clk: sifive: fu540-prci: Release ethernet clock reset
U-Boot ethernet works with FSBL flow where releasing ethernet clock
reset is part of FSBL itself but with the SPL, We need to release
ethernet clock reset explicitly for U-Boot proper. With this change
Release ethernet clock reset code in FSBL might not be needed or
unaffected.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index 3728aa5..fe6e0d4 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -560,6 +560,25 @@
asm volatile ("nop");
}
+/**
+ * __prci_ethernet_release_reset() - Release ethernet reset
+ * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg
+ *
+ */
+static void __prci_ethernet_release_reset(struct __prci_data *pd)
+{
+ u32 v;
+
+ /* Release GEMGXL reset */
+ v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET);
+ v |= PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK;
+ __prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd);
+
+ /* Procmon => core clock */
+ __prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET,
+ pd);
+}
+
/*
* PRCI integration data for each WRPLL instance
*/
@@ -580,6 +599,7 @@
static struct __prci_wrpll_data __prci_gemgxlpll_data = {
.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
.cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
+ .release_reset = __prci_ethernet_release_reset,
};
/*