ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
This commit manages diversity for STM32M15x SOCs with:
- dedicated files to support all STM32MP15 SOCs family.
The differences between those SOCs are:
-STM32MP151 [1]: common file.
-STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU.
-STM32MP157 [3]: STM32MP153 + DSI + GPU.
- new files to manage security diversity on STM32MP15x SOCs.
On STM32MP15xY, "Y" gives information:
-Y = A means no cryp IP and no secure boot.
-Y = C means cryp IP + secure boot.
- stm32mp157 pinctrl files to better manage package diversity.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index 624bf69..d03d4cd 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -6,10 +6,10 @@
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -23,537 +23,4 @@
chosen {
stdout-path = "serial0:115200n8";
};
-
- memory@c0000000 {
- device_type = "memory";
- reg = <0xc0000000 0x20000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mcuram2: mcuram2@10000000 {
- compatible = "shared-dma-pool";
- reg = <0x10000000 0x40000>;
- no-map;
- };
-
- vdev0vring0: vdev0vring0@10040000 {
- compatible = "shared-dma-pool";
- reg = <0x10040000 0x1000>;
- no-map;
- };
-
- vdev0vring1: vdev0vring1@10041000 {
- compatible = "shared-dma-pool";
- reg = <0x10041000 0x1000>;
- no-map;
- };
-
- vdev0buffer: vdev0buffer@10042000 {
- compatible = "shared-dma-pool";
- reg = <0x10042000 0x4000>;
- no-map;
- };
-
- mcuram: mcuram@30000000 {
- compatible = "shared-dma-pool";
- reg = <0x30000000 0x40000>;
- no-map;
- };
-
- retram: retram@38000000 {
- compatible = "shared-dma-pool";
- reg = <0x38000000 0x10000>;
- no-map;
- };
-
- gpu_reserved: gpu@d4000000 {
- reg = <0xd4000000 0x4000000>;
- no-map;
- };
- };
-
- led {
- compatible = "gpio-leds";
- blue {
- label = "heartbeat";
- gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- };
-
- sound {
- compatible = "audio-graph-card";
- label = "STM32MP1-DK";
- routing =
- "Playback" , "MCLK",
- "Capture" , "MCLK",
- "MICL" , "Mic Bias";
- dais = <&sai2a_port &sai2b_port &i2s2_port>;
- status = "okay";
- };
-};
-
-&adc {
- pinctrl-names = "default";
- pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
- vdd-supply = <&vdd>;
- vdda-supply = <&vdd>;
- vref-supply = <&vrefbuf>;
- status = "disabled";
- adc1: adc@0 {
- /*
- * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
- * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
- * 5 * (56 + 47kOhms) * 5pF => 2.5us.
- * Use arbitrary margin here (e.g. 5us).
- */
- st,min-sample-time-nsecs = <5000>;
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 6 13 18 19>;
- status = "okay";
- };
- adc2: adc@100 {
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 2 6 18 19>;
- st,min-sample-time-nsecs = <5000>;
- status = "okay";
- };
-};
-
-&cec {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cec_pins_b>;
- pinctrl-1 = <&cec_pins_sleep_b>;
- status = "okay";
-};
-
-ðernet0 {
- status = "okay";
- pinctrl-0 = <ðernet0_rgmii_pins_a>;
- pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rgmii-id";
- max-speed = <1000>;
- phy-handle = <&phy0>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-};
-
-&gpu {
- contiguous-area = <&gpu_reserved>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_a>;
- pinctrl-1 = <&i2c1_pins_sleep_a>;
- i2c-scl-rising-time-ns = <100>;
- i2c-scl-falling-time-ns = <7>;
- status = "okay";
- /delete-property/dmas;
- /delete-property/dma-names;
-
- hdmi-transmitter@39 {
- compatible = "sil,sii9022";
- reg = <0x39>;
- iovcc-supply = <&v3v3_hdmi>;
- cvcc12-supply = <&v1v2_hdmi>;
- reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpiog>;
- #sound-dai-cells = <0>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- sii9022_in: endpoint {
- remote-endpoint = <<dc_ep0_out>;
- };
- };
-
- port@3 {
- reg = <3>;
- sii9022_tx_endpoint: endpoint {
- remote-endpoint = <&i2s2_endpoint>;
- };
- };
- };
- };
-
- cs42l51: cs42l51@4a {
- compatible = "cirrus,cs42l51";
- reg = <0x4a>;
- #sound-dai-cells = <0>;
- VL-supply = <&v3v3>;
- VD-supply = <&v1v8_audio>;
- VA-supply = <&v1v8_audio>;
- VAHP-supply = <&v1v8_audio>;
- reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
- clocks = <&sai2a>;
- clock-names = "MCLK";
- status = "okay";
-
- cs42l51_port: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs42l51_tx_endpoint: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
- };
-
- cs42l51_rx_endpoint: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
- };
- };
- };
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
- /* spare dmas for other usage */
- /delete-property/dmas;
- /delete-property/dma-names;
-
- typec: stusb1600@28 {
- compatible = "st,stusb1600";
- reg = <0x28>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpioi>;
- pinctrl-names = "default";
- pinctrl-0 = <&stusb1600_pins_a>;
-
- status = "okay";
-
