~(1 << gpio);
- l = "low";
- } else {
- value |= 1 << gpio;
- l = "high";
- }
-
- err = as3722_write(pmic, AS3722_GPIO_SIGNAL_OUT, value);
- if (err) {
- error("failed to set GPIO#%u %s: %d", gpio, l, err);
- return err;
- }
-
- return 0;
-}
-
-int as3722_gpio_direction_output(struct udevice *pmic, unsigned int gpio,
- unsigned int level)
-{
- u8 value;
- int err;
-
- if (gpio > 7)
- return -EINVAL;
-
- if (level == 0)
- value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL;
- else
- value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
-
- err = as3722_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
- if (err) {
- error("failed to configure GPIO#%u as output: %d", gpio, err);
- return err;
- }
-
- err = as3722_gpio_set(pmic, gpio, level);
- if (err < 0) {
- error("failed to set GPIO#%u high: %d", gpio, err);
- return err;
- }
-
- return 0;
-}
-
-/* Temporary function until we get the pmic framework */
-int as3722_get(struct udevice **devp)
-{
- int bus = 0;
- int address = 0x40;
-
- return i2c_get_chip_for_busnum(bus, address, 1, devp);
-}
-
-int as3722_init(struct udevice **devp)
-{
- struct udevice *pmic;
- u8 id, revision;
- const unsigned int bus = 0;
- const unsigned int address = 0x40;
- int err;
-
- err = i2c_get_chip_for_busnum(bus, address, 1, &pmic);
- if (err)
- return err;
- err = as3722_read_id(pmic, &id, &revision);
- if (err < 0) {
- error("failed to read ID: %d", err);
- return err;
+ ret = as3722_read_id(dev, &id, &revision);
+ if (ret < 0) {
+ error("failed to read ID: %d", ret);
+ return ret;
}
if (id != AS3722_DEVICE_ID) {
@@ -265,10 +111,68 @@
return -ENOENT;
}
- debug("AS3722 revision %#x found on I2C bus %u, address %#x\n",
- revision, bus, address);
- if (devp)
- *devp = pmic;
+ debug("AS3722 revision %#x found on I2C bus %s\n", revision, dev->name);
return 0;
}
+
+#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
+static const struct pmic_child_info pmic_children_info[] = {
+ { .prefix = "sd", .driver = "as3722_stepdown"},
+ { .prefix = "ldo", .driver = "as3722_ldo"},
+ { },
+};
+
+static int as3722_bind(struct udevice *dev)
+{
+ struct udevice *gpio_dev;
+ ofnode regulators_node;
+ int children;
+ int ret;
+
+ regulators_node = dev_read_subnode(dev, "regulators");
+ if (!ofnode_valid(regulators_node)) {
+ debug("%s: %s regulators subnode not found\n", __func__,
+ dev->name);
+ return -ENXIO;
+ }
+
+ children = pmic_bind_children(dev, regulators_node, pmic_children_info);
+ if (!children)
+ debug("%s: %s - no child found\n", __func__, dev->name);
+ ret = device_bind_driver(dev, "gpio_as3722", "gpio_as3722", &gpio_dev);
+ if (ret) {
+ debug("%s: Cannot bind GPIOs (ret=%d)\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static int as3722_reg_count(struct udevice *dev)
+{
+ return AS3722_NUM_OF_REGS;
+}
+
+static struct dm_pmic_ops as3722_ops = {
+ .reg_count = as3722_reg_count,
+ .read = as3722_read,
+ .write = as3722_write,
+};
+
+static const struct udevice_id as3722_ids[] = {
+ { .compatible = "ams,as3722" },
+ { }
+};
+
+U_BOOT_DRIVER(pmic_as3722) = {
+ .name = "as3722_pmic",
+ .id = UCLASS_PMIC,
+ .of_match = as3722_ids,
+#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
+ .bind = as3722_bind,
+#endif
+ .probe = as3722_probe,
+ .ops = &as3722_ops,
+};
diff --git a/drivers/power/pmic/as3722_gpio.c b/drivers/power/pmic/as3722_gpio.c
new file mode 100644
index 0000000..d0b681c
--- /dev/null
+++ b/drivers/power/pmic/as3722_gpio.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2014 NVIDIA Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <power/as3722.h>
+#include <power/pmic.h>
+
+#define NUM_GPIOS 8
+
+int as3722_gpio_configure(struct udevice *pmic, unsigned int gpio,
+ unsigned long flags)
+{
+ u8 value = 0;
+ int err;
+
+ if (flags & AS3722_GPIO_OUTPUT_VDDH)
+ value |= AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
+
+ if (flags & AS3722_GPIO_INVERT)
+ value |= AS3722_GPIO_CONTROL_INVERT;
+
+ err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
+ if (err) {
+ error("failed to configure GPIO#%u: %d", gpio, err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int as3722_gpio_set_value(struct udevice *dev, unsigned int gpio,
+ int level)
+{
+ struct udevice *pmic = dev_get_parent(dev);
+ const char *l;
+ u8 value;
+ int err;
+
+ if (gpio >= NUM_GPIOS)
+ return -EINVAL;
+
+ err = pmic_reg_read(pmic, AS3722_GPIO_SIGNAL_OUT);
+ if (err < 0) {
+ error("failed to read GPIO signal out register: %d", err);
+ return err;
+ }
+ value = err;
+
+ if (level == 0) {
+ value &= ~(1 << gpio);
+ l = "low";
+ } else {
+ value |= 1 << gpio;
+ l = "high";
+ }
+
+ err = pmic_reg_write(pmic, AS3722_GPIO_SIGNAL_OUT, value);
+ if (err) {
+ error("failed to set GPIO#%u %s: %d", gpio, l, err);
+ return err;
+ }
+
+ return 0;
+}
+
+int as3722_gpio_direction_output(struct udevice *dev, unsigned int gpio,
+ int value)
+{
+ struct udevice *pmic = dev_get_parent(dev);
+ int err;
+
+ if (gpio > 7)
+ return -EINVAL;
+
+ if (value == 0)
+ value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL;
+ else
+ value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
+
+ err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
+ if (err) {
+ error("failed to configure GPIO#%u as output: %d", gpio, err);
+ return err;
+ }
+
+ err = as3722_gpio_set_value(pmic, gpio, value);
+ if (err < 0) {
+ error("failed to set GPIO#%u high: %d", gpio, err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int as3722_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ uc_priv->gpio_count = NUM_GPIOS;
+ uc_priv->bank_name = "as3722_";
+
+ return 0;
+}
+
+static const struct dm_gpio_ops gpio_as3722_ops = {
+ .direction_output = as3722_gpio_direction_output,
+ .set_value = as3722_gpio_set_value,
+};
+
+U_BOOT_DRIVER(gpio_as3722) = {
+ .name = "gpio_as3722",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_as3722_ops,
+ .probe = as3722_gpio_probe,
+};
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index f213487..c82a936 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -34,6 +34,15 @@
by the PMIC device. This driver is controlled by a device tree node
which includes voltage limits.
+config REGULATOR_AS3722
+ bool "Enable driver for AS7322 regulator"
+ depends on DM_REGULATOR && PMIC_AS3722
+ help
+ Enable support for the regulator functions of the AS3722. The
+ driver implements enable/disable for step-down bucks and LDOs,
+ but does not yet support change voltages. Currently this must be
+ done using direct register writes to the PMIC.
+
config DM_REGULATOR_PFUZE100
bool "Enable Driver Model for REGULATOR PFUZE100"
depends on DM_REGULATOR && DM_PMIC_PFUZE100
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index ce14d08..18fb870 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
+obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o
obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
diff --git a/drivers/power/regulator/as3722_regulator.c b/drivers/power/regulator/as3722_regulator.c
new file mode 100644
index 0000000..3e1e6f1
--- /dev/null
+++ b/drivers/power/regulator/as3722_regulator.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2017 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * Placeholder regulator driver for as3722.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <power/as3722.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+static int stepdown_get_value(struct udevice *dev)
+{
+ return -ENOSYS;
+}
+
+static int stepdown_set_value(struct udevice *dev, int uvolt)
+{
+ return -ENOSYS;
+}
+
+static int stepdown_set_enable(struct udevice *dev, bool enable)
+{
+ struct udevice *pmic = dev_get_parent(dev);
+ int sd = dev->driver_data;
+ int ret;
+
+ ret = pmic_clrsetbits(pmic, AS3722_SD_CONTROL, 0, 1 << sd);
+ if (ret < 0) {
+ debug("%s: failed to write SD control register: %d", __func__,
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stepdown_get_enable(struct udevice *dev)
+{
+ struct udevice *pmic = dev_get_parent(dev);
+ int sd = dev->driver_data;
+ int ret;
+
+ ret = pmic_reg_read(pmic, AS3722_SD_CONTROL);
+ if (ret < 0) {
+ debug("%s: failed to read SD control register: %d", __func__,
+ ret);
+ return ret;
+ }
+
+ return ret & (1 << sd) ? true : false;
+}
+
+static int ldo_get_value(struct udevice *dev)
+{
+ return -ENOSYS;
+}
+
+static int ldo_set_value(struct udevice *dev, int uvolt)
+{
+ return -ENOSYS;
+}
+
+static int ldo_set_enable(struct udevice *dev, bool enable)
+{
+ struct udevice *pmic = dev_get_parent(dev);
+ int ldo = dev->driver_data;
+ int ret;
+
+ ret = pmic_clrsetbits(pmic, AS3722_LDO_CONTROL, 0, 1 << ldo);
+ if (ret < 0) {
+ debug("%s: failed to write LDO control register: %d", __func__,
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ldo_get_enable(struct udevice *dev)
+{
+ struct udevice *pmic = dev_get_parent(dev);
+ int ldo = dev->driver_data;
+ int ret;
+
+ ret = pmic_reg_read(pmic, AS3722_LDO_CONTROL);
+ if (ret < 0) {
+ debug("%s: failed to read SD control register: %d", __func__,
+ ret);
+ return ret;
+ }
+
+ return ret & (1 << ldo) ? true : false;
+}
+
+static int as3722_stepdown_probe(struct udevice *dev)
+{
+ struct dm_regulator_uclass_platdata *uc_pdata;
+
+ uc_pdata = dev_get_uclass_platdata(dev);
+
+ uc_pdata->type = REGULATOR_TYPE_BUCK;
+
+ return 0;
+}
+
+static int as3722_ldo_probe(struct udevice *dev)
+{
+ struct dm_regulator_uclass_platdata *uc_pdata;
+
+ uc_pdata = dev_get_uclass_platdata(dev);
+
+ uc_pdata->type = REGULATOR_TYPE_LDO;
+
+ return 0;
+}
+
+static const struct dm_regulator_ops as3722_stepdown_ops = {
+ .get_value = stepdown_get_value,
+ .set_value = stepdown_set_value,
+ .get_enable = stepdown_get_enable,
+ .set_enable = stepdown_set_enable,
+};
+
+static const struct dm_regulator_ops as3722_ldo_ops = {
+ .get_value = ldo_get_value,
+ .set_value = ldo_set_value,
+ .get_enable = ldo_get_enable,
+ .set_enable = ldo_set_enable,
+};
+
+U_BOOT_DRIVER(as3722_stepdown) = {
+ .name = "as3722_stepdown",
+ .id = UCLASS_REGULATOR,
+ .ops = &as3722_stepdown_ops,
+ .probe = as3722_stepdown_probe,
+};
+
+U_BOOT_DRIVER(as3722_ldo) = {
+ .name = "as3722_ldo",
+ .id = UCLASS_REGULATOR,
+ .ops = &as3722_ldo_ops,
+ .probe = as3722_ldo_probe,
+};
diff --git a/drivers/power/regulator/pwm_regulator.c b/drivers/power/regulator/pwm_regulator.c
index 00a7cca..b63f941 100644
--- a/drivers/power/regulator/pwm_regulator.c
+++ b/drivers/power/regulator/pwm_regulator.c
@@ -80,18 +80,14 @@
}
ret = pwm_set_config(priv->pwm, priv->pwm_id,
- (priv->period_ns / 100) * duty_cycle, priv->period_ns);
+ priv->period_ns, (priv->period_ns / 100) * duty_cycle);
if (ret) {
dev_err(dev, "Failed to configure PWM\n");
return ret;
}
- ret = pwm_set_enable(priv->pwm, priv->pwm_id, true);
- if (ret) {
- dev_err(dev, "Failed to enable PWM\n");
- return ret;
- }
priv->volt_uV = uvolt;
+
return ret;
}
@@ -144,8 +140,6 @@
if (priv->init_voltage)
pwm_regulator_set_voltage(dev, priv->init_voltage);
- pwm_regulator_enable(dev, 1);
-
return 0;
}
diff --git a/drivers/pwm/rk_pwm.c b/drivers/pwm/rk_pwm.c
index 28de62d..2364c2d 100644
--- a/drivers/pwm/rk_pwm.c
+++ b/drivers/pwm/rk_pwm.c
@@ -29,6 +29,7 @@
struct rk_pwm_priv *priv = dev_get_priv(dev);
debug("%s: polarity=%u\n", __func__, polarity);
+ priv->enable_conf &= ~(PWM_DUTY_MASK | PWM_INACTIVE_MASK);
if (polarity)
priv->enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSTIVE;
else
diff --git a/drivers/pwm/tegra_pwm.c b/drivers/pwm/tegra_pwm.c
index d93ac28..b8acc15 100644
--- a/drivers/pwm/tegra_pwm.c
+++ b/drivers/pwm/tegra_pwm.c
@@ -59,7 +59,7 @@
{
struct tegra_pwm_priv *priv = dev_get_priv(dev);
- priv->regs = (struct pwm_ctlr *)devfdt_get_addr(dev);
+ priv->regs = (struct pwm_ctlr *)dev_read_addr(dev);
return 0;
}
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index 902de2b..b1b0289 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -10,11 +10,99 @@
#include <dm.h>
#include <ram.h>
#include <asm/io.h>
-#include <asm/arch/fmc.h>
-#include <asm/arch/stm32.h>
DECLARE_GLOBAL_DATA_PTR;
+struct stm32_fmc_regs {
+ /* 0x0 */
+ u32 bcr1; /* NOR/PSRAM Chip select control register 1 */
+ u32 btr1; /* SRAM/NOR-Flash Chip select timing register 1 */
+ u32 bcr2; /* NOR/PSRAM Chip select Control register 2 */
+ u32 btr2; /* SRAM/NOR-Flash Chip select timing register 2 */
+ u32 bcr3; /* NOR/PSRAMChip select Control register 3 */
+ u32 btr3; /* SRAM/NOR-Flash Chip select timing register 3 */
+ u32 bcr4; /* NOR/PSRAM Chip select Control register 4 */
+ u32 btr4; /* SRAM/NOR-Flash Chip select timing register 4 */
+ u32 reserved1[24];
+
+ /* 0x80 */
+ u32 pcr; /* NAND Flash control register */
+ u32 sr; /* FIFO status and interrupt register */
+ u32 pmem; /* Common memory space timing register */
+ u32 patt; /* Attribute memory space timing registers */
+ u32 reserved2[1];
+ u32 eccr; /* ECC result registers */
+ u32 reserved3[27];
+
+ /* 0x104 */
+ u32 bwtr1; /* SRAM/NOR-Flash write timing register 1 */
+ u32 reserved4[1];
+ u32 bwtr2; /* SRAM/NOR-Flash write timing register 2 */
+ u32 reserved5[1];
+ u32 bwtr3; /* SRAM/NOR-Flash write timing register 3 */
+ u32 reserved6[1];
+ u32 bwtr4; /* SRAM/NOR-Flash write timing register 4 */
+ u32 reserved7[8];
+
+ /* 0x140 */
+ u32 sdcr1; /* SDRAM Control register 1 */
+ u32 sdcr2; /* SDRAM Control register 2 */
+ u32 sdtr1; /* SDRAM Timing register 1 */
+ u32 sdtr2; /* SDRAM Timing register 2 */
+ u32 sdcmr; /* SDRAM Mode register */
+ u32 sdrtr; /* SDRAM Refresh timing register */
+ u32 sdsr; /* SDRAM Status register */
+};
+
+/*
+ * NOR/PSRAM Control register BCR1
+ * FMC controller Enable, only availabe for H7
+ */
+#define FMC_BCR1_FMCEN BIT(31)
+
+/* Control register SDCR */
+#define FMC_SDCR_RPIPE_SHIFT 13 /* RPIPE bit shift */
+#define FMC_SDCR_RBURST_SHIFT 12 /* RBURST bit shift */
+#define FMC_SDCR_SDCLK_SHIFT 10 /* SDRAM clock divisor shift */
+#define FMC_SDCR_WP_SHIFT 9 /* Write protection shift */
+#define FMC_SDCR_CAS_SHIFT 7 /* CAS latency shift */
+#define FMC_SDCR_NB_SHIFT 6 /* Number of banks shift */
+#define FMC_SDCR_MWID_SHIFT 4 /* Memory width shift */
+#define FMC_SDCR_NR_SHIFT 2 /* Number of row address bits shift */
+#define FMC_SDCR_NC_SHIFT 0 /* Number of col address bits shift */
+
+/* Timings register SDTR */
+#define FMC_SDTR_TMRD_SHIFT 0 /* Load mode register to active */
+#define FMC_SDTR_TXSR_SHIFT 4 /* Exit self-refresh time */
+#define FMC_SDTR_TRAS_SHIFT 8 /* Self-refresh time */
+#define FMC_SDTR_TRC_SHIFT 12 /* Row cycle delay */
+#define FMC_SDTR_TWR_SHIFT 16 /* Recovery delay */
+#define FMC_SDTR_TRP_SHIFT 20 /* Row precharge delay */
+#define FMC_SDTR_TRCD_SHIFT 24 /* Row-to-column delay */
+
+#define FMC_SDCMR_NRFS_SHIFT 5
+
+#define FMC_SDCMR_MODE_NORMAL 0
+#define FMC_SDCMR_MODE_START_CLOCK 1
+#define FMC_SDCMR_MODE_PRECHARGE 2
+#define FMC_SDCMR_MODE_AUTOREFRESH 3
+#define FMC_SDCMR_MODE_WRITE_MODE 4
+#define FMC_SDCMR_MODE_SELFREFRESH 5
+#define FMC_SDCMR_MODE_POWERDOWN 6
+
+#define FMC_SDCMR_BANK_1 BIT(4)
+#define FMC_SDCMR_BANK_2 BIT(3)
+
+#define FMC_SDCMR_MODE_REGISTER_SHIFT 9
+
+#define FMC_SDSR_BUSY BIT(5)
+
+#define FMC_BUSY_WAIT(regs) do { \
+ __asm__ __volatile__ ("dsb" : : : "memory"); \
+ while (regs->sdsr & FMC_SDSR_BUSY) \
+ ; \
+ } while (0)
+
struct stm32_sdram_control {
u8 no_columns;
u8 no_rows;
@@ -35,11 +123,29 @@
u8 twr;
u8 trcd;
};
-struct stm32_sdram_params {
- u8 no_sdram_banks;
- struct stm32_sdram_control sdram_control;
- struct stm32_sdram_timing sdram_timing;
+enum stm32_fmc_bank {
+ SDRAM_BANK1,
+ SDRAM_BANK2,
+ MAX_SDRAM_BANK,
+};
+
+enum stm32_fmc_family {
+ STM32F7_FMC,
+ STM32H7_FMC,
+};
+
+struct bank_params {
+ struct stm32_sdram_control *sdram_control;
+ struct stm32_sdram_timing *sdram_timing;
u32 sdram_ref_count;
+ enum stm32_fmc_bank target_bank;
+};
+
+struct stm32_sdram_params {
+ struct stm32_fmc_regs *base;
+ u8 no_sdram_banks;
+ struct bank_params bank_params[MAX_SDRAM_BANK];
