Implemented writing, not working yet.
diff --git a/board/delta/nand.c b/board/delta/nand.c
index da6430d..ef78e30 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -46,6 +46,48 @@
return 0;
}
+/*
+ * Write buf to the DFC Controller Data Buffer
+ */
+static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ unsigned long bytes_multi = len & 0xfffffffc;
+ unsigned long rest = len & 0x3;
+ unsigned long *long_buf;
+ int i;
+
+ if(bytes_multi) {
+ for(i=0; i<bytes_multi; i+=4) {
+ long_buf = (unsigned long*) &buf[i];
+ NDDB = *long_buf;
+ }
+ }
+ if(rest) {
+ printf("delta_write_buf: ERROR, writing non 4-byte aligned data.\n");
+ }
+ return;
+}
+
+
+/*
+ * These functions are quite problematic for the DFC. Luckily they are
+ * not used in the current nand code, except for nand_command, which
+ * we've defined our own anyway. The problem is, that we always need
+ * to write 4 bytes to the DFC Data Buffer, but in these functions we
+ * don't know if to buffer the bytes/half words until we've gathered 4
+ * bytes or if to send them straight away.
+ *
+ * Solution: Don't use these with Mona's DFC and complain loudly.
+ */
+static void delta_write_word(struct mtd_info *mtd, u16 word)
+{
+ printf("delta_write_word: WARNING, this function does not work with the Monahans DFC!\n");
+}
+static void delta_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ printf("delta_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
+}
+
/* The original:
* static void delta_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
*
@@ -57,14 +99,14 @@
/* we have to be carefull not to overflow the buffer if len is
* not a multiple of 4 */
- unsigned long num_words = len & 0xfffffffc;
+ unsigned long bytes_multi = len & 0xfffffffc;
unsigned long rest = len & 0x3;
+ unsigned long *long_buf;
/* if there are any, first copy multiple of 4 bytes */
- if(num_words) {
- for(i=0; i<num_words; i+=4) {
- unsigned long *long_buf = &buf[i];
-/* ((unsigned long *) &buf[i]) = NDDB; */
+ if(bytes_multi) {
+ for(i=0; i<bytes_multi; i+=4) {
+ long_buf = (unsigned long*) &buf[i];
*long_buf = NDDB;
}
}
@@ -72,30 +114,22 @@
/* ...then the rest */
if(rest) {
unsigned long rest_data = NDDB;
- for(j=0;j<rest;j++)
+ for(j=0;j<rest; j++)
buf[i+j] = (u_char) ((rest_data>>j) & 0xff);
}
return;
}
-/* global var, too bad */
+static void delta_read_word(struct mtd_info *mtd, u_char byte)
+{
+ printf("delta_write_byte: UNIMPLEMENTED.\n");
+}
+
+/* global var, too bad: mk@tbd: move to ->priv pointer */
static unsigned long read_buf = 0;
static unsigned char bytes_read = 0;
-/* wait for read request */
-static void delta_wait_event(unsigned long event)
-{
- if(!event)
- return;
-
- while(1) {
- if(NDSR & event) {
- NDSR |= event;
- break;
- }
- }
-}
static u_char delta_read_byte(struct mtd_info *mtd)
{
/* struct nand_chip *this = mtd->priv; */
@@ -113,16 +147,50 @@
return byte;
}
+/* delay function */
+static void wait(unsigned long us)
+{
+#define OSCR_CLK_FREQ 3.250 /* kHz */
+
+ unsigned long start = OSCR;
+ unsigned long delta = 0, cur;
+ us *= OSCR_CLK_FREQ;
+
+ while (delta < us) {
+ cur = OSCR;
+ if(cur < start) /* OSCR overflowed */
+ delta = cur + (start^0xffffffff);
+ else
+ delta = cur - start;
+ }
+}
+
+/* poll the NAND Controller Status Register for event */
+static void delta_wait_event(unsigned long event)
+{
+ if(!event)
+ return;
+
+ while(1) {
+ if(NDSR & event) {
+ NDSR |= event;
+ break;
+ }
+ }
+}
+
/* this is really monahans, not board specific ... */
static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
/* register struct nand_chip *this = mtd->priv; */
unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0;
+ unsigned long what_the_hack;
/* clear the ugly byte read buffer */
bytes_read = 0;
read_buf = 0;
+
/* Clear NDSR */
NDSR = 0xFFF;
@@ -160,29 +228,76 @@
event = NDSR_RDDREQ;
break;
case NAND_CMD_PAGEPROG:
+ printk("delta_cmdfunc: NAND_CMD_PAGEPROG.\n");