- typec_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- power-role = "sink";
- power-opmode = "default";
- };
- };
-
- pmic: stpmic@33 {
- compatible = "st,stpmic1";
- reg = <0x33>;
- interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- status = "okay";
-
- regulators {
- compatible = "st,stpmic1-regulators";
- ldo1-supply = <&v3v3>;
- ldo3-supply = <&vdd_ddr>;
- ldo6-supply = <&v3v3>;
- pwr_sw1-supply = <&bst_out>;
- pwr_sw2-supply = <&bst_out>;
-
- vddcore: buck1 {
- regulator-name = "vddcore";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd_ddr: buck2 {
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd: buck3 {
- regulator-name = "vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- st,mask-reset;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- v3v3: buck4 {
- regulator-name = "v3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-over-current-protection;
- regulator-initial-mode = <0>;
- };
-
- v1v8_audio: ldo1 {
- regulator-name = "v1v8_audio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO1 0>;
- };
-
- v3v3_hdmi: ldo2 {
- regulator-name = "v3v3_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO2 0>;
- };
-
- vtt_ddr: ldo3 {
- regulator-name = "vtt_ddr";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- vdd_usb: ldo4 {
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- interrupts = <IT_CURLIM_LDO4 0>;
- };
-
- vdda: ldo5 {
- regulator-name = "vdda";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- interrupts = <IT_CURLIM_LDO5 0>;
- regulator-boot-on;
- };
-
- v1v2_hdmi: ldo6 {
- regulator-name = "v1v2_hdmi";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO6 0>;
- };
-
- vref_ddr: vref_ddr {
- regulator-name = "vref_ddr";
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- bst_out: boost {
- regulator-name = "bst_out";
- interrupts = <IT_OCP_BOOST 0>;
- };
-
- vbus_otg: pwr_sw1 {
- regulator-name = "vbus_otg";
- interrupts = <IT_OCP_OTG 0>;
- };
-
- vbus_sw: pwr_sw2 {
- regulator-name = "vbus_sw";
- interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge = <1>;
- };
- };
-
- onkey {
- compatible = "st,stpmic1-onkey";
- interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
- interrupt-names = "onkey-falling", "onkey-rising";
- power-off-time-sec = <10>;
- status = "okay";
- };
-
- watchdog {
- compatible = "st,stpmic1-wdt";
- status = "disabled";
- };
- };
-};
-
-&i2s2 {
- clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "i2sclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2s2_pins_a>;
- pinctrl-1 = <&i2s2_pins_sleep_a>;
- status = "okay";
-
- i2s2_port: port {
- i2s2_endpoint: endpoint {
- remote-endpoint = <&sii9022_tx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- };
- };
-};
-
-&ipcc {
- status = "okay";
-};
-
-&iwdg2 {
- timeout-sec = <32>;
- status = "okay";
-};
-
-<dc {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <<dc_pins_a>;
- pinctrl-1 = <<dc_pins_sleep_a>;
- status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&sii9022_in>;
- };
- };
-};
-
-&m4_rproc {
- memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
- <&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
- interrupt-parent = <&exti>;
- interrupts = <68 1>;
- status = "okay";
-};
-
-&pwr_regulators {
- vdd-supply = <&vdd>;
- vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
- status = "okay";
-};
-
-&rtc {
- status = "okay";
-};
-
-&sai2 {
- clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
- pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
-
- sai2a: audio-controller@4400b004 {
- #clock-cells = <0>;
- dma-names = "tx";
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- status = "okay";
-
- sai2a_port: port {
- sai2a_endpoint: endpoint {
- remote-endpoint = <&cs42l51_tx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
- };
- };
-
- sai2b: audio-controller@4400b024 {
- dma-names = "rx";
- st,sync = <&sai2a 2>;
- clocks = <&rcc SAI2_K>, <&sai2a>;
- clock-names = "sai_ck", "MCLK";
- status = "okay";
-
- sai2b_port: port {
- sai2b_endpoint: endpoint {
- remote-endpoint = <&cs42l51_rx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
- };
- };
-};
-
-&sdmmc1 {
- pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
- pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
- broken-cd;
- st,neg-edge;
- bus-width = <4>;
- vmmc-supply = <&v3v3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
-
-&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
- status = "okay";
-};
-
-&usbotg_hs {
- dr_mode = "peripheral";
- phys = <&usbphyc_port1 0>;
- phy-names = "usb2-phy";
- status = "okay";
-};
-
-&usbphyc {
- status = "okay";
-};
-
-&usbphyc_port0 {
- phy-supply = <&vdd_usb>;
-};
-
-&usbphyc_port1 {
- phy-supply = <&vdd_usb>;
-};
-
-&vrefbuf {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- vdda-supply = <&vdd>;
- status = "okay";
};