+ enum stm32_fmc_family family;
};
#define SDRAM_MODE_BL_SHIFT 0
@@ -49,90 +155,179 @@
int stm32_sdram_init(struct udevice *dev)
{
struct stm32_sdram_params *params = dev_get_platdata(dev);
+ struct stm32_sdram_control *control;
+ struct stm32_sdram_timing *timing;
+ struct stm32_fmc_regs *regs = params->base;
+ enum stm32_fmc_bank target_bank;
+ u32 ctb; /* SDCMR register: Command Target Bank */
+ u32 ref_count;
+ u8 i;
- writel(params->sdram_control.sdclk << FMC_SDCR_SDCLK_SHIFT
- | params->sdram_control.cas_latency << FMC_SDCR_CAS_SHIFT
- | params->sdram_control.no_banks << FMC_SDCR_NB_SHIFT
- | params->sdram_control.memory_width << FMC_SDCR_MWID_SHIFT
- | params->sdram_control.no_rows << FMC_SDCR_NR_SHIFT
- | params->sdram_control.no_columns << FMC_SDCR_NC_SHIFT
- | params->sdram_control.rd_pipe_delay << FMC_SDCR_RPIPE_SHIFT
- | params->sdram_control.rd_burst << FMC_SDCR_RBURST_SHIFT,
- &STM32_SDRAM_FMC->sdcr1);
+ /* disable the FMC controller */
+ if (params->family == STM32H7_FMC)
+ clrbits_le32(®s->bcr1, FMC_BCR1_FMCEN);
- writel(params->sdram_timing.trcd << FMC_SDTR_TRCD_SHIFT
- | params->sdram_timing.trp << FMC_SDTR_TRP_SHIFT
- | params->sdram_timing.twr << FMC_SDTR_TWR_SHIFT
- | params->sdram_timing.trc << FMC_SDTR_TRC_SHIFT
- | params->sdram_timing.tras << FMC_SDTR_TRAS_SHIFT
- | params->sdram_timing.txsr << FMC_SDTR_TXSR_SHIFT
- | params->sdram_timing.tmrd << FMC_SDTR_TMRD_SHIFT,
- &STM32_SDRAM_FMC->sdtr1);
+ for (i = 0; i < params->no_sdram_banks; i++) {
+ control = params->bank_params[i].sdram_control;
+ timing = params->bank_params[i].sdram_timing;
+ target_bank = params->bank_params[i].target_bank;
+ ref_count = params->bank_params[i].sdram_ref_count;
- writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
- &STM32_SDRAM_FMC->sdcmr);
- udelay(200); /* 200 us delay, page 10, "Power-Up" */
- FMC_BUSY_WAIT();
+ writel(control->sdclk << FMC_SDCR_SDCLK_SHIFT
+ | control->cas_latency << FMC_SDCR_CAS_SHIFT
+ | control->no_banks << FMC_SDCR_NB_SHIFT
+ | control->memory_width << FMC_SDCR_MWID_SHIFT
+ | control->no_rows << FMC_SDCR_NR_SHIFT
+ | control->no_columns << FMC_SDCR_NC_SHIFT
+ | control->rd_pipe_delay << FMC_SDCR_RPIPE_SHIFT
+ | control->rd_burst << FMC_SDCR_RBURST_SHIFT,
+ ®s->sdcr1);
- writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_PRECHARGE,
- &STM32_SDRAM_FMC->sdcmr);
- udelay(100);
- FMC_BUSY_WAIT();
+ if (target_bank == SDRAM_BANK2)
+ writel(control->cas_latency << FMC_SDCR_CAS_SHIFT
+ | control->no_banks << FMC_SDCR_NB_SHIFT
+ | control->memory_width << FMC_SDCR_MWID_SHIFT
+ | control->no_rows << FMC_SDCR_NR_SHIFT
+ | control->no_columns << FMC_SDCR_NC_SHIFT,
+ ®s->sdcr2);
- writel((FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_AUTOREFRESH
- | 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
- udelay(100);
- FMC_BUSY_WAIT();
+ writel(timing->trcd << FMC_SDTR_TRCD_SHIFT
+ | timing->trp << FMC_SDTR_TRP_SHIFT
+ | timing->twr << FMC_SDTR_TWR_SHIFT
+ | timing->trc << FMC_SDTR_TRC_SHIFT
+ | timing->tras << FMC_SDTR_TRAS_SHIFT
+ | timing->txsr << FMC_SDTR_TXSR_SHIFT
+ | timing->tmrd << FMC_SDTR_TMRD_SHIFT,
+ ®s->sdtr1);
- writel(FMC_SDCMR_BANK_1 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
- | params->sdram_control.cas_latency << SDRAM_MODE_CAS_SHIFT)
- << FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
- &STM32_SDRAM_FMC->sdcmr);
- udelay(100);
- FMC_BUSY_WAIT();
+ if (target_bank == SDRAM_BANK2)
+ writel(timing->trcd << FMC_SDTR_TRCD_SHIFT
+ | timing->trp << FMC_SDTR_TRP_SHIFT
+ | timing->twr << FMC_SDTR_TWR_SHIFT
+ | timing->trc << FMC_SDTR_TRC_SHIFT
+ | timing->tras << FMC_SDTR_TRAS_SHIFT
+ | timing->txsr << FMC_SDTR_TXSR_SHIFT
+ | timing->tmrd << FMC_SDTR_TMRD_SHIFT,
+ ®s->sdtr2);
- writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_NORMAL,
- &STM32_SDRAM_FMC->sdcmr);
- FMC_BUSY_WAIT();
+ if (target_bank == SDRAM_BANK1)
+ ctb = FMC_SDCMR_BANK_1;
+ else
+ ctb = FMC_SDCMR_BANK_2;
- /* Refresh timer */
- writel((params->sdram_ref_count) << 1, &STM32_SDRAM_FMC->sdrtr);
+ writel(ctb | FMC_SDCMR_MODE_START_CLOCK, ®s->sdcmr);
+ udelay(200); /* 200 us delay, page 10, "Power-Up" */
+ FMC_BUSY_WAIT(regs);
+
+ writel(ctb | FMC_SDCMR_MODE_PRECHARGE, ®s->sdcmr);
+ udelay(100);
+ FMC_BUSY_WAIT(regs);
+
+ writel((ctb | FMC_SDCMR_MODE_AUTOREFRESH | 7 << FMC_SDCMR_NRFS_SHIFT),
+ ®s->sdcmr);
+ udelay(100);
+ FMC_BUSY_WAIT(regs);
+
+ writel(ctb | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
+ | control->cas_latency << SDRAM_MODE_CAS_SHIFT)
+ << FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
+ ®s->sdcmr);
+ udelay(100);
+ FMC_BUSY_WAIT(regs);
+
+ writel(ctb | FMC_SDCMR_MODE_NORMAL, ®s->sdcmr);
+ FMC_BUSY_WAIT(regs);
+
+ /* Refresh timer */
+ writel(ref_count << 1, ®s->sdrtr);
+ }
+
+ /* enable the FMC controller */
+ if (params->family == STM32H7_FMC)
+ setbits_le32(®s->bcr1, FMC_BCR1_FMCEN);
return 0;
}
static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)
{
- int ret;
- int node = dev_of_offset(dev);
- const void *blob = gd->fdt_blob;
struct stm32_sdram_params *params = dev_get_platdata(dev);
+ struct bank_params *bank_params;
+ ofnode bank_node;
+ char *bank_name;
+ u8 bank = 0;
- params->no_sdram_banks = fdtdec_get_uint(blob, node, "mr-nbanks", 1);
- debug("%s, no of banks = %d\n", __func__, params->no_sdram_banks);
+ dev_for_each_subnode(bank_node, dev) {
+ /* extract the bank index from DT */
+ bank_name = (char *)ofnode_get_name(bank_node);
+ strsep(&bank_name, "@");
+ if (!bank_name) {
+ error("missing sdram bank index");
+ return -EINVAL;
+ }
- fdt_for_each_subnode(node, blob, node) {
- ret = fdtdec_get_byte_array(blob, node, "st,sdram-control",
- (u8 *)¶ms->sdram_control,
- sizeof(params->sdram_control));
- if (ret)
- return ret;
- ret = fdtdec_get_byte_array(blob, node, "st,sdram-timing",
- (u8 *)¶ms->sdram_timing,
- sizeof(params->sdram_timing));
- if (ret)
- return ret;
+ bank_params = ¶ms->bank_params[bank];
+ strict_strtoul(bank_name, 10,
+ (long unsigned int *)&bank_params->target_bank);
- params->sdram_ref_count = fdtdec_get_int(blob, node,
+ if (bank_params->target_bank >= MAX_SDRAM_BANK) {
+ error("Found bank %d , but only bank 0 and 1 are supported",
+ bank_params->target_bank);
+ return -EINVAL;
+ }
+
+ debug("Find bank %s %u\n", bank_name, bank_params->target_bank);
+
+ params->bank_params[bank].sdram_control =
+ (struct stm32_sdram_control *)
+ ofnode_read_u8_array_ptr(bank_node,
+ "st,sdram-control",
+ sizeof(struct stm32_sdram_control));
+
+ if (!params->bank_params[bank].sdram_control) {
+ error("st,sdram-control not found for %s",
+ ofnode_get_name(bank_node));
+ return -EINVAL;
+ }
+
+
+ params->bank_params[bank].sdram_timing =
+ (struct stm32_sdram_timing *)
+ ofnode_read_u8_array_ptr(bank_node,
+ "st,sdram-timing",
+ sizeof(struct stm32_sdram_timing));
+
+ if (!params->bank_params[bank].sdram_timing) {
+ error("st,sdram-timing not found for %s",
+ ofnode_get_name(bank_node));
+ return -EINVAL;
+ }
+
+
+ bank_params->sdram_ref_count = ofnode_read_u32_default(bank_node,
"st,sdram-refcount", 8196);
+ bank++;
}
+ params->no_sdram_banks = bank;
+ debug("%s, no of banks = %d\n", __func__, params->no_sdram_banks);
+
return 0;
}
static int stm32_fmc_probe(struct udevice *dev)
{
+ struct stm32_sdram_params *params = dev_get_platdata(dev);
int ret;
+ fdt_addr_t addr;
+
+ addr = dev_read_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ params->base = (struct stm32_fmc_regs *)addr;
+ params->family = dev_get_driver_data(dev);
+
#ifdef CONFIG_CLK
struct clk clk;
@@ -164,7 +359,8 @@
};
static const struct udevice_id stm32_fmc_ids[] = {
- { .compatible = "st,stm32-fmc" },
+ { .compatible = "st,stm32-fmc", .data = STM32F7_FMC },
+ { .compatible = "st,stm32h7-fmc", .data = STM32H7_FMC },
{ }
};
diff --git a/drivers/reset/reset-uclass.c b/drivers/reset/reset-uclass.c
index de3695f..307a297 100644
--- a/drivers/reset/reset-uclass.c
+++ b/drivers/reset/reset-uclass.c
@@ -42,6 +42,7 @@
debug("%s(dev=%p, index=%d, reset_ctl=%p)\n", __func__, dev, index,
reset_ctl);
+ reset_ctl->dev = NULL;
ret = dev_read_phandle_with_args(dev, "resets", "#reset-cells", 0,
index, &args);
@@ -87,6 +88,7 @@
debug("%s(dev=%p, name=%s, reset_ctl=%p)\n", __func__, dev, name,
reset_ctl);
+ reset_ctl->dev = NULL;
index = dev_read_stringlist_search(dev, "reset-names", name);
if (index < 0) {
@@ -97,6 +99,15 @@
return reset_get_by_index(dev, index, reset_ctl);
}
+int reset_request(struct reset_ctl *reset_ctl)
+{
+ struct reset_ops *ops = reset_dev_ops(reset_ctl->dev);
+
+ debug("%s(reset_ctl=%p)\n", __func__, reset_ctl);
+
+ return ops->request(reset_ctl);
+}
+
int reset_free(struct reset_ctl *reset_ctl)
{
struct reset_ops *ops = reset_dev_ops(reset_ctl->dev);
@@ -124,6 +135,29 @@
return ops->rst_deassert(reset_ctl);
}
+int reset_release_all(struct reset_ctl *reset_ctl, int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ debug("%s(reset_ctl[%d]=%p)\n", __func__, i, &reset_ctl[i]);
+
+ /* check if reset has been previously requested */
+ if (!reset_ctl[i].dev)
+ continue;
+
+ ret = reset_assert(&reset_ctl[i]);
+ if (ret)
+ return ret;
+
+ ret = reset_free(&reset_ctl[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
UCLASS_DRIVER(reset) = {
.id = UCLASS_RESET,
.name = "reset",
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index f360534..9cae9fb 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -23,8 +23,8 @@
*/
static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
-#ifndef CONFIG_SYS_MALLOC_F_LEN
-#error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
+#if !CONFIG_VAL(SYS_MALLOC_F_LEN)
+#error "Serial is required before relocation - define CONFIG_$(SPL_)SYS_MALLOC_F_LEN to make this work"
#endif
static int serial_check_stdout(const void *blob, struct udevice **devp)
diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c
index 61e8167..bf118a7 100644
--- a/drivers/serial/serial_stm32x7.c
+++ b/drivers/serial/serial_stm32x7.c
@@ -11,7 +11,6 @@
#include <asm/io.h>
#include <serial.h>
#include <asm/arch/stm32.h>
-#include <dm/platform_data/serial_stm32x7.h>
#include "serial_stm32x7.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -20,16 +19,9 @@
{
struct stm32x7_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
- u32 clock, int_div, mantissa, fraction, oversampling;
+ u32 int_div, mantissa, fraction, oversampling;
- if (((u32)usart & STM32_BUS_MASK) == APB1_PERIPH_BASE)
- clock = clock_get(CLOCK_APB1);
- else if (((u32)usart & STM32_BUS_MASK) == APB2_PERIPH_BASE)
- clock = clock_get(CLOCK_APB2);
- else
- return -EINVAL;
-
- int_div = DIV_ROUND_CLOSEST(clock, baudrate);
+ int_div = DIV_ROUND_CLOSEST(plat->clock_rate, baudrate);
if (int_div < 16) {
oversampling = 8;
@@ -102,6 +94,12 @@
}
#endif
+ plat->clock_rate = clk_get_rate(&clk);
+ if (plat->clock_rate < 0) {
+ clk_disable(&clk);
+ return plat->clock_rate;
+ };
+
/* Disable usart-> disable overrun-> enable usart */
clrbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
setbits_le32(&usart->cr3, USART_CR3_OVRDIS);
diff --git a/drivers/serial/serial_stm32x7.h b/drivers/serial/serial_stm32x7.h
index facfdba..9fe37af 100644
--- a/drivers/serial/serial_stm32x7.h
+++ b/drivers/serial/serial_stm32x7.h
@@ -22,6 +22,11 @@
u32 tx_dr;
};
+/* Information about a serial port */
+struct stm32x7_serial_platdata {
+ struct stm32_usart *base; /* address of registers in physical memory */
+ unsigned long int clock_rate;
+};
#define USART_CR1_OVER8 (1 << 15)
#define USART_CR1_TE (1 << 3)
diff --git a/drivers/spi/stm32_qspi.c b/drivers/spi/stm32_qspi.c
index f0434a4..ef2b64e 100644
--- a/drivers/spi/stm32_qspi.c
+++ b/drivers/spi/stm32_qspi.c
@@ -165,6 +165,7 @@
struct stm32_qspi_priv {
struct stm32_qspi_regs *regs;
+ ulong clock_rate;
u32 max_hz;
u32 mode;
@@ -471,6 +472,13 @@
dev_err(bus, "failed to enable clock\n");
return ret;
}
+
+ priv->clock_rate = clk_get_rate(&clk);
+ if (priv->clock_rate < 0) {
+ clk_disable(&clk);
+ return priv->clock_rate;
+ }
+
#endif
setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
@@ -536,7 +544,7 @@
if (speed > plat->max_hz)
speed = plat->max_hz;
- u32 qspi_clk = clock_get(CLOCK_AHB);
+ u32 qspi_clk = priv->clock_rate;
u32 prescaler = 255;
if (speed > 0) {
prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1;
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
index 9165934..04b4fce 100644
--- a/drivers/spi/tegra114_spi.c
+++ b/drivers/spi/tegra114_spi.c
@@ -12,7 +12,6 @@
#include <asm/arch/clock.h>
#include <asm/arch-tegra/clk_rst.h>
#include <spi.h>
-#include <fdtdec.h>
#include "tegra_spi.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -100,11 +99,9 @@
static int tegra114_spi_ofdata_to_platdata(struct udevice *bus)
{
struct tegra_spi_platdata *plat = bus->platdata;
- const void *blob = gd->fdt_blob;
- int node = dev_of_offset(bus);
- plat->base = devfdt_get_addr(bus);
- plat->periph_id = clock_decode_periph_id(blob, node);
+ plat->base = dev_read_addr(bus);
+ plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
debug("%s: could not decode periph id %d\n", __func__,
@@ -113,10 +110,10 @@
}
/* Use 500KHz as a suitable default */
- plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
- 500000);
- plat->deactivate_delay_us = fdtdec_get_int(blob, node,
- "spi-deactivate-delay", 0);
+ plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
+ 500000);
+ plat->deactivate_delay_us = dev_read_u32_default(bus,
+ "spi-deactivate-delay", 0);
debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
__func__, plat->base, plat->periph_id, plat->frequency,
plat->deactivate_delay_us);
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
index 299e1b4..e70210d 100644
--- a/drivers/spi/tegra20_sflash.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -91,7 +91,7 @@
int node = dev_of_offset(bus);
plat->base = devfdt_get_addr(bus);
- plat->periph_id = clock_decode_periph_id(blob, node);
+ plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
debug("%s: could not decode periph id %d\n", __func__,
diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c
index 4cbde7b..f242574 100644
--- a/drivers/spi/tegra20_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -97,7 +97,7 @@
int node = dev_of_offset(bus);
plat->base = devfdt_get_addr(bus);
- plat->periph_id = clock_decode_periph_id(blob, node);
+ plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
debug("%s: could not decode periph id %d\n", __func__,
diff --git a/drivers/spi/tegra210_qspi.c b/drivers/spi/tegra210_qspi.c
index 6d0b5da..2a35a58 100644
--- a/drivers/spi/tegra210_qspi.c
+++ b/drivers/spi/tegra210_qspi.c
@@ -100,7 +100,7 @@
int node = dev_of_offset(bus);
plat->base = devfdt_get_addr(bus);
- plat->periph_id = clock_decode_periph_id(blob, node);
+ plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
debug("%s: could not decode periph id %d\n", __func__,
diff --git a/drivers/usb/emul/sandbox_hub.c b/drivers/usb/emul/sandbox_hub.c
index 9ffda9c..1432858 100644
--- a/drivers/usb/emul/sandbox_hub.c
+++ b/drivers/usb/emul/sandbox_hub.c
@@ -96,7 +96,12 @@
1 << 7),
.bPwrOn2PwrGood = 2,
.bHubContrCurrent = 5,
- .DeviceRemovable = {0, 0xff}, /* all ports removeable */
+ {
+ {
+ /* all ports removeable */
+ .DeviceRemovable = {0, 0xff}
+ }
+ }
#if SANDBOX_NUM_PORTS > 8
#error "This code sets up an incorrect mask"
#endif
diff --git a/drivers/usb/gadget/f_thor.c b/drivers/usb/gadget/f_thor.c
index a60e948..cd4d9e6 100644
--- a/drivers/usb/gadget/f_thor.c
+++ b/drivers/usb/gadget/f_thor.c
@@ -891,6 +891,7 @@
}
if (dev->out_ep->driver_data) {
+ free(dev->out_req->buf);
dev->out_req->buf = NULL;
usb_ep_free_request(dev->out_ep, dev->out_req);
usb_ep_disable(dev->out_ep);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index bc2c1f1..67ad72b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -31,6 +31,13 @@
SoCs, which includes Armada8K, Armada3700 and other Armada
family SoCs.
