Fix remaining CONFIG_COMMANDS
update comments
Fix coding style
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index 80c4ba2..55ef346 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -165,7 +165,7 @@
addr[0], addr[1],
addr[2], addr[3],
addr[4], addr[5]) ;
- debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+ debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
setenv ("ethaddr", ethaddr);
}
@@ -317,6 +317,6 @@
return 0;
}
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index ecdcbd9..51cfb7e 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -36,12 +36,12 @@
* AUI/TP selection ( mine has 10Base2/10BaseT select )
*
* Arguments:
- * io = for the base address
+ * io = for the base address
* irq = for the IRQ
*
* author:
- * Erik Stahlman ( erik@vt.edu )
- * Daris A Nevil ( dnevil@snmc.com )
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
*
*
* Hardware multicast code from Peter Cammaert ( pc@denkart.be )
@@ -53,7 +53,7 @@
* o lan91c96.c (Intel Diagnostic Manager driver)
*
* History:
- * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
+ * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
* for lan91c96
*---------------------------------------------------------------------------
*/
@@ -296,8 +296,8 @@
/*
* Function: smc_reset( void )
* Purpose:
- * This sets the SMC91111 chip to its normal state, hopefully from whatever
- * mess that any other DOS driver has put it in.
+ * This sets the SMC91111 chip to its normal state, hopefully from whatever
+ * mess that any other DOS driver has put it in.
*
* Maybe I should reset more registers to defaults in here? SOFTRST should
* do that for me.
@@ -397,7 +397,7 @@
* This sends the actual packet to the SMC9xxx chip.
*
* Algorithm:
- * First, see if a saved_skb is available.
+ * First, see if a saved_skb is available.
* ( this should NOT be called if there is no 'saved_skb'
* Now, find the packet number that the chip allocated
* Point the data pointers at it in memory
@@ -405,9 +405,9 @@
* Dump the packet to chip memory
* Check if a last byte is needed ( odd length packet )
* if so, set the control flag right
- * Tell the card to send it
+ * Tell the card to send it
* Enable the transmit interrupt, so I know if it failed
- * Free the kernel data if I actually sent it.
+ * Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
@@ -865,7 +865,7 @@
}
#endif /* 0 */
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
/* smc_get_ethaddr (bd_t * bd)
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index a99ee5d..ecf45dc 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -29,7 +29,6 @@
#include "netarm_eth.h"
#include <asm/arch/netarm_registers.h>
-
#if defined(CONFIG_CMD_NET)
static int na_mii_poll_busy (void);
@@ -56,7 +55,6 @@
setenv ("ethaddr", ethaddr);
}
-
static void na_mii_write (int reg, int value)
{
int mii_addr;
@@ -355,6 +353,6 @@
return 1;
}
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/rtl8019.c b/drivers/net/rtl8019.c
index 409a69f..9d62cab 100644
--- a/drivers/net/rtl8019.c
+++ b/drivers/net/rtl8019.c
@@ -36,16 +36,13 @@
#if defined(CONFIG_CMD_NET)
-
/* packet page register access functions */
-
static unsigned char get_reg (unsigned int regno)
{
return (*(unsigned char *) regno);
}
-
static void put_reg (unsigned int regno, unsigned char val)
{
*(volatile unsigned char *) regno = val;
@@ -91,7 +88,6 @@
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
}
-
void eth_halt (void)
{
put_reg (RTL8019_COMMAND, 0x01);
@@ -134,7 +130,6 @@
return 0;
}
-
static unsigned char nic_to_pc (void)
{
unsigned char rec_head_status;
@@ -277,6 +272,6 @@
return 0;
}
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_RTL8019 */
diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c
index 6c94ae1..9122f12 100644
--- a/drivers/rtc/rx8025.c
+++ b/drivers/rtc/rx8025.c
@@ -142,7 +142,6 @@
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
}
-
/*
* Set the RTC
*/
@@ -166,7 +165,6 @@
rtc_write (RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
}
-
/*
* Reset the RTC. We setting the date back to 1970-01-01.
*/
@@ -200,7 +198,6 @@
return;
}
-
/*
* Helper functions
*/
@@ -224,4 +221,4 @@
return (((n / 10) << 4) | (n % 10));
}
-#endif /* CONFIG_RTC_RX8025 && (CFG_COMMANDS & CFG_CMD_DATE) */
+#endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */