commit 1b51e5f4cd2a62673a5391a5e8d47a03daf1c12d
author Troy Kisky <troy.kisky@boundarydevices.com> Mon Jul 29 12:15:56 2019 -0700
committer Stefano Babic <sbabic@denx.de> Tue Oct 08 16:35:16 2019 +0200
tree 71dd8f989088afa1d5b5bb6af8c9d3895532e66c
parent cdcaee95188fe8ca75e9701680ce14129c193de0

nitrogen6x: reserve used gpios

This prevents messages like
gpio@20a0000: get_value: error: gpio GPIO2_2 not reserved

when CONFIG_DM_GPIO is enabled.

Also, when CONFIG_DM_GPIO is enabled, checkboard is too
early to use gpio_get_value, so read it directly on failure.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

board/boundary/nitrogen6x/nitrogen6x.c

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 26af3f7..33653b5 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -382,6 +382,15 @@
 	struct phy_device *phydev = NULL;
 	int ret;
 
+	gpio_request(WL12XX_WL_IRQ_GP, "wifi_irq");
+	gpio_request(IMX_GPIO_NR(6, 30), "rgmii_rxc");
+	gpio_request(IMX_GPIO_NR(6, 25), "rgmii_rd0");
+	gpio_request(IMX_GPIO_NR(6, 27), "rgmii_rd1");
+	gpio_request(IMX_GPIO_NR(6, 28), "rgmii_rd2");
+	gpio_request(IMX_GPIO_NR(6, 29), "rgmii_rd3");
+	gpio_request(IMX_GPIO_NR(6, 24), "rgmii_rx_ctl");
+	gpio_request(IMX_GPIO_NR(3, 23), "rgmii_reset_sabrelite");
+	gpio_request(IMX_GPIO_NR(1, 27), "rgmii_reset_nitrogen6x");
 	setup_iomux_enet();
 
 #ifdef CONFIG_FEC_MXC
@@ -912,7 +921,16 @@
 
 int checkboard(void)
 {
-	if (gpio_get_value(WL12XX_WL_IRQ_GP))
+	int ret = gpio_get_value(WL12XX_WL_IRQ_GP);
+
+	if (ret < 0) {
+		/* The gpios have not been probed yet. Read it myself */
+		struct gpio_regs *regs = (struct gpio_regs *)GPIO6_BASE_ADDR;
+		int gpio = WL12XX_WL_IRQ_GP & 0x1f;
+
+		ret = (readl(&regs->gpio_psr) >> gpio) & 0x01;
+	}
+	if (ret)
 		puts("Board: Nitrogen6X\n");
 	else
 		puts("Board: SABRE Lite\n");
@@ -1014,6 +1032,16 @@
 
 int misc_init_r(void)
 {
+	gpio_request(RGB_BACKLIGHT_GP, "lvds backlight");
+	gpio_request(LVDS_BACKLIGHT_GP, "lvds backlight");
+	gpio_request(GP_USB_OTG_PWR, "usbotg power");
+	gpio_request(IMX_GPIO_NR(7, 12), "usbh1 hub reset");
+	gpio_request(IMX_GPIO_NR(2, 2), "back");
+	gpio_request(IMX_GPIO_NR(2, 4), "home");
+	gpio_request(IMX_GPIO_NR(2, 1), "menu");
+	gpio_request(IMX_GPIO_NR(2, 3), "search");
+	gpio_request(IMX_GPIO_NR(7, 13), "volup");
+	gpio_request(IMX_GPIO_NR(4, 5), "voldown");
 #ifdef CONFIG_PREBOOT
 	preboot_keys();
 #endif