+config USB_XHCI_PCI
+ bool "Support for PCI-based xHCI USB controller"
+ depends on DM_USB
+ default y if X86
+ help
+ Enables support for the PCI-based xHCI controller.
+
config USB_XHCI_ROCKCHIP
bool "Support for Rockchip on-chip xHCI USB controller"
depends on ARCH_ROCKCHIP
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
index fb78462..03f8d32 100644
--- a/drivers/usb/host/ehci-generic.c
+++ b/drivers/usb/host/ehci-generic.c
@@ -6,6 +6,8 @@
#include <common.h>
#include <clk.h>
+#include <dm/ofnode.h>
+#include <generic-phy.h>
#include <reset.h>
#include <asm/io.h>
#include <dm.h>
@@ -18,43 +20,143 @@
*/
struct generic_ehci {
struct ehci_ctrl ctrl;
+ struct clk *clocks;
+ struct reset_ctl *resets;
+ struct phy phy;
+ int clock_count;
+ int reset_count;
};
static int ehci_usb_probe(struct udevice *dev)
{
+ struct generic_ehci *priv = dev_get_priv(dev);
struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
- int i;
+ int i, err, ret, clock_nb, reset_nb;
- for (i = 0; ; i++) {
- struct clk clk;
- int ret;
+ err = 0;
+ priv->clock_count = 0;
+ clock_nb = ofnode_count_phandle_with_args(dev_ofnode(dev), "clocks",
+ "#clock-cells");
+ if (clock_nb > 0) {
+ priv->clocks = devm_kcalloc(dev, clock_nb, sizeof(struct clk),
+ GFP_KERNEL);
+ if (!priv->clocks)
+ return -ENOMEM;
- ret = clk_get_by_index(dev, i, &clk);
- if (ret < 0)
- break;
- if (clk_enable(&clk))
- printf("failed to enable clock %d\n", i);
- clk_free(&clk);
+ for (i = 0; i < clock_nb; i++) {
+ err = clk_get_by_index(dev, i, &priv->clocks[i]);
+
+ if (err < 0)
+ break;
+ err = clk_enable(&priv->clocks[i]);
+ if (err) {
+ error("failed to enable clock %d\n", i);
+ clk_free(&priv->clocks[i]);
+ goto clk_err;
+ }
+ priv->clock_count++;
+ }
+ } else {
+ if (clock_nb != -ENOENT) {
+ error("failed to get clock phandle(%d)\n", clock_nb);
+ return clock_nb;
+ }
}
- for (i = 0; ; i++) {
- struct reset_ctl reset;
- int ret;
+ priv->reset_count = 0;
+ reset_nb = ofnode_count_phandle_with_args(dev_ofnode(dev), "resets",
+ "#reset-cells");
+ if (reset_nb > 0) {
+ priv->resets = devm_kcalloc(dev, reset_nb,
+ sizeof(struct reset_ctl),
+ GFP_KERNEL);
+ if (!priv->resets)
+ return -ENOMEM;
- ret = reset_get_by_index(dev, i, &reset);
- if (ret < 0)
- break;
- if (reset_deassert(&reset))
- printf("failed to deassert reset %d\n", i);
- reset_free(&reset);
+ for (i = 0; i < reset_nb; i++) {
+ err = reset_get_by_index(dev, i, &priv->resets[i]);
+ if (err < 0)
+ break;
+
+ if (reset_deassert(&priv->resets[i])) {
+ error("failed to deassert reset %d\n", i);
+ reset_free(&priv->resets[i]);
+ goto reset_err;
+ }
+ priv->reset_count++;
+ }
+ } else {
+ if (reset_nb != -ENOENT) {
+ error("failed to get reset phandle(%d)\n", reset_nb);
+ goto clk_err;
+ }
+ }
+
+ err = generic_phy_get_by_index(dev, 0, &priv->phy);
+ if (err) {
+ if (err != -ENOENT) {
+ error("failed to get usb phy\n");
+ goto reset_err;
+ }
+ } else {
+
+ err = generic_phy_init(&priv->phy);
+ if (err) {
+ error("failed to init usb phy\n");
+ goto reset_err;
+ }
}
hccr = map_physmem(devfdt_get_addr(dev), 0x100, MAP_NOCACHE);
hcor = (struct ehci_hcor *)((uintptr_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
- return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
+ err = ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
+ if (err)
+ goto phy_err;
+
+ return 0;
+
+phy_err:
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret)
+ error("failed to release phy\n");
+ }
+
+reset_err:
+ ret = reset_release_all(priv->resets, priv->reset_count);
+ if (ret)
+ error("failed to assert all resets\n");
+clk_err:
+ ret = clk_release_all(priv->clocks, priv->clock_count);
+ if (ret)
+ error("failed to disable all clocks\n");
+
+ return err;
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+ struct generic_ehci *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = ehci_deregister(dev);
+ if (ret)
+ return ret;
+
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret)
+ return ret;
+ }
+
+ ret = reset_release_all(priv->resets, priv->reset_count);
+ if (ret)
+ return ret;
+
+ return clk_release_all(priv->clocks, priv->clock_count);
}
static const struct udevice_id ehci_usb_ids[] = {
@@ -67,7 +169,7 @@
.id = UCLASS_USB,
.of_match = ehci_usb_ids,
.probe = ehci_usb_probe,
- .remove = ehci_deregister,
+ .remove = ehci_usb_remove,
.ops = &ehci_usb_ops,
.priv_auto_alloc_size = sizeof(struct generic_ehci),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 13aa70d..3243c1d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -52,8 +52,8 @@
0, /* wHubCharacteristics */
10, /* bPwrOn2PwrGood */
0, /* bHubCntrCurrent */
- {}, /* Device removable */
- {} /* at most 7 ports! XXX */
+ { /* Device removable */
+ } /* at most 7 ports! XXX */
},
{
0x12, /* bLength */
@@ -148,9 +148,12 @@
static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
{
- if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+ int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
+
+ if (port < 0 || port >= max_ports) {
/* Printing the message would cause a scan failure! */
- debug("The request port(%u) is not configured\n", port);
+ debug("The request port(%u) exceeds maximum port number\n",
+ port);
return NULL;
}
@@ -205,6 +208,7 @@
{
int i, ret = 0;
uint32_t cmd, reg;
+ int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
if (!ctrl || !ctrl->hcor)
return -EINVAL;
@@ -219,7 +223,7 @@
100 * 1000);
if (!ret) {
- for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) {
+ for (i = 0; i < max_ports; i++) {
reg = ehci_readl(&ctrl->hcor->or_portsc[i]);
reg |= EHCI_PS_SUSP;
ehci_writel(&ctrl->hcor->or_portsc[i], reg);
@@ -937,7 +941,7 @@
return -1;
}
-const struct ehci_ops default_ehci_ops = {
+static const struct ehci_ops default_ehci_ops = {
.set_usb_mode = ehci_set_usbmode,
.get_port_speed = ehci_get_port_speed,
.powerup_fixup = ehci_powerup_fixup,
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 7dc37f0..1c72330 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -17,7 +17,6 @@
#include <usb.h>
#include <usb/ulpi.h>
#include <libfdt.h>
-#include <fdtdec.h>
#include "ehci.h"
@@ -695,12 +694,11 @@
static int fdt_decode_usb(struct udevice *dev, struct fdt_usb *config)
{
- const void *blob = gd->fdt_blob;
- int node = dev_of_offset(dev);
const char *phy, *mode;
- config->reg = (struct usb_ctlr *)devfdt_get_addr(dev);
- mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ config->reg = (struct usb_ctlr *)dev_read_addr(dev);
+ debug("reg=%p\n", config->reg);
+ mode = dev_read_string(dev, "dr_mode");
if (mode) {
if (0 == strcmp(mode, "host"))
config->dr_mode = DR_MODE_HOST;
@@ -717,28 +715,24 @@
config->dr_mode = DR_MODE_HOST;
}
- phy = fdt_getprop(blob, node, "phy_type", NULL);
+ phy = dev_read_string(dev, "phy_type");
config->utmi = phy && 0 == strcmp("utmi", phy);
config->ulpi = phy && 0 == strcmp("ulpi", phy);
- config->enabled = fdtdec_get_is_enabled(blob, node);
- config->has_legacy_mode = fdtdec_get_bool(blob, node,
- "nvidia,has-legacy-mode");
- config->periph_id = clock_decode_periph_id(blob, node);
+ config->has_legacy_mode = dev_read_bool(dev, "nvidia,has-legacy-mode");
+ config->periph_id = clock_decode_periph_id(dev);
if (config->periph_id == PERIPH_ID_NONE) {
debug("%s: Missing/invalid peripheral ID\n", __func__);
return -EINVAL;
}
- gpio_request_by_name_nodev(offset_to_ofnode(node), "nvidia,vbus-gpio",
- 0, &config->vbus_gpio, GPIOD_IS_OUT);
- gpio_request_by_name_nodev(offset_to_ofnode(node),
- "nvidia,phy-reset-gpio", 0,
- &config->phy_reset_gpio, GPIOD_IS_OUT);
- debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
- "vbus=%d, phy_reset=%d, dr_mode=%d\n",
- config->enabled, config->has_legacy_mode, config->utmi,
- config->ulpi, config->periph_id,
- gpio_get_number(&config->vbus_gpio),
- gpio_get_number(&config->phy_reset_gpio), config->dr_mode);
+ gpio_request_by_name(dev, "nvidia,vbus-gpio", 0, &config->vbus_gpio,
+ GPIOD_IS_OUT);
+ gpio_request_by_name(dev, "nvidia,phy-reset-gpio", 0,
+ &config->phy_reset_gpio, GPIOD_IS_OUT);
+ debug("legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, vbus=%d, phy_reset=%d, dr_mode=%d, reg=%p\n",
+ config->has_legacy_mode, config->utmi, config->ulpi,
+ config->periph_id, gpio_get_number(&config->vbus_gpio),
+ gpio_get_number(&config->phy_reset_gpio), config->dr_mode,
+ config->reg);
return 0;
}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2ab830d..7c39bec 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -11,9 +11,8 @@
#include <usb.h>
-#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-#endif
+/* Section 2.2.3 - N_PORTS */
+#define MAX_HC_PORTS 15
/*
* Register Space.
@@ -62,7 +61,7 @@
uint32_t _reserved_1_[6];
uint32_t or_configflag;
#define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
- uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
+ uint32_t or_portsc[MAX_HC_PORTS];
#define PORTSC_PSPD(x) (((x) >> 26) & 0x3)
#define PORTSC_PSPD_FS 0x0
#define PORTSC_PSPD_LS 0x1
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
index f85738f..e22ee97 100644
--- a/drivers/usb/host/ohci-generic.c
+++ b/drivers/usb/host/ohci-generic.c
@@ -5,7 +5,11 @@
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
+#include <dm/ofnode.h>
+#include <generic-phy.h>
+#include <reset.h>
#include "ohci.h"
#if !defined(CONFIG_USB_OHCI_NEW)
@@ -14,18 +18,133 @@
struct generic_ohci {
ohci_t ohci;
+ struct clk *clocks; /* clock list */
+ struct reset_ctl *resets; /* reset list */
+ struct phy phy;
+ int clock_count; /* number of clock in clock list */
+ int reset_count; /* number of reset in reset list */
};
static int ohci_usb_probe(struct udevice *dev)
{
struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
+ struct generic_ohci *priv = dev_get_priv(dev);
+ int i, err, ret, clock_nb, reset_nb;
- return ohci_register(dev, regs);
+ err = 0;
+ priv->clock_count = 0;
+ clock_nb = dev_count_phandle_with_args(dev, "clocks", "#clock-cells");
+ if (clock_nb > 0) {
+ priv->clocks = devm_kcalloc(dev, clock_nb, sizeof(struct clk),
+ GFP_KERNEL);
+ if (!priv->clocks)
+ return -ENOMEM;
+
+ for (i = 0; i < clock_nb; i++) {
+ err = clk_get_by_index(dev, i, &priv->clocks[i]);
+ if (err < 0)
+ break;
+
+ err = clk_enable(&priv->clocks[i]);
+ if (err) {
+ error("failed to enable clock %d\n", i);
+ clk_free(&priv->clocks[i]);
+ goto clk_err;
+ }
+ priv->clock_count++;
+ }
+ } else if (clock_nb != -ENOENT) {
+ error("failed to get clock phandle(%d)\n", clock_nb);
+ return clock_nb;
+ }
+
+ priv->reset_count = 0;
+ reset_nb = dev_count_phandle_with_args(dev, "resets", "#reset-cells");
+ if (reset_nb > 0) {
+ priv->resets = devm_kcalloc(dev, reset_nb,
+ sizeof(struct reset_ctl),
+ GFP_KERNEL);
+ if (!priv->resets)
+ return -ENOMEM;
+
+ for (i = 0; i < reset_nb; i++) {
+ err = reset_get_by_index(dev, i, &priv->resets[i]);
+ if (err < 0)
+ break;
+
+ err = reset_deassert(&priv->resets[i]);
+ if (err) {
+ error("failed to deassert reset %d\n", i);
+ reset_free(&priv->resets[i]);
+ goto reset_err;
+ }
+ priv->reset_count++;
+ }
+ } else if (reset_nb != -ENOENT) {
+ error("failed to get reset phandle(%d)\n", reset_nb);
+ goto clk_err;
+ }
+
+ err = generic_phy_get_by_index(dev, 0, &priv->phy);
+ if (err) {
+ if (err != -ENOENT) {
+ error("failed to get usb phy\n");
+ goto reset_err;
+ }
+ } else {
+
+ err = generic_phy_init(&priv->phy);
+ if (err) {
+ error("failed to init usb phy\n");
+ goto reset_err;
+ }
+ }
+
+ err = ohci_register(dev, regs);
+ if (err)
+ goto phy_err;
+
+ return 0;
+
+phy_err:
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret)
+ error("failed to release phy\n");
+ }
+
+reset_err:
+ ret = reset_release_all(priv->resets, priv->reset_count);
+ if (ret)
+ error("failed to assert all resets\n");
+clk_err:
+ ret = clk_release_all(priv->clocks, priv->clock_count);
+ if (ret)
+ error("failed to disable all clocks\n");
+
+ return err;
}
static int ohci_usb_remove(struct udevice *dev)
{
- return ohci_deregister(dev);
+ struct generic_ohci *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = ohci_deregister(dev);
+ if (ret)
+ return ret;
+
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret)
+ return ret;
+ }
+
+ ret = reset_release_all(priv->resets, priv->reset_count);
+ if (ret)
+ return ret;
+
+ return clk_release_all(priv->clocks, priv->clock_count);
}
static const struct udevice_id ohci_usb_ids[] = {
diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c
index 110ddc9..0b8a501 100644
--- a/drivers/usb/host/usb-uclass.c
+++ b/drivers/usb/host/usb-uclass.c
@@ -139,6 +139,17 @@
return ops->reset_root_port(bus, udev);
}
+int usb_update_hub_device(struct usb_device *udev)
+{
+ struct udevice *bus = udev->controller_dev;
+ struct dm_usb_ops *ops = usb_get_ops(bus);
+
+ if (!ops->update_hub_device)
+ return -ENOSYS;
+
+ return ops->update_hub_device(bus, udev);
+}
+
int usb_stop(void)
{
struct udevice *bus;
@@ -177,7 +188,6 @@
#ifdef CONFIG_USB_STORAGE
usb_stor_reset();
#endif
- usb_hub_reset();
uc_priv->companion_device_count = 0;
usb_started = 0;
@@ -230,7 +240,6 @@
int ret;
asynch_allowed = 1;
- usb_hub_reset();
ret = uclass_get(UCLASS_USB, &uc);
if (ret)
@@ -373,8 +382,8 @@
}
/* returns 0 if no match, 1 if match */
-int usb_match_device(const struct usb_device_descriptor *desc,
- const struct usb_device_id *id)
+static int usb_match_device(const struct usb_device_descriptor *desc,
+ const struct usb_device_id *id)
{
if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
id->idVendor != le16_to_cpu(desc->idVendor))
@@ -410,9 +419,9 @@
}
/* returns 0 if no match, 1 if match */
-int usb_match_one_id_intf(const struct usb_device_descriptor *desc,
- const struct usb_interface_descriptor *int_desc,
- const struct usb_device_id *id)
+static int usb_match_one_id_intf(const struct usb_device_descriptor *desc,
+ const struct usb_interface_descriptor *int_desc,
+ const struct usb_device_id *id)
{
/* The interface class, subclass, protocol and number should never be
* checked for a match if the device class is Vendor Specific,
@@ -445,9 +454,9 @@
}
/* returns 0 if no match, 1 if match */
-int usb_match_one_id(struct usb_device_descriptor *desc,
- struct usb_interface_descriptor *int_desc,
- const struct usb_device_id *id)
+static int usb_match_one_id(struct usb_device_descriptor *desc,
+ struct usb_interface_descriptor *int_desc,
+ const struct usb_device_id *id)
{
if (!usb_match_device(desc, id))
return 0;
@@ -680,7 +689,7 @@
return change;
}
-int usb_child_post_bind(struct udevice *dev)
+static int usb_child_post_bind(struct udevice *dev)
{
struct usb_dev_platdata *plat = dev_get_parent_platdata(dev);
int val;
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 33961cd..4191a89 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -9,8 +9,21 @@
*/
#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <generic-phy.h>
+#include <usb.h>
+
+#include "xhci.h"
#include <asm/io.h>
#include <linux/usb/dwc3.h>
+#include <linux/usb/otg.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct xhci_dwc3_platdata {
+ struct phy usb_phy;
+};
void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
{
@@ -19,7 +32,7 @@
DWC3_GCTL_PRTCAPDIR(mode));
}