+ ndcb0 = (NAND_CMD_PAGEPROG | (1 << 21));
break;
case NAND_CMD_ERASE1:
case NAND_CMD_ERASE2:
+ printf("delta_cmdfunc: NAND_CMD_ERASEx unimplemented.\n");
break;
case NAND_CMD_SEQIN:
- ndcb0 = (NAND_CMD_SEQIN<<8) | (1<<19) | (4<<16);
- if(column >= mtd->oobblock) {
- /* OOB area */
- column -= mtd->oobblock;
- ndcb0 |= NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- ndcb0 |= NAND_CMD_READ0;
- } else {
- /* Only for 8 bit devices - not delta!!! */
- column -= 256;
- ndcb0 |= NAND_CMD_READ1;
- }
+ /* send PAGE_PROG command(0x80) */
+ printf("delta_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG.\n");
+ ndcb0 = (NAND_CMD_SEQIN | (1<<21) | (3<<16));
+ column >>= 1; /* adjust for 16 bit bus */
+ ndcb1 = (((column>>1) & 0xff) |
+ ((page_addr<<8) & 0xff00) |
+ ((page_addr<<8) & 0xff0000) |
+ ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
+ event = NDSR_WRDREQ;
break;
+/* case NAND_CMD_SEQIN_pointer_operation: */
+
+/* /\* This is confusing because the command names are */
+/* * different compared to the ones in the K9K12Q0C */
+/* * datasheet. Infact this has nothing to do with */
+/* * reading, as the but with page programming */
+/* * (writing). */
+/* * Here we send the multibyte commands */
+/* * cmd1=0x00, cmd2=0x80 (for programming main area) or */
+/* * cmd1=0x50, cmd2=0x80 (for spare area) */
+/* * */
+/* * When all data is written to the buffer, the page */
+/* * program command (0x10) is sent to actually write */
+/* * the data. */
+/* *\/ */
+
+/* printf("delta_cmdfunc: NAND_CMD_SEQIN pointer op called.\n"); */
+
+/* ndcb0 = (NAND_CMD_SEQIN<<8) | (1<<21) | (1<<19) | (4<<16); */
+/* if(column >= mtd->oobblock) { */
+/* /\* OOB area *\/ */
+/* column -= mtd->oobblock; */
+/* ndcb0 |= NAND_CMD_READOOB; */
+/* } else if (column < 256) { */
+/* /\* First 256 bytes --> READ0 *\/ */
+/* ndcb0 |= NAND_CMD_READ0; */
+/* } else { */
+/* /\* Only for 8 bit devices - not delta!!! *\/ */
+/* column -= 256; */
+/* ndcb0 |= NAND_CMD_READ1; */
+/* } */
+/* event = NDSR_WRDREQ; */
+/* break; */
case NAND_CMD_STATUS:
- return;
+ /* oh, this is not nice. for some reason the real
+ * status byte is in the second read from the data
+ * buffer. The hack is to read the first byte right
+ * here, so the next read access by the nand code
+ * yields the right one.
+ */
+ ndcb0 = (NAND_CMD_STATUS | (4<<21));
+ event = NDSR_RDDREQ;
+ NDCB0 = ndcb0;
+ NDCB0 = ndcb1;
+ NDCB0 = ndcb2;
+ delta_wait_event(event);
+ what_the_hack = NDDB;
+ goto end;
+ break;
case NAND_CMD_RESET:
- return;
+ printf("delta_cmdfunc: NAND_CMD_RESET unimplemented.\n");
+ break;
default:
printk("delta_cmdfunc: error, unsupported command.\n");
return;
@@ -194,6 +309,8 @@
/* wait for event */
delta_wait_event(event);
+ end:
+ return;
}
static void delta_dfc_gpio_init()
@@ -251,23 +368,6 @@
* Members with a "?" were not set in the merged testing-NAND branch,
* so they are not set here either.
*/
-void wait(unsigned long us)
-{
-#define OSCR_CLK_FREQ 3.250 /* kHz */
-
- unsigned long start = OSCR;
- unsigned long delta = 0, cur;
- us *= OSCR_CLK_FREQ;
-
- while (delta < us) {
- cur = OSCR;
- if(cur < start) /* OSCR overflowed */
- delta = cur + (start^0xffffffff);
- else
- delta = cur - start;
- }
-}
-
void board_nand_init(struct nand_chip *nand)
{
unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;
@@ -402,13 +502,17 @@
nand->eccmode = NAND_ECC_SOFT;
nand->chip_delay = NAND_DELAY_US;
nand->options = NAND_BUSWIDTH_16;
+
nand->read_byte = delta_read_byte;
+ nand->write_byte = delta_write_byte;
+ nand->read_word = delta_read_word;
+ nand->write_word = delta_write_word;
nand->read_buf = delta_read_buf;
+ nand->write_buf = delta_write_buf;
nand->cmdfunc = delta_cmdfunc;
- /* nand->options = NAND_SAMSUNG_LP_OPTIONS; */
}
#else
-#error "U-Boot legacy NAND support not available for delta board."
+ #error "U-Boot legacy NAND support not available for delta board."
#endif
#endif