-void dwc3_phy_reset(struct dwc3 *dwc3_reg)
+static void dwc3_phy_reset(struct dwc3 *dwc3_reg)
{
/* Assert USB3 PHY reset */
setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
@@ -97,3 +110,79 @@
setbits_le32(&dwc3_reg->g_fladj, GFLADJ_30MHZ_REG_SEL |
GFLADJ_30MHZ(val));
}
+
+#ifdef CONFIG_DM_USB
+static int xhci_dwc3_probe(struct udevice *dev)
+{
+ struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
+ struct xhci_hcor *hcor;
+ struct xhci_hccr *hccr;
+ struct dwc3 *dwc3_reg;
+ enum usb_dr_mode dr_mode;
+ int ret;
+
+ hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
+ hcor = (struct xhci_hcor *)((uintptr_t)hccr +
+ HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
+
+ ret = generic_phy_get_by_index(dev, 0, &plat->usb_phy);
+ if (ret) {
+ if (ret != -ENOENT) {
+ error("Failed to get USB PHY for %s\n", dev->name);
+ return ret;
+ }
+ } else {
+ ret = generic_phy_init(&plat->usb_phy);
+ if (ret) {
+ error("Can't init USB PHY for %s\n", dev->name);
+ return ret;
+ }
+ }
+
+ dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
+
+ dwc3_core_init(dwc3_reg);
+
+ dr_mode = usb_get_dr_mode(dev_of_offset(dev));
+ if (dr_mode == USB_DR_MODE_UNKNOWN)
+ /* by default set dual role mode to HOST */
+ dr_mode = USB_DR_MODE_HOST;
+
+ dwc3_set_mode(dwc3_reg, dr_mode);
+
+ return xhci_register(dev, hccr, hcor);
+}
+
+static int xhci_dwc3_remove(struct udevice *dev)
+{
+ struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
+ int ret;
+
+ if (generic_phy_valid(&plat->usb_phy)) {
+ ret = generic_phy_exit(&plat->usb_phy);
+ if (ret) {
+ error("Can't deinit USB PHY for %s\n", dev->name);
+ return ret;
+ }
+ }
+
+ return xhci_deregister(dev);
+}
+
+static const struct udevice_id xhci_dwc3_ids[] = {
+ { .compatible = "snps,dwc3" },
+ { }
+};
+
+U_BOOT_DRIVER(xhci_dwc3) = {
+ .name = "xhci-dwc3",
+ .id = UCLASS_USB,
+ .of_match = xhci_dwc3_ids,
+ .probe = xhci_dwc3_probe,
+ .remove = xhci_dwc3_remove,
+ .ops = &xhci_usb_ops,
+ .priv_auto_alloc_size = sizeof(struct xhci_ctrl),
+ .platdata_auto_alloc_size = sizeof(struct xhci_dwc3_platdata),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 62db51d..d5eab3a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -96,6 +96,25 @@
}
/**
+ * Free the scratchpad buffer array and scratchpad buffers
+ *
+ * @ctrl host controller data structure
+ * @return none
+ */
+static void xhci_scratchpad_free(struct xhci_ctrl *ctrl)
+{
+ if (!ctrl->scratchpad)
+ return;
+
+ ctrl->dcbaa->dev_context_ptrs[0] = 0;
+
+ free((void *)(uintptr_t)ctrl->scratchpad->sp_array[0]);
+ free(ctrl->scratchpad->sp_array);
+ free(ctrl->scratchpad);
+ ctrl->scratchpad = NULL;
+}
+
+/**
* frees the "xhci_container_ctx" pointer passed
*
* @param ptr pointer to "xhci_container_ctx" to be freed
@@ -155,6 +174,7 @@
{
xhci_ring_free(ctrl->event_ring);
xhci_ring_free(ctrl->cmd_ring);
+ xhci_scratchpad_free(ctrl);
xhci_free_virt_devices(ctrl);
free(ctrl->erst.entries);
free(ctrl->dcbaa);
@@ -320,6 +340,70 @@
}
/**
+ * Set up the scratchpad buffer array and scratchpad buffers
+ *
+ * @ctrl host controller data structure
+ * @return -ENOMEM if buffer allocation fails, 0 on success
+ */
+static int xhci_scratchpad_alloc(struct xhci_ctrl *ctrl)
+{
+ struct xhci_hccr *hccr = ctrl->hccr;
+ struct xhci_hcor *hcor = ctrl->hcor;
+ struct xhci_scratchpad *scratchpad;
+ int num_sp;
+ uint32_t page_size;
+ void *buf;
+ int i;
+
+ num_sp = HCS_MAX_SCRATCHPAD(xhci_readl(&hccr->cr_hcsparams2));
+ if (!num_sp)
+ return 0;
+
+ scratchpad = malloc(sizeof(*scratchpad));
+ if (!scratchpad)
+ goto fail_sp;
+ ctrl->scratchpad = scratchpad;
+
+ scratchpad->sp_array = xhci_malloc(num_sp * sizeof(u64));
+ if (!scratchpad->sp_array)
+ goto fail_sp2;
+ ctrl->dcbaa->dev_context_ptrs[0] =
+ cpu_to_le64((uintptr_t)scratchpad->sp_array);
+
+ page_size = xhci_readl(&hcor->or_pagesize) & 0xffff;
+ for (i = 0; i < 16; i++) {
+ if ((0x1 & page_size) != 0)
+ break;
+ page_size = page_size >> 1;
+ }
+ BUG_ON(i == 16);
+
+ page_size = 1 << (i + 12);
+ buf = memalign(page_size, num_sp * page_size);
+ if (!buf)
+ goto fail_sp3;
+ memset(buf, '\0', num_sp * page_size);
+ xhci_flush_cache((uintptr_t)buf, num_sp * page_size);
+
+ for (i = 0; i < num_sp; i++) {
+ uintptr_t ptr = (uintptr_t)buf + i * page_size;
+ scratchpad->sp_array[i] = cpu_to_le64(ptr);
+ }
+
+ return 0;
+
+fail_sp3:
+ free(scratchpad->sp_array);
+
+fail_sp2:
+ free(scratchpad);
+ ctrl->scratchpad = NULL;
+
+fail_sp:
+ return -ENOMEM;
+}
+
+/**
* Allocates the Container context
*
* @param ctrl Host controller data structure
@@ -499,6 +583,9 @@
xhci_writeq(&ctrl->ir_set->erst_base, val_64);
+ /* set up the scratchpad buffer array and scratchpad buffers */
+ xhci_scratchpad_alloc(ctrl);
+
/* initializing the virtual devices to NULL */
for (i = 0; i < MAX_HC_SLOTS; ++i)
ctrl->devs[i] = NULL;
@@ -626,14 +713,21 @@
* @param udev pointer to the Device Data Structure
* @return returns negative value on failure else 0 on success
*/
-void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, int slot_id,
- int speed, int hop_portnr)
+void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl,
+ struct usb_device *udev, int hop_portnr)
{
struct xhci_virt_device *virt_dev;
struct xhci_ep_ctx *ep0_ctx;
struct xhci_slot_ctx *slot_ctx;
u32 port_num = 0;
u64 trb_64 = 0;
+ int slot_id = udev->slot_id;
+ int speed = udev->speed;
+ int route = 0;
+#ifdef CONFIG_DM_USB
+ struct usb_device *dev = udev;
+ struct usb_hub_device *hub;
+#endif
virt_dev = ctrl->devs[slot_id];
@@ -644,7 +738,32 @@
slot_ctx = xhci_get_slot_ctx(ctrl, virt_dev->in_ctx);
/* Only the control endpoint is valid - one endpoint context */
- slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | 0);
+ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+
+#ifdef CONFIG_DM_USB
+ /* Calculate the route string for this device */
+ port_num = dev->portnr;
+ while (!usb_hub_is_root_hub(dev->dev)) {
+ hub = dev_get_uclass_priv(dev->dev);
+ /*
+ * Each hub in the topology is expected to have no more than
+ * 15 ports in order for the route string of a device to be
+ * unique. SuperSpeed hubs are restricted to only having 15
+ * ports, but FS/LS/HS hubs are not. The xHCI specification
+ * says that if the port number the device is greater than 15,
+ * that portion of the route string shall be set to 15.
+ */
+ if (port_num > 15)
+ port_num = 15;
+ route |= port_num << (hub->hub_depth * 4);
+ dev = dev_get_parent_priv(dev->dev);
+ port_num = dev->portnr;
+ dev = dev_get_parent_priv(dev->dev->parent);
+ }
+
+ debug("route string %x\n", route);
+#endif
+ slot_ctx->dev_info |= route;
switch (speed) {
case USB_SPEED_SUPER:
@@ -664,6 +783,20 @@
BUG();
}
+#ifdef CONFIG_DM_USB
+ /* Set up TT fields to support FS/LS devices */
+ if (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) {
+ dev = dev_get_parent_priv(udev->dev);
+ if (dev->speed == USB_SPEED_HIGH) {
+ hub = dev_get_uclass_priv(udev->dev);
+ if (hub->tt.multi)
+ slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+ slot_ctx->tt_info |= cpu_to_le32(TT_PORT(udev->portnr));
+ slot_ctx->tt_info |= cpu_to_le32(TT_SLOT(dev->slot_id));
+ }
+ }
+#endif
+
port_num = hop_portnr;
debug("port_num = %d\n", port_num);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 63daaa6..e4a0ef4 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -8,66 +8,10 @@
#include <common.h>
#include <dm.h>
-#include <errno.h>
#include <pci.h>
#include <usb.h>
-
#include "xhci.h"
-#ifndef CONFIG_DM_USB
-
-/*
- * Create the appropriate control structures to manage a new XHCI host
- * controller.
- */
-int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,
- struct xhci_hcor **ret_hcor)
-{
- struct xhci_hccr *hccr;
- struct xhci_hcor *hcor;
- pci_dev_t pdev;
- uint32_t cmd;
- int len;
-
- pdev = pci_find_class(PCI_CLASS_SERIAL_USB_XHCI, index);
- if (pdev < 0) {
- printf("XHCI host controller not found\n");
- return -1;
- }
-
- hccr = (struct xhci_hccr *)pci_map_bar(pdev,
- PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
- len = HC_LENGTH(xhci_readl(&hccr->cr_capbase));
- hcor = (struct xhci_hcor *)((uint32_t)hccr + len);
-
- debug("XHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
- (uint32_t)hccr, (uint32_t)hcor, len);
-
- *ret_hccr = hccr;
- *ret_hcor = hcor;
-
- /* enable busmaster */
- pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER;
- pci_write_config_dword(pdev, PCI_COMMAND, cmd);
-
- return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding * to the XHCI host
- * controller
- */
-void xhci_hcd_stop(int index)
-{
-}
-
-#else
-
-struct xhci_pci_priv {
- struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
-};
-
static void xhci_pci_init(struct udevice *dev, struct xhci_hccr **ret_hccr,
struct xhci_hcor **ret_hcor)
{
@@ -103,17 +47,6 @@
return xhci_register(dev, hccr, hcor);
}
-static int xhci_pci_remove(struct udevice *dev)
-{
- int ret;
-
- ret = xhci_deregister(dev);
- if (ret)
- return ret;
-
- return 0;
-}
-
static const struct udevice_id xhci_pci_ids[] = {
{ .compatible = "xhci-pci" },
{ }
@@ -123,11 +56,11 @@
.name = "xhci_pci",
.id = UCLASS_USB,
.probe = xhci_pci_probe,
- .remove = xhci_pci_remove,
+ .remove = xhci_deregister,
.of_match = xhci_pci_ids,
.ops = &xhci_usb_ops,
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
- .priv_auto_alloc_size = sizeof(struct xhci_pci_priv),
+ .priv_auto_alloc_size = sizeof(struct xhci_ctrl),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
@@ -137,5 +70,3 @@
};
U_BOOT_PCI_DEVICE(xhci_pci, xhci_pci_supported);
-
-#endif /* CONFIG_DM_USB */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 2675a8f..579e670 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -280,8 +280,15 @@
fields[0] = lower_32_bits(val_64);
fields[1] = upper_32_bits(val_64);
fields[2] = 0;
- fields[3] = TRB_TYPE(cmd) | EP_ID_FOR_TRB(ep_index) |
- SLOT_ID_FOR_TRB(slot_id) | ctrl->cmd_ring->cycle_state;
+ fields[3] = TRB_TYPE(cmd) | SLOT_ID_FOR_TRB(slot_id) |
+ ctrl->cmd_ring->cycle_state;
+
+ /*
+ * Only 'reset endpoint', 'stop endpoint' and 'set TR dequeue pointer'
+ * commands need endpoint id encoded.
+ */
+ if (cmd >= TRB_RESET_EP && cmd <= TRB_SET_DEQ)
+ fields[3] |= EP_ID_FOR_TRB(ep_index);
queue_trb(ctrl, ctrl->cmd_ring, false, fields);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3201177..9b82ee5 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -50,8 +50,8 @@
cpu_to_le16(0x8), /* wHubCharacteristics */
10, /* bPwrOn2PwrGood */
0, /* bHubCntrCurrent */
- {}, /* Device removable */
- {} /* at most 7 ports! XXX */
+ { /* Device removable */
+ } /* at most 7 ports! XXX */
},
{
0x12, /* bLength */
@@ -192,7 +192,7 @@
* @param hcor pointer to host controller operation registers
* @return -EBUSY if XHCI Controller is not halted else status of handshake
*/
-int xhci_reset(struct xhci_hcor *hcor)
+static int xhci_reset(struct xhci_hcor *hcor)
{
u32 cmd;
u32 state;
@@ -332,8 +332,8 @@
ifdesc = &udev->config.if_desc[0];
ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
- /* Zero the input context control */
- ctrl_ctx->add_flags = 0;
+ /* Initialize the input context control */
+ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
ctrl_ctx->drop_flags = 0;
/* EP_FLAG gives values 1 & 4 for EP1OUT and EP2IN */
@@ -415,8 +415,7 @@
* so setting up the slot context.
*/
debug("Setting up addressable devices %p\n", ctrl->dcbaa);
- xhci_setup_addressable_virt_dev(ctrl, udev->slot_id, udev->speed,
- root_portnr);
+ xhci_setup_addressable_virt_dev(ctrl, udev, root_portnr);
ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
@@ -481,7 +480,7 @@
* @param udev pointer to the Device Data Structure
* @return Returns 0 on succes else return error code on failure
*/
-int _xhci_alloc_device(struct usb_device *udev)
+static int _xhci_alloc_device(struct usb_device *udev)
{
struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
union xhci_trb *event;
@@ -668,12 +667,14 @@
uint32_t reg;
volatile uint32_t *status_reg;
struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
+ struct xhci_hccr *hccr = ctrl->hccr;
struct xhci_hcor *hcor = ctrl->hcor;
+ int max_ports = HCS_MAX_PORTS(xhci_readl(&hccr->cr_hcsparams1));
if ((req->requesttype & USB_RT_PORT) &&
- le16_to_cpu(req->index) > CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) {
- printf("The request port(%d) is not configured\n",
- le16_to_cpu(req->index) - 1);
+ le16_to_cpu(req->index) > max_ports) {
+ printf("The request port(%d) exceeds maximum port number\n",
+ le16_to_cpu(req->index) - 1);
return -EINVAL;
}
@@ -727,6 +728,7 @@
case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
switch (le16_to_cpu(req->value) >> 8) {
case USB_DT_HUB:
+ case USB_DT_SS_HUB:
debug("USB_DT_HUB config\n");
srcptr = &descriptor.hub;
srclen = 0x8;
@@ -1113,26 +1115,6 @@
#endif /* CONFIG_DM_USB */
#ifdef CONFIG_DM_USB
-/*
-static struct usb_device *get_usb_device(struct udevice *dev)
-{
- struct usb_device *udev;
-
- if (device_get_uclass_id(dev) == UCLASS_USB)
- udev = dev_get_uclass_priv(dev);
- else
- udev = dev_get_parent_priv(dev);
-
- return udev;
-}
-*/
-static bool is_root_hub(struct udevice *dev)
-{
- if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB)
- return true;
-
- return false;
-}
static int xhci_submit_control_msg(struct udevice *dev, struct usb_device *udev,
unsigned long pipe, void *buffer, int length,
@@ -1147,10 +1129,10 @@
hub = udev->dev;
if (device_get_uclass_id(hub) == UCLASS_USB_HUB) {
/* Figure out our port number on the root hub */
- if (is_root_hub(hub)) {
+ if (usb_hub_is_root_hub(hub)) {
root_portnr = udev->portnr;
} else {
- while (!is_root_hub(hub->parent))
+ while (!usb_hub_is_root_hub(hub->parent))
hub = hub->parent;
uhop = dev_get_parent_priv(hub);
root_portnr = uhop->portnr;
@@ -1188,6 +1170,64 @@
return _xhci_alloc_device(udev);
}
+static int xhci_update_hub_device(struct udevice *dev, struct usb_device *udev)
+{
+ struct xhci_ctrl *ctrl = dev_get_priv(dev);
+ struct usb_hub_device *hub = dev_get_uclass_priv(udev->dev);
+ struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_container_ctx *out_ctx;
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ int slot_id = udev->slot_id;
+ unsigned think_time;
+
+ debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
+
+ /* Ignore root hubs */
+ if (usb_hub_is_root_hub(udev->dev))
+ return 0;
+
+ virt_dev = ctrl->devs[slot_id];
+ BUG_ON(!virt_dev);
+
+ out_ctx = virt_dev->out_ctx;
+ in_ctx = virt_dev->in_ctx;
+
+ ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+ /* Initialize the input context control */
+ ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+ ctrl_ctx->drop_flags = 0;
+
+ xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size);
+
+ /* slot context */
+ xhci_slot_copy(ctrl, in_ctx, out_ctx);
+ slot_ctx = xhci_get_slot_ctx(ctrl, in_ctx);
+
+ /* Update hub related fields */
+ slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
+ if (hub->tt.multi && udev->speed == USB_SPEED_HIGH)
+ slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+ slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(udev->maxchild));
+ /*
+ * Set TT think time - convert from ns to FS bit times.
+ * Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns
+ *
+ * 0 = 8 FS bit times, 1 = 16 FS bit times,
+ * 2 = 24 FS bit times, 3 = 32 FS bit times.
+ *
+ * This field shall be 0 if the device is not a high-spped hub.
+ */
+ think_time = hub->tt.think_time;
+ if (think_time != 0)
+ think_time = (think_time / 666) - 1;
+ if (udev->speed == USB_SPEED_HIGH)
+ slot_ctx->tt_info |= cpu_to_le32(TT_THINK_TIME(think_time));
+
+ return xhci_configure_endpoints(udev, false);
+}
+
int xhci_register(struct udevice *dev, struct xhci_hccr *hccr,
struct xhci_hcor *hcor)
{
@@ -1240,6 +1280,7 @@
.bulk = xhci_submit_bulk_msg,
.interrupt = xhci_submit_int_msg,
.alloc_device = xhci_alloc_device,
+ .update_hub_device = xhci_update_hub_device,
};
#endif
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2afa386..a497d9d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -30,7 +30,7 @@
/* Max number of USB devices for any host controller - limit in section 6.1 */
#define MAX_HC_SLOTS 256
/* Section 5.3.3 - MaxPorts */
-#define MAX_HC_PORTS 127
+#define MAX_HC_PORTS 255
/* Up to 16 ms to halt an HC */
#define XHCI_MAX_HALT_USEC (16*1000)
@@ -102,8 +102,8 @@
#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
#define HCS_MAX_PORTS_SHIFT 24
-#define HCS_MAX_PORTS_MASK (0x7f << HCS_MAX_PORTS_SHIFT)
-#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
+#define HCS_MAX_PORTS_MASK (0xff << HCS_MAX_PORTS_SHIFT)
+#define HCS_MAX_PORTS(p) (((p) >> 24) & 0xff)
/* HCSPARAMS2 - hcs_params2 - bitmasks */
/* bits 0:3, frames or uframes that SW needs to queue transactions
@@ -111,9 +111,10 @@
#define HCS_IST(p) (((p) >> 0) & 0xf)
/* bits 4:7, max number of Event Ring segments */
#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
/* HCSPARAMS3 - hcs_params3 - bitmasks */
/* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -171,9 +172,7 @@
volatile uint64_t or_dcbaap;
volatile uint32_t or_config;
volatile uint32_t reserved_2[241];
- struct xhci_hcor_port_regs portregs[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS];
-
- uint32_t reserved_4[CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS * 254];
+ struct xhci_hcor_port_regs portregs[MAX_HC_PORTS];
};
/* USBCMD - USB command - command bitmasks */
@@ -482,10 +481,9 @@
* @type: Type of context. Used to calculated offsets to contained contexts.
* @size: Size of the context data
* @bytes: The raw context data given to HW
- * @dma: dma address of the bytes
*
* Represents either a Device or Input context. Holds a pointer to the raw
- * memory used for the context (bytes) and dma address of it (dma).
+ * memory used for the context (bytes).
*/
struct xhci_container_ctx {
unsigned type;
@@ -550,12 +548,12 @@
* The Slot ID of the hub that isolates the high speed signaling from
* this low or full-speed device. '0' if attached to root hub port.
*/
-#define TT_SLOT (0xff)
+#define TT_SLOT(p) (((p) & 0xff) << 0)
/*
* The number of the downstream facing port of the high-speed hub
* '0' if the device is not low or full speed.
*/
-#define TT_PORT (0xff << 8)
+#define TT_PORT(p) (((p) & 0xff) << 8)
#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
/* dev_state bitmasks */
@@ -1038,6 +1036,10 @@
unsigned int erst_size;
};
+struct xhci_scratchpad {
+ u64 *sp_array;
+};
+
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1225,6 +1227,7 @@
struct xhci_intr_reg *ir_set;
struct xhci_erst erst;
struct xhci_erst_entry entry[ERST_NUM_SEGS];
+ struct xhci_scratchpad *scratchpad;
struct xhci_virt_device *devs[MAX_HC_SLOTS];
int rootdev;
};
@@ -1244,8 +1247,8 @@
void xhci_slot_copy(struct xhci_ctrl *ctrl,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx);
-void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, int slot_id,
- int speed, int hop_portnr);
+void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl,
+ struct usb_device *udev, int hop_portnr);
void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr,
u32 slot_id, u32 ep_index, trb_type cmd);
void xhci_acknowledge_event(struct xhci_ctrl *ctrl);
diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c
index 47752b2..4164fa1 100644
--- a/drivers/video/tegra124/display.c
+++ b/drivers/video/tegra124/display.c
@@ -12,7 +12,6 @@
#include <errno.h>
#include <display.h>
#include <edid.h>
-#include <fdtdec.h>
#include <lcd.h>
#include <video.h>
#include <asm/gpio.h>
@@ -334,7 +333,6 @@
{
struct display_plat *disp_uc_plat;
struct dc_ctlr *dc_ctlr;
- const void *blob = gd->fdt_blob;
struct udevice *dp_dev;
const int href_to_sync = 1, vref_to_sync = 1;
int panel_bpp = 18; /* default 18 bits per pixel */
@@ -363,9 +361,8 @@
return ret;
}
- dc_ctlr = (struct dc_ctlr *)fdtdec_get_addr(blob, dev_of_offset(dev),
- "reg");
- if (fdtdec_decode_display_timing(blob, dev_of_offset(dev), 0, timing)) {
+ dc_ctlr = (struct dc_ctlr *)dev_read_addr(dev);
+ if (ofnode_decode_display_timing(dev_ofnode(dev), 0, timing)) {
debug("%s: Failed to decode display timing\n", __func__);
return -EINVAL;
}
@@ -416,6 +413,7 @@
debug("dc: failed to update window\n");
return ret;
}
+ debug("%s: ready\n", __func__);
return 0;
}
diff --git a/drivers/video/tegra124/dp.c b/drivers/video/tegra124/dp.c
index c38b3e5..95d743d 100644
--- a/drivers/video/tegra124/dp.c
+++ b/drivers/video/tegra124/dp.c
@@ -10,7 +10,6 @@
#include <dm.h>
#include <div64.h>
#include <errno.h>
-#include <fdtdec.h>
#include <video_bridge.h>
#include <asm/io.h>
#include <asm/arch-tegra/dc.h>
@@ -1572,7 +1571,7 @@
{
struct tegra_dp_plat *plat = dev_get_platdata(dev);
- plat->base = devfdt_get_addr(dev);
+ plat->base = dev_read_addr(dev);
return 0;
}
diff --git a/drivers/video/tegra124/sor.c b/drivers/video/tegra124/sor.c
index 4324071..700ab25 100644
--- a/drivers/video/tegra124/sor.c
+++ b/drivers/video/tegra124/sor.c
@@ -7,9 +7,9 @@
#include <common.h>
#include <dm.h>
#include <errno.h>
-#include <fdtdec.h>
#include <malloc.h>
#include <panel.h>
+#include <syscon.h>
#include <video_bridge.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
@@ -759,15 +759,12 @@
const struct display_timing *timing)
{
struct tegra_dc_sor_data *sor = dev_get_priv(dev);
- const void *blob = gd->fdt_blob;
struct dc_ctlr *disp_ctrl;
u32 reg_val;
- int node;
/* Use the first display controller */
debug("%s\n", __func__);
- node = dev_of_offset(dc_dev);
- disp_ctrl = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ disp_ctrl = (struct dc_ctlr *)dev_read_addr(dc_dev);
tegra_dc_sor_enable_dc(disp_ctrl);
tegra_dc_sor_config_panel(sor, 0, link_cfg, timing);
@@ -974,16 +971,13 @@
{
struct tegra_dc_sor_data *sor = dev_get_priv(dev);
int dc_reg_ctx[DC_REG_SAVE_SPACE];
- const void *blob = gd->fdt_blob;
struct dc_ctlr *disp_ctrl;
unsigned long dc_int_mask;
- int node;
int ret;
debug("%s\n", __func__);
/* Use the first display controller */
- node = dev_of_offset(dc_dev);
- disp_ctrl = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ disp_ctrl = (struct dc_ctlr *)dev_read_addr(dev);
/* Sleep mode */
tegra_sor_writel(sor, SUPER_STATE1, SUPER_STATE1_ASY_HEAD_OP_SLEEP |
@@ -1050,18 +1044,13 @@
static int tegra_sor_ofdata_to_platdata(struct udevice *dev)
{
struct tegra_dc_sor_data *priv = dev_get_priv(dev);
- const void *blob = gd->fdt_blob;
- int node;
int ret;
- priv->base = (void *)fdtdec_get_addr(blob, dev_of_offset(dev), "reg");
+ priv->base = (void *)dev_read_addr(dev);
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_PMC);
- if (node < 0) {
- debug("%s: Cannot find PMC\n", __func__);
- return -ENOENT;
- }
- priv->pmc_base = (void *)fdtdec_get_addr(blob, node, "reg");
+ priv->pmc_base = (void *)syscon_get_first_range(TEGRA_SYSCON_PMC);
+ if (IS_ERR(priv->pmc_base))
+ return PTR_ERR(priv->pmc_base);
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "nvidia,panel",
&priv->panel);
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index fb90be9..86bf656 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -88,7 +88,7 @@
#endif
unsigned int timebase_h;
unsigned int timebase_l;
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
unsigned long malloc_base; /* base address of early malloc() */
unsigned long malloc_limit; /* limit address */
unsigned long malloc_ptr; /* current address */
diff --git a/include/clk.h b/include/clk.h
index 5a5c2ff..c5988f7 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -98,6 +98,21 @@
* @return 0 if OK, or a negative error code.
*/
int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk);
+
+/**
+ * clk_release_all() - Disable (turn off)/Free an array of previously
+ * requested clocks.
+ *
+ * For each clock contained in the clock array, this function will check if
+ * clock has been previously requested and then will disable and free it.
+ *
+ * @clk: A clock struct array that was previously successfully
+ * requested by clk_request/get_by_*().
+ * @count Number of clock contained in the array
+ * @return zero on success, or -ve error code.
+ */
+int clk_release_all(struct clk *clk, int count);
+
#else
static inline int clk_get_by_index(struct udevice *dev, int index,
struct clk *clk)
@@ -110,6 +125,12 @@
{
return -ENOSYS;
}
+
+static inline int clk_release_all(struct clk *clk, int count)
+{
+ return -ENOSYS;
+}
+
#endif
/**
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 0a2bcb2..32c5932 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -560,7 +560,6 @@
#define CONFIG_USB_EHCI_PCI
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_PCI_EHCI_DEVICE 0
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index a91b7df..70e7473 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -82,7 +82,6 @@
#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 9216998..9976686 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -92,7 +92,6 @@
/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST
diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index c1cf413..120ac02 100644
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -83,7 +83,6 @@
/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index f6e0743..7a61107 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -60,7 +60,6 @@
/* USB support */
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 69706d2..8a4c333 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -56,7 +56,6 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
/* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 76 /* HSIC2 HUB #RESET */
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index ed1a228..0150727 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -94,9 +94,6 @@
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91_WANTS_COMMON_PHY
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 8566bdc..b509151 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -154,7 +154,6 @@
/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB2PHY2_HOST
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index a209e6f..c1e9346 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -68,7 +68,6 @@
#if 0
#undef CONFIG_DM_USB
#define CONFIG_USB_XHCI_PCI
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
#if !defined(CONFIG_USB_XHCI_HCD)
diff --git a/include/configs/duovero.h b/include/configs/duovero.h
index 8efcc94..c4496a7 100644
--- a/include/configs/duovero.h
+++ b/include/configs/duovero.h
@@ -25,8 +25,6 @@
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
/* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 378219d..3b73bbc 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -134,9 +134,6 @@
/* Enable Time Command */
/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
diff --git a/include/configs/firefly-rk3288.h b/include/configs/firefly-rk3288.h
index bd39111..d6bb9f6 100644
--- a/include/configs/firefly-rk3288.h
+++ b/include/configs/firefly-rk3288.h
@@ -8,9 +8,10 @@
#define __CONFIG_H
#define ROCKCHIP_DEVICE_SETTINGS \
- "stdin=serial,cros-ec-keyb\0" \
+ "stdin=serial,usbkbd\0" \
"stdout=serial,vidconsole\0" \
- "stderr=serial,vidconsole\0"
+ "stderr=serial,vidconsole\0" \
+ "preboot=usb start\0"
#include <configs/rk3288_common.h>
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index 7e45549..a438a1a 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -15,9 +15,18 @@
/* Platform type */
#define CONFIG_SOC_K2E
+#ifdef CONFIG_TI_SECURE_DEVICE
+#define DEFAULT_SEC_BOOT_ENV \
+ DEFAULT_FIT_TI_ARGS \
+ "findfdt=setenv fdtfile ${name_fdt}\0"
+#else
+#define DEFAULT_SEC_BOOT_ENV
+#endif
+
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
+ DEFAULT_SEC_BOOT_ENV \
"boot=ubi\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index b0b4206..1117e5e 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -23,6 +23,7 @@
DEFAULT_MMC_TI_ARGS \
DEFAULT_PMMC_BOOT_ENV \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
+ DEFAULT_FIT_TI_ARGS \
"boot=mmc\0" \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
@@ -51,11 +52,27 @@
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
"name_fs=arago-base-tisdk-image-k2g-evm.cpio\0"
+#ifndef CONFIG_TI_SECURE_DEVICE
#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
"run envboot; " \
- "run set_name_pmmc init_${boot} init_fw_rd_${boot} " \
- "get_pmmc_${boot} run_pmmc get_mon_${boot} run_mon " \
- "findfdt get_fdt_${boot} get_kern_${boot} run_kern"
+ "run init_${boot}; " \
+ "run get_mon_${boot} run_mon; " \
+ "run set_name_pmmc get_pmmc_${boot} run_pmmc; " \
+ "run get_kern_${boot}; " \
+ "run init_fw_rd_${boot}; " \
+ "run get_fdt_${boot}; " \
+ "run run_kern"
+#else
+#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+ "run envboot; " \
+ "run run_mon_hs; " \
+ "run init_${boot}; " \
+ "run set_name_pmmc get_pmmc_${boot} run_pmmc; " \
+ "run get_fit_${boot}; " \
+ "bootm ${fit_loadaddr}#${name_fdt}"
+#endif
/* SPL SPI Loader Configuration */
#define CONFIG_SPL_TEXT_BASE 0x0c080000
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 78b901f..dc0ac7d 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -15,9 +15,18 @@
/* Platform type */
#define CONFIG_SOC_K2HK
+#ifdef CONFIG_TI_SECURE_DEVICE
+#define DEFAULT_SEC_BOOT_ENV \
+ DEFAULT_FIT_TI_ARGS \
+ "findfdt=setenv fdtfile ${name_fdt}\0"
+#else
+#define DEFAULT_SEC_BOOT_ENV
+#endif
+
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
+ DEFAULT_SEC_BOOT_ENV \
"boot=ubi\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index f6f88e8..6b1ba57 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -39,7 +39,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
#define CONFIG_CMD_MEMINFO
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 9e6c7a7..bebb0df 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -124,7 +124,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
/* MMC */
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 0705bc5..32c8cec 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -27,7 +27,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
/*
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 1f2eb52..58f893f 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -26,7 +26,6 @@
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 251a66e..83e7e7a 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -413,7 +413,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
/*
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index b9e5cdb..0aa6fdd 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -50,7 +50,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
#define CONFIG_SYS_CLK_FREQ 100000000
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 415a705..0897da1 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -377,7 +377,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
/*
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 59e7760..617a712 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -288,7 +288,6 @@
#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
#endif
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index ea99676..bb3d941 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -144,7 +144,6 @@
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 20a5e7f..8c72291 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -220,7 +220,6 @@
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 929ae32..66936c4 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -446,7 +446,6 @@
#define CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#include <asm/fsl_secure_boot.h>
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 0be4c4f..744a789 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -346,7 +346,6 @@
#define CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#undef CONFIG_CMDLINE_EDITING
#include <config_distro_defaults.h>
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index 2744efb..7c28a94 100644
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -96,7 +96,6 @@
* USB
*/
#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB device */
#define CONFIG_USB_ETHER
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 73fdfbd..3f5fdab 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -74,7 +74,6 @@
/* EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
index ae95485..6ea607d 100644
--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -20,7 +20,8 @@
#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,serial\0" \
"stdout=vidconsole,serial\0" \
- "stderr=vidconsole,serial\0"
+ "stderr=vidconsole,serial\0" \
+ "usb_pgood_delay=40\0"
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index 778cc9e..1307d21 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -93,14 +93,7 @@
#define CONFIG_NET_RETRY_COUNT 50
#define CONFIG_PHY_MARVELL
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
-/* USB 3.0 */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
-
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
- CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
/* USB ethernet */
#define CONFIG_USB_HOST_ETHER
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 53db10f..86ae19c 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -97,14 +97,7 @@
#define CONFIG_ARP_TIMEOUT 200
#define CONFIG_NET_RETRY_COUNT 50
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
-/* USB 3.0 */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
-
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
- CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
/* USB ethernet */
#define CONFIG_USB_HOST_ETHER
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 9ae3d18..8338d6d 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -195,7 +195,6 @@
#define CONFIG_SYS_NAND_LARGEPAGE
/* EHCI driver */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#define CONFIG_EHCI_IS_TDI
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_EHCI_MXC
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 9552c96..563854d 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -184,7 +184,6 @@
/* USB */
#define CONFIG_USB_EHCI_EXYNOS
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 4422d5e..2fc6693 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -58,7 +58,6 @@
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 834822d..133069a 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -41,7 +41,6 @@
/* USB EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* commands to include */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index a973ce6..9951980 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -17,8 +17,6 @@
*/
/* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index eb5e6df..9b65009 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -51,7 +51,6 @@
#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
/* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 88f841d..a14739f 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -97,9 +97,6 @@
#define CONFIG_RESET_PHY_R
#define CONFIG_AT91_WANTS_COMMON_PHY
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
diff --git a/include/configs/poplar.h b/include/configs/poplar.h
index d59f32a..d2ecd0d 100644
--- a/include/configs/poplar.h
+++ b/include/configs/poplar.h
@@ -30,7 +30,6 @@
#define CONFIG_PL01X_SERIAL
/* USB configuration */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_USB_HOST_ETHER
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 7f9f0c5..906c821 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -63,6 +63,4 @@
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-/* xhci host */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 54ea97b..3317887 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -16,8 +16,6 @@
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
#if defined(CONFIG_SPL_SPI_SUPPORT)
#define CONFIG_SPL_SPI_LOAD
#endif
@@ -82,7 +80,4 @@
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_RTL8152
-/* rockchip xhci host driver */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-
#endif
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
index 0573571..29a492d 100644
--- a/include/configs/rockchip-common.h
+++ b/include/configs/rockchip-common.h
@@ -28,6 +28,12 @@
#endif
#define CONFIG_RANDOM_UUID
+
+#ifdef CONFIG_ARM64
+#define ROOT_UUID "B921B045-1DF0-41C3-AF44-4C6F280D3FAE;\0"
+#else
+#define ROOT_UUID "69DAD710-2CE4-4E3C-B16C-21A1D49ABED3;\0"
+#endif
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};" \
@@ -36,7 +42,7 @@
"name=loader2,size=4MB,uuid=${uuid_gpt_loader2};" \
"name=atf,size=4M,uuid=${uuid_gpt_atf};" \
"name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};" \
- "name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
+ "name=rootfs,size=-,uuid="ROOT_UUID
#endif
diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index b25be97..401f198 100644
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -65,10 +65,6 @@
/* USB */
#define CONFIG_CMD_USB
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#endif
-
/* USB device */
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index 2c5f264..47dd991 100644
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -60,9 +60,6 @@
#define CONFIG_TFTP_PORT
#define CONFIG_TFTP_TSIZE
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-
/* MMC */
#define CONFIG_GENERIC_ATMEL_MCI
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index fefd58f..681c91c 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -310,7 +310,6 @@
#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_OHCI_SUNXI
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif
#ifdef CONFIG_USB_MUSB_SUNXI
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a9991fc..fb173eb 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -67,7 +67,6 @@
115200}
/* EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* commands to include */
#define CONFIG_CMD_NAND /* NAND support */
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 38f5bd0..08134f4 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -228,7 +228,6 @@
/* USB EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 107a0f8..75d2065 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -63,6 +63,5 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 8cf9bac..0d61753 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -65,7 +65,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
/* GPU needs setup */
#define CONFIG_TEGRA_GPU
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index db1cc24..342ffbe 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -82,7 +82,6 @@
*/
#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
#define CONFIG_EHCI_IS_TDI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h
index 874fe34d..4c05576 100644
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -68,7 +68,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
/* GPU needs setup */
#define CONFIG_TEGRA_GPU
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 6083847..c2096fb 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -64,6 +64,5 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index a94748c..ccd7cd7 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -53,7 +53,7 @@
#define DEFAULT_FIT_TI_ARGS \
"boot_fit=0\0" \
- "fit_loadaddr=0x88000000\0" \
+ "fit_loadaddr=0x87000000\0" \
"fit_bootfile=fitImage\0" \
"update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile}\0" \
"loadfit=run args_mmc; bootm ${loadaddr}#${fdtfile};\0" \
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 3fadef7..26290ef 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -193,7 +193,6 @@
/* USB Configuration */
#define CONFIG_USB_XHCI_KEYSTONE
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_SS_BASE KS2_USB_SS_BASE
#define CONFIG_USB_HOST_XHCI_BASE KS2_USB_HOST_XHCI_BASE
#define CONFIG_DEV_USB_PHY_BASE KS2_DEV_USB_PHY_BASE
@@ -249,7 +248,11 @@
"addr_secdb_key=0xc000000\0" \
"name_kern=zImage\0" \
"addr_mon=0x87000000\0" \
+ "addr_non_sec_mon=0x0c087fc0\0" \
+ "addr_load_sec_bm=0x0c08c000\0" \
"run_mon=mon_install ${addr_mon}\0" \
+ "run_mon_hs=mon_install ${addr_non_sec_mon} " \
+ "${addr_load_sec_bm}\0" \
"run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0" \
"init_net=run args_all args_net\0" \
"init_nfs=setenv autoload no; dhcp; run args_all args_net\0" \
@@ -263,7 +266,13 @@
"get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0" \
"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
"get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0" \
- "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0" \
+ "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0" \
+ "get_fit_net=dhcp ${fit_loadaddr} ${tftp_root}" \
+ "/${fit_bootfile}\0" \
+ "get_fit_nfs=nfs ${fit_loadaddr} ${nfs_root}/boot/${fit_bootfile}\0"\
+ "get_fit_ubi=ubifsload ${fit_loadaddr} ${bootdir}/${fit_bootfile}\0"\
+ "get_fit_mmc=load mmc ${bootpart} ${fit_loadaddr} " \
+ "${bootdir}/${fit_bootfile}\0" \
"get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0" \
"get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
"burn_uboot_spi=sf probe; sf erase 0 0x80000; " \
@@ -279,6 +288,8 @@
"get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \
"get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \
"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
+ "get_fit_ramfs=dhcp ${fit_loadaddr} ${tftp_root}" \
+ "/${fit_bootfile}\0" \
"get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
"get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0" \
@@ -293,9 +304,21 @@
"1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
#ifndef CONFIG_BOOTCOMMAND
+#ifndef CONFIG_TI_SECURE_DEVICE
#define CONFIG_BOOTCOMMAND \
- "run init_${boot} get_mon_${boot} run_mon init_fw_rd_${boot} " \
- "get_fdt_${boot} get_kern_${boot} run_kern"
+ "run init_${boot}; " \
+ "run get_mon_${boot} run_mon; " \
+ "run get_kern_${boot}; " \
+ "run init_fw_rd_${boot}; " \
+ "run get_fdt_${boot}; " \
+ "run run_kern"
+#else
+#define CONFIG_BOOTCOMMAND \
+ "run run_mon_hs; " \
+ "run init_${boot}; " \
+ "run get_fit_${boot}; " \
+ "bootm ${fit_loadaddr}#${name_fdt}"
+#endif
#endif
#define CONFIG_BOOTARGS \
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index b8afa81..6f53139 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -77,17 +77,7 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
-#ifdef CONFIG_ARMV8_MULTIENTRY
-#define CPU_RELEASE_ADDR 0x80000000
-#define COUNTER_FREQUENCY 50000000
-#define CONFIG_GICV3
-#define GICD_BASE 0x5fe00000
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-#define GICR_BASE 0x5fe40000
-#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define GICR_BASE 0x5fe80000
-#endif
-#elif !defined(CONFIG_ARM64)
+#if !defined(CONFIG_ARM64)
/* Time clock 1MHz */
#define CONFIG_SYS_TIMER_RATE 1000000
#endif
@@ -111,9 +101,6 @@
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-/* USB */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
-
/* SD/MMC */
#define CONFIG_SUPPORT_EMMC_BOOT
@@ -134,7 +121,7 @@
#define CONFIG_CMDLINE_EDITING /* add command line history */
-#if defined(CONFIG_ARM64) && !defined(CONFIG_ARMV8_MULTIENTRY)
+#if defined(CONFIG_ARM64)
/* ARM Trusted Firmware */
#define BOOT_IMAGES \
"second_image=unph_bl.bin\0" \
@@ -262,9 +249,7 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */
-#if defined(CONFIG_ARM64)
-#define CONFIG_SPL_TEXT_BASE 0x30000000
-#elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
+#if defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
defined(CONFIG_ARCH_UNIPHIER_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
@@ -272,18 +257,9 @@
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-#define CONFIG_SPL_STACK (0x30014c00)
-#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define CONFIG_SPL_STACK (0x3001c000)
-#else
#define CONFIG_SPL_STACK (0x00100000)
-#endif
#define CONFIG_SPL_FRAMEWORK
-#ifdef CONFIG_ARM64
-#define CONFIG_SPL_BOARD_LOAD_IMAGE
-#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
@@ -292,16 +268,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
-#if defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define CONFIG_SPL_MAX_SIZE 0x14000
-#else
#define CONFIG_SPL_MAX_SIZE 0x10000
-#endif
-#if defined(CONFIG_ARCH_UNIPHIER_LD11)
-#define CONFIG_SPL_BSS_START_ADDR 0x30012000
-#elif defined(CONFIG_ARCH_UNIPHIER_LD20)
-#define CONFIG_SPL_BSS_START_ADDR 0x30016000
-#endif
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#define CONFIG_SPL_PAD_TO 0x20000
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index dc35b28..adff1b6 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -63,12 +63,6 @@
#endif
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#endif
-
/* USB device */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 1be6974..aa1e505 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -128,7 +128,6 @@
* USB configuration
*/
#define CONFIG_USB_EHCI_PCI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_USB_HOST_ETHER
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index c30e37c..7c5ec19 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -90,8 +90,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x8000000
#if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-
#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_USB_CABLE_CHECK
diff --git a/include/dfu.h b/include/dfu.h
index f39d3f1..7e322d9 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -110,7 +110,7 @@
struct sf_internal_data sf;
} data;
- long (*get_medium_size)(struct dfu_entity *dfu);
+ int (*get_medium_size)(struct dfu_entity *dfu, u64 *size);
int (*read_medium)(struct dfu_entity *dfu,
u64 offset, void *buf, long *len);
@@ -132,7 +132,7 @@
u8 *i_buf;
u8 *i_buf_start;
u8 *i_buf_end;
- long r_left;
+ u64 r_left;
long b_left;
u32 bad_skip; /* for nand use */
diff --git a/include/dm/of_access.h b/include/dm/of_access.h
index c5ea391..c49d287 100644
--- a/include/dm/of_access.h
+++ b/include/dm/of_access.h
@@ -353,6 +353,24 @@
int index, struct of_phandle_args *out_args);
/**
+ * of_count_phandle_with_args() - Count the number of phandle in a list
+ *
+ * @np: pointer to a device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @return number of phandle found, -ENOENT if
+ * @list_name does not exist, -EINVAL if a phandle was not found,
+ * @cells_name could not be found, the arguments were truncated or there
+ * were too many arguments.
+ *
+ * Returns number of phandle found on success, on error returns appropriate
+ * errno value.
+ *
+ */
+int of_count_phandle_with_args(const struct device_node *np,
+ const char *list_name, const char *cells_name);
+
+/**
* of_alias_scan() - Scan all properties of the 'aliases' node
*
* The function scans all the properties of the 'aliases' node and populates
diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h
index 15ad519..210ddb2 100644
--- a/include/dm/ofnode.h
+++ b/include/dm/ofnode.h
@@ -15,6 +15,8 @@
/* Enable checks to protect against invalid calls */
#undef OF_CHECKS
+struct resource;
+
/**
* ofnode - reference to a device tree node
*
@@ -433,6 +435,23 @@
struct ofnode_phandle_args *out_args);
/**
+ * ofnode_count_phandle_with_args() - Count number of phandle in a list
+ *
+ * This function is useful to count phandles into a list.
+ * Returns number of phandle on success, on error returns appropriate
+ * errno value.
+ *
+ * @node: device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @return number of phandle on success, -ENOENT if @list_name does not
+ * exist, -EINVAL if a phandle was not found, @cells_name could not
+ * be found.
+ */
+int ofnode_count_phandle_with_args(ofnode node, const char *list_name,
+ const char *cells_name);
+
+/**
* ofnode_path() - find a node by full path
*
* @path: Full path to node, e.g. "/bus/spi@1"
@@ -605,4 +624,6 @@
*/
bool ofnode_pre_reloc(ofnode node);
+int ofnode_read_resource(ofnode node, uint index, struct resource *res);
+
#endif
diff --git a/include/dm/platform_data/serial_stm32x7.h b/include/dm/platform_data/serial_stm32x7.h
deleted file mode 100644
index 328a8a3..0000000
--- a/include/dm/platform_data/serial_stm32x7.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * (C) Copyright 2016
- * Vikas Manocha, <vikas.manocha@st.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __SERIAL_STM32x7_H
-#define __SERIAL_STM32x7_H
-
-/* Information about a serial port */
-struct stm32x7_serial_platdata {
- struct stm32_usart *base; /* address of registers in physical memory */
- unsigned int clock;
-};
-
-#endif /* __SERIAL_STM32x7_H */
diff --git a/include/dm/read.h b/include/dm/read.h
index b86a2f5..c3a4a56 100644
--- a/include/dm/read.h
+++ b/include/dm/read.h
@@ -44,16 +44,6 @@
return ofnode_valid(dev_ofnode(dev));
}
-/**
- * dev_read_resource() - obtain an indexed resource from a device.
- *
- * @dev: devuce to examine
- * @index index of the resource to retrieve (0 = first)
- * @res returns the resource
- * @return 0 if ok, negative on error
- */
-int dev_read_resource(struct udevice *dev, uint index, struct resource *res);
-
#ifndef CONFIG_DM_DEV_READ_INLINE
/**
* dev_read_u32_default() - read a 32-bit integer from a device's DT property
@@ -209,6 +199,24 @@
struct ofnode_phandle_args *out_args);
/**
+ * dev_count_phandle_with_args() - Return phandle number in a list
+ *
+ * This function is usefull to get phandle number contained in a property list.
+ * For example, this allows to allocate the right amount of memory to keep
+ * clock's reference contained into the "clocks" property.
+ *
+ *
+ * @dev: device whose node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @Returns number of phandle found on success, on error returns appropriate
+ * errno value.
+ */
+
+int dev_count_phandle_with_args(struct udevice *dev, const char *list_name,
+ const char *cells_name);
+
+/**
* dev_read_addr_cells() - Get the number of address cells for a device's node
*
* This walks back up the tree to find the closest #address-cells property
@@ -266,7 +274,7 @@
* @lenp: place to put length on success
* @return pointer to property, or NULL if not found
*/
-const u32 *dev_read_prop(struct udevice *dev, const char *propname, int *lenp);
+const void *dev_read_prop(struct udevice *dev, const char *propname, int *lenp);
/**
* dev_read_alias_seq() - Get the alias sequence number of a node
@@ -348,6 +356,16 @@
*/
int dev_read_enabled(struct udevice *dev);
+/**
+ * dev_read_resource() - obtain an indexed resource from a device.
+ *
+ * @dev: devuce to examine
+ * @index index of the resource to retrieve (0 = first)
+ * @res returns the resource
+ * @return 0 if ok, negative on error
+ */
+int dev_read_resource(struct udevice *dev, uint index, struct resource *res);
+
#else /* CONFIG_DM_DEV_READ_INLINE is enabled */
static inline int dev_read_u32_default(struct udevice *dev,
@@ -416,6 +434,13 @@
out_args);
}
+static inline int dev_count_phandle_with_args(struct udevice *dev,
+ const char *list_name, const char *cells_name)
+{
+ return ofnode_count_phandle_with_args(dev_ofnode(dev), list_name,
+ cells_name);
+}
+
static inline int dev_read_addr_cells(struct udevice *dev)
{
/* NOTE: this call should walk up the parent stack */
@@ -443,8 +468,8 @@
return fdt_get_phandle(gd->fdt_blob, dev_of_offset(dev));
}
-static inline const u32 *dev_read_prop(struct udevice *dev,
- const char *propname, int *lenp)
+static inline const void *dev_read_prop(struct udevice *dev,
+ const char *propname, int *lenp)
{
return ofnode_get_property(dev_ofnode(dev), propname, lenp);
}
@@ -482,6 +507,12 @@
return fdtdec_get_is_enabled(gd->fdt_blob, dev_of_offset(dev));
}
+static inline int dev_read_resource(struct udevice *dev, uint index,
+ struct resource *res)
+{
+ return ofnode_read_resource(dev_ofnode(dev), index, res);
+}
+
#endif /* CONFIG_DM_DEV_READ_INLINE */
/**
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index 692846c..e3e9f79 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -5,30 +5,50 @@
#ifndef __GXBB_CLKC_H
#define __GXBB_CLKC_H
-#define CLKID_CPUCLK 1
#define CLKID_HDMI_PLL 2
#define CLKID_FCLK_DIV2 4
#define CLKID_FCLK_DIV3 5
#define CLKID_FCLK_DIV4 6
+#define CLKID_GP0_PLL 9
#define CLKID_CLK81 12
#define CLKID_MPLL2 15
-#define CLKID_SPI 34
+#define CLKID_SPICC 21
#define CLKID_I2C 22
#define CLKID_SAR_ADC 23
+#define CLKID_RNG0 25
+#define CLKID_UART0 26
+#define CLKID_SPI 34
#define CLKID_ETH 36
+#define CLKID_AIU_GLUE 38
+#define CLKID_IEC958 39
+#define CLKID_I2S_OUT 40
+#define CLKID_MIXER_IFACE 44
+#define CLKID_AIU 47
+#define CLKID_UART1 48
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
+#define CLKID_UART2 68
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
+#define CLKID_AOCLK_GATE 80
+#define CLKID_IEC958_GATE 81
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
#define CLKID_SAR_ADC_CLK 97
#define CLKID_SAR_ADC_SEL 98
+#define CLKID_MALI_0_SEL 100
+#define CLKID_MALI_0 102
+#define CLKID_MALI_1_SEL 103
+#define CLKID_MALI_1 105
+#define CLKID_MALI 106
+#define CLKID_CTS_AMCLK 107
+#define CLKID_CTS_MCLK_I958 110
+#define CLKID_CTS_I958 113
#endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/clock/stm32fx-clock.h b/include/dt-bindings/clock/stm32fx-clock.h
new file mode 100644
index 0000000..49bb3c2
--- /dev/null
+++ b/include/dt-bindings/clock/stm32fx-clock.h
@@ -0,0 +1,59 @@
+/*
+ * stm32fx-clock.h
+ *
+ * Copyright (C) 2016 STMicroelectronics
+ * Author: Gabriel Fernandez for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+/*
+ * List of clocks wich are not derived from system clock (SYSCLOCK)
+ *
+ * The index of these clocks is the secondary index of DT bindings
+ * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ *
+ * e.g:
+ <assigned-clocks = <&rcc 1 CLK_LSE>;
+*/
+
+#ifndef _DT_BINDINGS_CLK_STMFX_H
+#define _DT_BINDINGS_CLK_STMFX_H
+
+#define SYSTICK 0
+#define FCLK 1
+#define CLK_LSI 2
+#define CLK_LSE 3
+#define CLK_HSE_RTC 4
+#define CLK_RTC 5
+#define PLL_VCO_I2S 6
+#define PLL_VCO_SAI 7
+#define CLK_LCD 8
+#define CLK_I2S 9
+#define CLK_SAI1 10
+#define CLK_SAI2 11
+#define CLK_I2SQ_PDIV 12
+#define CLK_SAIQ_PDIV 13
+
+#define END_PRIMARY_CLK 14
+
+#define CLK_HSI 14
+#define CLK_SYSCLK 15
+#define CLK_HDMI_CEC 16
+#define CLK_SPDIF 17
+#define CLK_USART1 18
+#define CLK_USART2 19
+#define CLK_USART3 20
+#define CLK_UART4 21
+#define CLK_UART5 22
+#define CLK_USART6 23
+#define CLK_UART7 24
+#define CLK_UART8 25
+#define CLK_I2C1 26
+#define CLK_I2C2 27
+#define CLK_I2C3 28
+#define CLK_I2C4 29
+#define CLK_LPTIMER 30
+
+#define END_PRIMARY_CLK_F7 31
+
+#endif
diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h
new file mode 100644
index 0000000..e36cc69
--- /dev/null
+++ b/include/dt-bindings/mfd/stm32f7-rcc.h
@@ -0,0 +1,112 @@
+/*
+ * This header provides constants for the STM32F7 RCC IP
+ */
+
+#ifndef _DT_BINDINGS_MFD_STM32F7_RCC_H
+#define _DT_BINDINGS_MFD_STM32F7_RCC_H
+
+/* AHB1 */
+#define STM32F7_RCC_AHB1_GPIOA 0
+#define STM32F7_RCC_AHB1_GPIOB 1
+#define STM32F7_RCC_AHB1_GPIOC 2
+#define STM32F7_RCC_AHB1_GPIOD 3
+#define STM32F7_RCC_AHB1_GPIOE 4
+#define STM32F7_RCC_AHB1_GPIOF 5
+#define STM32F7_RCC_AHB1_GPIOG 6
+#define STM32F7_RCC_AHB1_GPIOH 7
+#define STM32F7_RCC_AHB1_GPIOI 8
+#define STM32F7_RCC_AHB1_GPIOJ 9
+#define STM32F7_RCC_AHB1_GPIOK 10
+#define STM32F7_RCC_AHB1_CRC 12
+#define STM32F7_RCC_AHB1_BKPSRAM 18
+#define STM32F7_RCC_AHB1_DTCMRAM 20
+#define STM32F7_RCC_AHB1_DMA1 21
+#define STM32F7_RCC_AHB1_DMA2 22
+#define STM32F7_RCC_AHB1_DMA2D 23
+#define STM32F7_RCC_AHB1_ETHMAC 25
+#define STM32F7_RCC_AHB1_ETHMACTX 26
+#define STM32F7_RCC_AHB1_ETHMACRX 27
+#define STM32FF_RCC_AHB1_ETHMACPTP 28
+#define STM32F7_RCC_AHB1_OTGHS 29
+#define STM32F7_RCC_AHB1_OTGHSULPI 30
+
+#define STM32F7_AHB1_RESET(bit) (STM32F7_RCC_AHB1_##bit + (0x10 * 8))
+#define STM32F7_AHB1_CLOCK(bit) (STM32F7_RCC_AHB1_##bit)
+
+
+/* AHB2 */
+#define STM32F7_RCC_AHB2_DCMI 0
+#define STM32F7_RCC_AHB2_CRYP 4
+#define STM32F7_RCC_AHB2_HASH 5
+#define STM32F7_RCC_AHB2_RNG 6
+#define STM32F7_RCC_AHB2_OTGFS 7
+
+#define STM32F7_AHB2_RESET(bit) (STM32F7_RCC_AHB2_##bit + (0x14 * 8))
+#define STM32F7_AHB2_CLOCK(bit) (STM32F7_RCC_AHB2_##bit + 0x20)
+
+/* AHB3 */
+#define STM32F7_RCC_AHB3_FMC 0
+#define STM32F7_RCC_AHB3_QSPI 1
+
+#define STM32F7_AHB3_RESET(bit) (STM32F7_RCC_AHB3_##bit + (0x18 * 8))
+#define STM32F7_AHB3_CLOCK(bit) (STM32F7_RCC_AHB3_##bit + 0x40)
+
+/* APB1 */
+#define STM32F7_RCC_APB1_TIM2 0
+#define STM32F7_RCC_APB1_TIM3 1
+#define STM32F7_RCC_APB1_TIM4 2
+#define STM32F7_RCC_APB1_TIM5 3
+#define STM32F7_RCC_APB1_TIM6 4
+#define STM32F7_RCC_APB1_TIM7 5
+#define STM32F7_RCC_APB1_TIM12 6
+#define STM32F7_RCC_APB1_TIM13 7
+#define STM32F7_RCC_APB1_TIM14 8
+#define STM32F7_RCC_APB1_LPTIM1 9
+#define STM32F7_RCC_APB1_WWDG 11
+#define STM32F7_RCC_APB1_SPI2 14
+#define STM32F7_RCC_APB1_SPI3 15
+#define STM32F7_RCC_APB1_SPDIFRX 16
+#define STM32F7_RCC_APB1_UART2 17
+#define STM32F7_RCC_APB1_UART3 18
+#define STM32F7_RCC_APB1_UART4 19
+#define STM32F7_RCC_APB1_UART5 20
+#define STM32F7_RCC_APB1_I2C1 21
+#define STM32F7_RCC_APB1_I2C2 22
+#define STM32F7_RCC_APB1_I2C3 23
+#define STM32F7_RCC_APB1_I2C4 24
+#define STM32F7_RCC_APB1_CAN1 25
+#define STM32F7_RCC_APB1_CAN2 26
+#define STM32F7_RCC_APB1_CEC 27
+#define STM32F7_RCC_APB1_PWR 28
+#define STM32F7_RCC_APB1_DAC 29
+#define STM32F7_RCC_APB1_UART7 30
+#define STM32F7_RCC_APB1_UART8 31
+
+#define STM32F7_APB1_RESET(bit) (STM32F7_RCC_APB1_##bit + (0x20 * 8))
+#define STM32F7_APB1_CLOCK(bit) (STM32F7_RCC_APB1_##bit + 0x80)
+
+/* APB2 */
+#define STM32F7_RCC_APB2_TIM1 0
+#define STM32F7_RCC_APB2_TIM8 1
+#define STM32F7_RCC_APB2_USART1 4
+#define STM32F7_RCC_APB2_USART6 5
+#define STM32F7_RCC_APB2_ADC1 8
+#define STM32F7_RCC_APB2_ADC2 9
+#define STM32F7_RCC_APB2_ADC3 10
+#define STM32F7_RCC_APB2_SDMMC1 11
+#define STM32F7_RCC_APB2_SPI1 12
+#define STM32F7_RCC_APB2_SPI4 13
+#define STM32F7_RCC_APB2_SYSCFG 14
+#define STM32F7_RCC_APB2_TIM9 16
+#define STM32F7_RCC_APB2_TIM10 17
+#define STM32F7_RCC_APB2_TIM11 18
+#define STM32F7_RCC_APB2_SPI5 20
+#define STM32F7_RCC_APB2_SPI6 21
+#define STM32F7_RCC_APB2_SAI1 22
+#define STM32F7_RCC_APB2_SAI2 23
+#define STM32F7_RCC_APB2_LTDC 26
+
+#define STM32F7_APB2_RESET(bit) (STM32F7_RCC_APB2_##bit + (0x24 * 8))
+#define STM32F7_APB2_CLOCK(bit) (STM32F7_RCC_APB2_##bit + 0xA0)
+
+#endif /* _DT_BINDINGS_MFD_STM32F7_RCC_H */
diff --git a/include/dt-structs.h b/include/dt-structs.h
index e13afa6..0732c44 100644
--- a/include/dt-structs.h
+++ b/include/dt-structs.h
@@ -4,8 +4,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __DT_STTUCTS
-#define __DT_STTUCTS
+#ifndef __DT_STRUCTS
+#define __DT_STRUCTS
/* These structures may only be used in SPL */
#if CONFIG_IS_ENABLED(OF_PLATDATA)
diff --git a/include/fdtdec.h b/include/fdtdec.h
index eda2ffa..4a0947c 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -119,12 +119,6 @@
COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */
COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */
COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
- COMPAT_NVIDIA_TEGRA124_PMC, /* Tegra 124 power mgmt controller */
- COMPAT_NVIDIA_TEGRA186_SDMMC, /* Tegra186 SDMMC controller */
- COMPAT_NVIDIA_TEGRA210_SDMMC, /* Tegra210 SDMMC controller */
- COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */
- COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */
- COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */
COMPAT_NVIDIA_TEGRA124_XUSB_PADCTL,
/* Tegra124 XUSB pad controller */
COMPAT_NVIDIA_TEGRA210_XUSB_PADCTL,
diff --git a/include/generic-phy.h b/include/generic-phy.h
index 762704c..eac5adc 100644
--- a/include/generic-phy.h
+++ b/include/generic-phy.h
@@ -122,6 +122,7 @@
int (*power_off)(struct phy *phy);
};
+#ifdef CONFIG_PHY
/**
* generic_phy_init() - initialize the PHY port
@@ -220,4 +221,56 @@
int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
struct phy *phy);
+#else /* CONFIG_PHY */
+
+static inline int generic_phy_init(struct phy *phy)
+{
+ return 0;
+}
+
+static inline int generic_phy_exit(struct phy *phy)
+{
+ return 0;
+}
+
+static inline int generic_phy_reset(struct phy *phy)
+{
+ return 0;
+}
+
+static inline int generic_phy_power_on(struct phy *phy)
+{
+ return 0;
+}
+
+static inline int generic_phy_power_off(struct phy *phy)
+{
+ return 0;
+}
+
+static inline int generic_phy_get_by_index(struct udevice *user, int index,
+ struct phy *phy)
+{
+ return 0;
+}
+
+static inline int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
+ struct phy *phy)
+{
+ return 0;
+}
+
+#endif /* CONFIG_PHY */
+
+/**
+ * generic_phy_valid() - check if PHY port is valid
+ *
+ * @phy: the PHY port to check
+ * @return TRUE if valid, or FALSE
+ */
+static inline bool generic_phy_valid(struct phy *phy)
+{
+ return phy->dev != NULL;
+}
+
#endif /*__GENERIC_PHY_H */
diff --git a/include/os.h b/include/os.h
index 049b248..2bf4bdb 100644
--- a/include/os.h
+++ b/include/os.h
@@ -241,26 +241,6 @@
int os_get_filesize(const char *fname, loff_t *size);
/**
- * Write a character to the controlling OS terminal
- *
- * This bypasses the U-Boot console support and writes directly to the OS
- * stdout file descriptor.
- *
- * @param ch Character to write
- */
-void os_putc(int ch);
-
-/**
- * Write a string to the controlling OS terminal
- *
- * This bypasses the U-Boot console support and writes directly to the OS
- * stdout file descriptor.
- *
- * @param str String to write (note that \n is not appended)
- */
-void os_puts(const char *str);
-
-/**
* Write the sandbox RAM buffer to a existing file
*
* @param fname Filename to write memory to (simple binary format)
diff --git a/include/power/as3722.h b/include/power/as3722.h
index 0f22482..cb4b188 100644
--- a/include/power/as3722.h
+++ b/include/power/as3722.h
@@ -7,24 +7,23 @@
#ifndef __POWER_AS3722_H__
#define __POWER_AS3722_H__
-#include <asm/types.h>
-
#define AS3722_GPIO_OUTPUT_VDDH (1 << 0)
#define AS3722_GPIO_INVERT (1 << 1)
-struct udevice;
+#define AS3722_DEVICE_ID 0x0c
+#define AS3722_SD_VOLTAGE(n) (0x00 + (n))
+#define AS3722_LDO_VOLTAGE(n) (0x10 + (n))
+#define AS3722_SD_CONTROL 0x4d
+#define AS3722_LDO_CONTROL 0x4e
+#define AS3722_ASIC_ID1 0x90
+#define AS3722_ASIC_ID2 0x91
-int as3722_init(struct udevice **devp);
-int as3722_sd_enable(struct udevice *pmic, unsigned int sd);
-int as3722_sd_set_voltage(struct udevice *pmic, unsigned int sd, u8 value);
-int as3722_ldo_enable(struct udevice *pmic, unsigned int ldo);
-int as3722_ldo_set_voltage(struct udevice *pmic, unsigned int ldo, u8 value);
-int as3722_gpio_configure(struct udevice *pmic, unsigned int gpio,
- unsigned long flags);
-int as3722_gpio_direction_output(struct udevice *pmic, unsigned int gpio,
- unsigned int level);
-int as3722_read(struct udevice *pmic, u8 reg, u8 *value);
-int as3722_write(struct udevice *pmic, u8 reg, u8 value);
-int as3722_get(struct udevice **devp);
+#define AS3722_GPIO_CONTROL(n) (0x08 + (n))
+#define AS3722_GPIO_SIGNAL_OUT 0x20
+#define AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH (1 << 0)
+#define AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL (7 << 0)
+#define AS3722_GPIO_CONTROL_INVERT (1 << 7)
+
+int as3722_sd_set_voltage(struct udevice *dev, unsigned int sd, u8 value);
#endif /* __POWER_AS3722_H__ */
diff --git a/include/reset.h b/include/reset.h
index f45fcf8..7185ade 100644
--- a/include/reset.h
+++ b/include/reset.h
@@ -100,6 +100,15 @@
struct reset_ctl *reset_ctl);
/**
+ * reset_request - Request a reset signal.
+ *
+ * @reset_ctl: A reset control struct.
+ *
+ * @return 0 if OK, or a negative error code.
+ */
+int reset_request(struct reset_ctl *reset_ctl);
+
+/**
* reset_free - Free a previously requested reset signal.
*
* @reset_ctl: A reset control struct that was previously successfully
@@ -135,6 +144,18 @@
*/
int reset_deassert(struct reset_ctl *reset_ctl);
+/**
+ * reset_release_all - Assert/Free an array of previously requested resets.
+ *
+ * For each reset contained in the reset array, this function will check if
+ * reset has been previously requested and then will assert and free it.
+ *
+ * @reset_ctl: A reset struct array that was previously successfully
+ * requested by reset_get_by_*().
+ * @count Number of reset contained in the array
+ * @return 0 if OK, or a negative error code.
+ */
+int reset_release_all(struct reset_ctl *reset_ctl, int count);
#else
static inline int reset_get_by_index(struct udevice *dev, int index,
struct reset_ctl *reset_ctl)
@@ -162,6 +183,12 @@
{
return 0;
}
+
+static inline int reset_release_all(struct reset_ctl *reset_ctl, int count)
+{
+ return 0;
+}
+
#endif
#endif
diff --git a/include/usb.h b/include/usb.h
index 62f051f..fad0401 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -537,6 +537,21 @@
unsigned short wHubChange;
} __attribute__ ((packed));
+/*
+ * Hub Device descriptor
+ * USB Hub class device protocols
+ */
+#define USB_HUB_PR_FS 0 /* Full speed hub */
+#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
+#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
+#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
+#define USB_HUB_PR_SS 3 /* Super speed hub */
+
+/* Transaction Translator Think Times, in bits */
+#define HUB_TTTT_8_BITS 0x00
+#define HUB_TTTT_16_BITS 0x20
+#define HUB_TTTT_24_BITS 0x40
+#define HUB_TTTT_32_BITS 0x60
/* Hub descriptor */
struct usb_hub_descriptor {
@@ -546,10 +561,20 @@
unsigned short wHubCharacteristics;
unsigned char bPwrOn2PwrGood;
unsigned char bHubContrCurrent;
- unsigned char DeviceRemovable[(USB_MAXCHILDREN+1+7)/8];
- unsigned char PortPowerCtrlMask[(USB_MAXCHILDREN+1+7)/8];
- /* DeviceRemovable and PortPwrCtrlMask want to be variable-length
- bitmaps that hold max 255 entries. (bit0 is ignored) */
+ /* 2.0 and 3.0 hubs differ here */
+ union {
+ struct {
+ /* add 1 bit for hub status change; round to bytes */
+ __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+ __u8 PortPowerCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+ } __attribute__ ((packed)) hs;
+
+ struct {
+ __u8 bHubHdrDecLat;
+ __le16 wHubDelay;
+ __le16 DeviceRemovable;
+ } __attribute__ ((packed)) ss;
+ } u;
} __attribute__ ((packed));
@@ -560,6 +585,8 @@
ulong connect_timeout; /* Device connection timeout in ms */
ulong query_delay; /* Device query delay in ms */
int overcurrent_count[USB_MAXCHILDREN]; /* Over-current counter */
+ int hub_depth; /* USB 3.0 hub depth */
+ struct usb_tt tt; /* Transaction Translator */
};
#ifdef CONFIG_DM_USB
@@ -731,6 +758,14 @@
* reset_root_port() - Reset usb root port
*/
int (*reset_root_port)(struct udevice *bus, struct usb_device *udev);
+
+ /**
+ * update_hub_device() - Update HCD's internal representation of hub
+ *
+ * After a hub descriptor is fetched, notify HCD so that its internal
+ * representation of this hub can be updated (xHCI)
+ */
+ int (*update_hub_device)(struct udevice *bus, struct usb_device *udev);
};
#define usb_get_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
@@ -766,6 +801,14 @@
struct usb_device *parent);
/**
+ * usb_hub_is_root_hub() - Test whether a hub device is root hub or not
+ *
+ * @hub: USB hub device to test
+ * @return: true if the hub device is root hub, false otherwise.
+ */
+bool usb_hub_is_root_hub(struct udevice *hub);
+
+/**
* usb_hub_scan() - Scan a hub and find its devices
*
* @hub: Hub device to scan
@@ -861,24 +904,6 @@
int usb_hub_probe(struct usb_device *dev, int ifnum);
void usb_hub_reset(void);
-/**
- * legacy_hub_port_reset() - reset a port given its usb_device pointer
- *
- * Reset a hub port and see if a device is present on that port, providing
- * sufficient time for it to show itself. The port status is returned.
- *
- * With driver model this moves to hub_port_reset() and is passed a struct
- * udevice.
- *
- * @dev: USB device to reset
- * @port: Port number to reset (note ports are numbered from 0 here)
- * @portstat: Returns port status
- */
-int legacy_hub_port_reset(struct usb_device *dev, int port,
- unsigned short *portstat);
-
-int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat);
-
/*
* usb_find_usb2_hub_address_port() - Get hub address and port for TT setting
*
@@ -914,6 +939,17 @@
int usb_alloc_device(struct usb_device *dev);
/**
+ * update_hub_device() - Update HCD's internal representation of hub
+ *
+ * After a hub descriptor is fetched, notify HCD so that its internal
+ * representation of this hub can be updated.
+ *
+ * @dev: Hub device
+ * @return 0 if OK, -ve on error
+ */
+int usb_update_hub_device(struct usb_device *dev);
+
+/**
* usb_emul_setup_device() - Set up a new USB device emulation
*
* This is normally called when a new emulation device is bound. It tells
@@ -926,7 +962,7 @@
* @desc_list: List of points or USB descriptors, terminated by NULL.
* The first entry must be struct usb_device_descriptor,
* and others follow on after that.
- * @return 0 if OK, -ve on error
+ * @return 0 if OK, -ENOSYS if not implemented, other -ve on error
*/
int usb_emul_setup_device(struct udevice *dev, int maxpacketsize,
struct usb_string *strings, void **desc_list);
diff --git a/include/usb_defs.h b/include/usb_defs.h
index 8214ba9..b7f2ead 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -93,6 +93,7 @@
#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02)
#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
+#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a)
/* Descriptor sizes per descriptor type */
#define USB_DT_DEVICE_SIZE 18
@@ -261,12 +262,17 @@
/*
* Changes to wPortStatus bit field in USB 3.0
- * See USB 3.0 spec Table 10-11
+ * See USB 3.0 spec Table 10-10
*/
#define USB_SS_PORT_STAT_LINK_STATE 0x01e0
#define USB_SS_PORT_STAT_POWER 0x0200
#define USB_SS_PORT_STAT_SPEED 0x1c00
#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000
+/* Bits that are the same from USB 2.0 */
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
+ USB_PORT_STAT_ENABLE | \
+ USB_PORT_STAT_OVERCURRENT | \
+ USB_PORT_STAT_RESET)
/* wPortChange bits */
#define USB_PORT_STAT_C_CONNECTION 0x0001
@@ -287,6 +293,7 @@
#define HUB_CHAR_LPSM 0x0003
#define HUB_CHAR_COMPOUND 0x0004
#define HUB_CHAR_OCPM 0x0018
+#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
/*
* Hub Status & Hub Change bit masks
@@ -300,6 +307,20 @@
/* Mask for wIndex in get/set port feature */
#define USB_HUB_PORT_MASK 0xf
+/* Hub class request codes */
+#define USB_REQ_SET_HUB_DEPTH 0x0c
+
+/*
+ * As of USB 2.0, full/low speed devices are segregated into trees.
+ * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
+ * The other type grows from high speed hubs when they connect to
+ * full/low speed devices using "Transaction Translators" (TTs).
+ */
+struct usb_tt {
+ bool multi; /* true means one TT per port */
+ unsigned think_time; /* think time in ns */
+};
+
/*
* CBI style
*/
diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c
index 221ebbf..b04f7c6 100644
--- a/lib/asm-offsets.c
+++ b/lib/asm-offsets.c
@@ -28,7 +28,7 @@
DEFINE(GD_SIZE, sizeof(struct global_data));
DEFINE(GD_BD, offsetof(struct global_data, bd));
-#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
#endif
diff --git a/lib/efi/efi_app.c b/lib/efi/efi_app.c
index 452ab5d..f1afd9c 100644
--- a/lib/efi/efi_app.c
+++ b/lib/efi/efi_app.c
@@ -48,7 +48,7 @@
return ret;
memset(gd, '\0', sizeof(*gd));
- gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_SYS_MALLOC_F_LEN,
+ gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_VAL(SYS_MALLOC_F_LEN),
&ret);
if (!gd->malloc_base)
return ret;
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index fbb48bf..d2dbd0f 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -34,12 +34,6 @@
COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"),
COMPAT(NVIDIA_TEGRA20_EMC_TABLE, "nvidia,tegra20-emc-table"),
COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"),
- COMPAT(NVIDIA_TEGRA124_PMC, "nvidia,tegra124-pmc"),
- COMPAT(NVIDIA_TEGRA186_SDMMC, "nvidia,tegra186-sdhci"),
- COMPAT(NVIDIA_TEGRA210_SDMMC, "nvidia,tegra210-sdhci"),
- COMPAT(NVIDIA_TEGRA124_SDMMC, "nvidia,tegra124-sdhci"),
- COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"),
- COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"),
COMPAT(NVIDIA_TEGRA124_XUSB_PADCTL, "nvidia,tegra124-xusb-padctl"),
COMPAT(NVIDIA_TEGRA210_XUSB_PADCTL, "nvidia,tegra210-xusb-padctl"),
COMPAT(SMSC_LAN9215, "smsc,lan9215"),
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 93f0bf4..2d642de 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4868,7 +4868,6 @@
CONFIG_SYS_USBCTRL
CONFIG_SYS_USBD_BASE
CONFIG_SYS_USB_EHCI_CPU_INIT
-CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
CONFIG_SYS_USB_EHCI_REGS_BASE
CONFIG_SYS_USB_FAT_BOOT_PARTITION
CONFIG_SYS_USB_HOST
@@ -4877,7 +4876,6 @@
CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
CONFIG_SYS_USB_OHCI_REGS_BASE
CONFIG_SYS_USB_OHCI_SLOT_NAME
-CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS
CONFIG_SYS_USER_SWITCHES_BASE
CONFIG_SYS_USE_BOOT_NORFLASH
CONFIG_SYS_USE_DATAFLASH
@@ -5196,7 +5194,6 @@
CONFIG_USB_XHCI_FSL
CONFIG_USB_XHCI_KEYSTONE
CONFIG_USB_XHCI_OMAP
-CONFIG_USB_XHCI_PCI
CONFIG_USER_LOWLEVEL_INIT
CONFIG_USE_FDT
CONFIG_USE_INTERRUPT
diff --git a/tools/.gitignore b/tools/.gitignore
index 6ec71f5..ac0c979 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -11,6 +11,7 @@
/img2srec
/kwboot
/dumpimage
+/mips-relocs
/mkenvimage
/mkimage
/mkexynosspl
diff --git a/tools/Makefile b/tools/Makefile
index 62a7921..0743677 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -211,6 +211,8 @@
hostprogs-y += fdtgrep
fdtgrep-objs += $(LIBFDT_OBJS) fdtgrep.o
+hostprogs-$(CONFIG_MIPS) += mips-relocs
+
# We build some files with extra pedantic flags to try to minimize things
# that won't build on some weird host compiler -- though there are lots of
# exceptions for files that aren't complaint.
diff --git a/tools/mips-relocs.c b/tools/mips-relocs.c
new file mode 100644
index 0000000..8be69d3
--- /dev/null
+++ b/tools/mips-relocs.c
@@ -0,0 +1,432 @@
+/*
+ * MIPS Relocation Data Generator
+ *
+ * Copyright (c) 2017 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <assert.h>
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include <asm/relocs.h>
+
+#define hdr_field(pfx, idx, field) ({ \
+ uint64_t _val; \
+ unsigned int _size; \
+ \
+ if (is_64) { \
+ _val = pfx##hdr64[idx].field; \
+ _size = sizeof(pfx##hdr64[0].field); \
+ } else { \
+ _val = pfx##hdr32[idx].field; \
+ _size = sizeof(pfx##hdr32[0].field); \
+ } \
+ \
+ switch (_size) { \
+ case 1: \
+ break; \
+ case 2: \
+ _val = is_be ? be16toh(_val) : le16toh(_val); \
+ break; \
+ case 4: \
+ _val = is_be ? be32toh(_val) : le32toh(_val); \
+ break; \
+ case 8: \
+ _val = is_be ? be64toh(_val) : le64toh(_val); \
+ break; \
+ } \
+ \
+ _val; \
+})
+
+#define set_hdr_field(pfx, idx, field, val) ({ \
+ uint64_t _val; \
+ unsigned int _size; \
+ \
+ if (is_64) \
+ _size = sizeof(pfx##hdr64[0].field); \
+ else \
+ _size = sizeof(pfx##hdr32[0].field); \
+ \
+ switch (_size) { \
+ case 1: \
+ _val = val; \
+ break; \
+ case 2: \
+ _val = is_be ? htobe16(val) : htole16(val); \
+ break; \
+ case 4: \
+ _val = is_be ? htobe32(val) : htole32(val); \
+ break; \
+ case 8: \
+ _val = is_be ? htobe64(val) : htole64(val); \
+ break; \
+ default: \
+ /* We should never reach here */ \
+ _val = 0; \
+ assert(0); \
+ break; \
+ } \
+ \
+ if (is_64) \
+ pfx##hdr64[idx].field = _val; \
+ else \
+ pfx##hdr32[idx].field = _val; \
+})
+
+#define ehdr_field(field) \
+ hdr_field(e, 0, field)
+#define phdr_field(idx, field) \
+ hdr_field(p, idx, field)
+#define shdr_field(idx, field) \
+ hdr_field(s, idx, field)
+
+#define set_phdr_field(idx, field, val) \
+ set_hdr_field(p, idx, field, val)
+#define set_shdr_field(idx, field, val) \
+ set_hdr_field(s, idx, field, val)
+
+#define shstr(idx) (&shstrtab[idx])
+
+bool is_64, is_be;
+uint64_t text_base;
+
+struct mips_reloc {
+ uint8_t type;
+ uint64_t offset;
+} *relocs;
+size_t relocs_sz, relocs_idx;
+
+static int add_reloc(unsigned int type, uint64_t off)
+{
+ struct mips_reloc *new;
+ size_t new_sz;
+
+ switch (type) {
+ case R_MIPS_NONE:
+ case R_MIPS_LO16:
+ case R_MIPS_PC16:
+ case R_MIPS_HIGHER:
+ case R_MIPS_HIGHEST:
+ case R_MIPS_PC21_S2:
+ case R_MIPS_PC26_S2:
+ /* Skip these relocs */
+ return 0;
+
+ default:
+ break;
+ }
+
+ if (relocs_idx == relocs_sz) {
+ new_sz = relocs_sz ? relocs_sz * 2 : 128;
+ new = realloc(relocs, new_sz * sizeof(*relocs));
+ if (!new) {
+ fprintf(stderr, "Out of memory\n");
+ return -ENOMEM;
+ }
+
+ relocs = new;
+ relocs_sz = new_sz;
+ }
+
+ relocs[relocs_idx++] = (struct mips_reloc){
+ .type = type,
+ .offset = off,
+ };
+
+ return 0;
+}
+
+static int parse_mips32_rel(const void *_rel)
+{
+ const Elf32_Rel *rel = _rel;
+ uint32_t off, type;
+
+ off = is_be ? be32toh(rel->r_offset) : le32toh(rel->r_offset);
+ off -= text_base;
+
+ type = is_be ? be32toh(rel->r_info) : le32toh(rel->r_info);
+ type = ELF32_R_TYPE(type);
+
+ return add_reloc(type, off);
+}
+
+static int parse_mips64_rela(const void *_rel)
+{
+ const Elf64_Rela *rel = _rel;
+ uint64_t off, type;
+
+ off = is_be ? be64toh(rel->r_offset) : le64toh(rel->r_offset);
+ off -= text_base;
+
+ type = rel->r_info >> (64 - 8);
+
+ return add_reloc(type, off);
+}
+
+static void output_uint(uint8_t **buf, uint64_t val)
+{
+ uint64_t tmp;
+
+ do {
+ tmp = val & 0x7f;
+ val >>= 7;
+ tmp |= !!val << 7;
+ *(*buf)++ = tmp;
+ } while (val);
+}
+
+static int compare_relocs(const void *a, const void *b)
+{
+ const struct mips_reloc *ra = a, *rb = b;
+
+ return ra->offset - rb->offset;
+}
+
+int main(int argc, char *argv[])
+{
+ unsigned int i, j, i_rel_shdr, sh_type, sh_entsize, sh_entries;
+ size_t rel_size, rel_actual_size, load_sz;
+ const char *shstrtab, *sh_name, *rel_pfx;
+ int (*parse_fn)(const void *rel);
+ uint8_t *buf_start, *buf;
+ const Elf32_Ehdr *ehdr32;
+ const Elf64_Ehdr *ehdr64;
+ uintptr_t sh_offset;
+ Elf32_Phdr *phdr32;
+ Elf64_Phdr *phdr64;
+ Elf32_Shdr *shdr32;
+ Elf64_Shdr *shdr64;
+ struct stat st;
+ int err, fd;
+ void *elf;
+ bool skip;
+
+ fd = open(argv[1], O_RDWR);
+ if (fd == -1) {
+ fprintf(stderr, "Unable to open input file %s\n", argv[1]);
+ err = errno;
+ goto out_ret;
+ }
+
+ err = fstat(fd, &st);
+ if (err) {
+ fprintf(stderr, "Unable to fstat() input file\n");
+ goto out_close_fd;
+ }
+
+ elf = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+ if (elf == MAP_FAILED) {
+ fprintf(stderr, "Unable to mmap() input file\n");
+ err = errno;
+ goto out_close_fd;
+ }
+
+ ehdr32 = elf;
+ ehdr64 = elf;
+
+ if (memcmp(&ehdr32->e_ident[EI_MAG0], ELFMAG, SELFMAG)) {
+ fprintf(stderr, "Input file is not an ELF\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ if (ehdr32->e_ident[EI_VERSION] != EV_CURRENT) {
+ fprintf(stderr, "Unrecognised ELF version\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ switch (ehdr32->e_ident[EI_CLASS]) {
+ case ELFCLASS32:
+ is_64 = false;
+ break;
+ case ELFCLASS64:
+ is_64 = true;
+ break;
+ default:
+ fprintf(stderr, "Unrecognised ELF class\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ switch (ehdr32->e_ident[EI_DATA]) {
+ case ELFDATA2LSB:
+ is_be = false;
+ break;
+ case ELFDATA2MSB:
+ is_be = true;
+ break;
+ default:
+ fprintf(stderr, "Unrecognised ELF data encoding\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ if (ehdr_field(e_type) != ET_EXEC) {
+ fprintf(stderr, "Input ELF is not an executable\n");
+ printf("type 0x%lx\n", ehdr_field(e_type));
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ if (ehdr_field(e_machine) != EM_MIPS) {
+ fprintf(stderr, "Input ELF does not target MIPS\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ phdr32 = elf + ehdr_field(e_phoff);
+ phdr64 = elf + ehdr_field(e_phoff);
+ shdr32 = elf + ehdr_field(e_shoff);
+ shdr64 = elf + ehdr_field(e_shoff);
+ shstrtab = elf + shdr_field(ehdr_field(e_shstrndx), sh_offset);
+
+ i_rel_shdr = UINT_MAX;
+ for (i = 0; i < ehdr_field(e_shnum); i++) {
+ sh_name = shstr(shdr_field(i, sh_name));
+
+ if (!strcmp(sh_name, ".rel")) {
+ i_rel_shdr = i;
+ continue;
+ }
+
+ if (!strcmp(sh_name, ".text")) {
+ text_base = shdr_field(i, sh_addr);
+ continue;
+ }
+ }
+ if (i_rel_shdr == UINT_MAX) {
+ fprintf(stderr, "Unable to find .rel section\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+ if (!text_base) {
+ fprintf(stderr, "Unable to find .text base address\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ rel_pfx = is_64 ? ".rela." : ".rel.";
+
+ for (i = 0; i < ehdr_field(e_shnum); i++) {
+ sh_type = shdr_field(i, sh_type);
+ if ((sh_type != SHT_REL) && (sh_type != SHT_RELA))
+ continue;
+
+ sh_name = shstr(shdr_field(i, sh_name));
+ if (strncmp(sh_name, rel_pfx, strlen(rel_pfx))) {
+ if (strcmp(sh_name, ".rel") && strcmp(sh_name, ".rel.dyn"))
+ fprintf(stderr, "WARNING: Unexpected reloc section name '%s'\n", sh_name);
+ continue;
+ }
+
+ /*
+ * Skip reloc sections which either don't correspond to another
+ * section in the ELF, or whose corresponding section isn't
+ * loaded as part of the U-Boot binary (ie. doesn't have the
+ * alloc flags set).
+ */
+ skip = true;
+ for (j = 0; j < ehdr_field(e_shnum); j++) {
+ if (strcmp(&sh_name[strlen(rel_pfx) - 1], shstr(shdr_field(j, sh_name))))
+ continue;
+
+ skip = !(shdr_field(j, sh_flags) & SHF_ALLOC);
+ break;
+ }
+ if (skip)
+ continue;
+
+ sh_offset = shdr_field(i, sh_offset);
+ sh_entsize = shdr_field(i, sh_entsize);
+ sh_entries = shdr_field(i, sh_size) / sh_entsize;
+
+ if (sh_type == SHT_REL) {
+ if (is_64) {
+ fprintf(stderr, "REL-style reloc in MIPS64 ELF?\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ } else {
+ parse_fn = parse_mips32_rel;
+ }
+ } else {
+ if (is_64) {
+ parse_fn = parse_mips64_rela;
+ } else {
+ fprintf(stderr, "RELA-style reloc in MIPS32 ELF?\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+ }
+
+ for (j = 0; j < sh_entries; j++) {
+ err = parse_fn(elf + sh_offset + (j * sh_entsize));
+ if (err)
+ goto out_free_relocs;
+ }
+ }
+
+ /* Sort relocs in ascending order of offset */
+ qsort(relocs, relocs_idx, sizeof(*relocs), compare_relocs);
+
+ /* Make reloc offsets relative to their predecessor */
+ for (i = relocs_idx - 1; i > 0; i--)
+ relocs[i].offset -= relocs[i - 1].offset;
+
+ /* Write the relocations to the .rel section */
+ buf = buf_start = elf + shdr_field(i_rel_shdr, sh_offset);
+ for (i = 0; i < relocs_idx; i++) {
+ output_uint(&buf, relocs[i].type);
+ output_uint(&buf, relocs[i].offset >> 2);
+ }
+
+ /* Write a terminating R_MIPS_NONE (0) */
+ output_uint(&buf, R_MIPS_NONE);
+
+ /* Ensure the relocs didn't overflow the .rel section */
+ rel_size = shdr_field(i_rel_shdr, sh_size);
+ rel_actual_size = buf - buf_start;
+ if (rel_actual_size > rel_size) {
+ fprintf(stderr, "Relocs overflowed .rel section\n");
+ return -ENOMEM;
+ }
+
+ /* Update the .rel section's size */
+ set_shdr_field(i_rel_shdr, sh_size, rel_actual_size);
+
+ /* Shrink the PT_LOAD program header filesz (ie. shrink u-boot.bin) */
+ for (i = 0; i < ehdr_field(e_phnum); i++) {
+ if (phdr_field(i, p_type) != PT_LOAD)
+ continue;
+
+ load_sz = phdr_field(i, p_filesz);
+ load_sz -= rel_size - rel_actual_size;
+ set_phdr_field(i, p_filesz, load_sz);
+ break;
+ }
+
+ /* Make sure data is written back to the file */
+ err = msync(elf, st.st_size, MS_SYNC);
+ if (err) {
+ fprintf(stderr, "Failed to msync: %d\n", errno);
+ goto out_free_relocs;
+ }
+
+out_free_relocs:
+ free(relocs);
+ munmap(elf, st.st_size);
+out_close_fd:
+ close(fd);
+out_ret:
+ return err;
+}