global: Use proper project name U-Boot
Use proper project name in comments, Kconfig, readmes.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
diff --git a/board/synopsys/hsdk/hsdk.c b/board/synopsys/hsdk/hsdk.c
index 4308c7e..6cbc89a 100644
--- a/board/synopsys/hsdk/hsdk.c
+++ b/board/synopsys/hsdk/hsdk.c
@@ -583,7 +583,7 @@
*
* Please read ARC HS Development IC Specification, section 17.2 for more
* information about apertures configuration.
- * NOTE: we intentionally modify default settings in U-boot. Default settings
+ * NOTE: we intentionally modify default settings in U-Boot. Default settings
* are specified in "Table 111 CREG Address Decoder register reset values".
*/
@@ -942,7 +942,7 @@
int ret;
if (board_mismatch()) {
- printf("ERR: U-boot is not configured for this board!\n");
+ printf("ERR: U-Boot is not configured for this board!\n");
return CMD_RET_FAILURE;
}
@@ -983,10 +983,10 @@
/*
* We may simply use static variable here to store init status, but we also want
- * to avoid the situation when we reload U-boot via MDB after previous
+ * to avoid the situation when we reload U-Boot via MDB after previous
* init is done but HW reset (board reset) isn't done. So let's store the
* init status in any unused register (i.e CREG_CPU_0_ENTRY) so status will
- * survive after U-boot is reloaded via MDB.
+ * survive after U-Boot is reloaded via MDB.
*/
#define INIT_MARKER_REGISTER ((void __iomem *)CREG_CPU_0_ENTRY)
/* must be equal to INIT_MARKER_REGISTER reset value */
@@ -1008,7 +1008,7 @@
int ret;
if (board_mismatch()) {
- printf("ERR: U-boot is not configured for this board!\n");
+ printf("ERR: U-Boot is not configured for this board!\n");
return CMD_RET_FAILURE;
}
@@ -1258,11 +1258,11 @@
printf("Board: Synopsys %s\n", board_name(get_board_type_runtime()));
if (board_mismatch())
- printf("WARN: U-boot is configured NOT for this board but for %s!\n",
+ printf("WARN: U-Boot is configured NOT for this board but for %s!\n",
board_name(get_board_type_config()));
reg = readl(CREG_AXI_M_HS_CORE_BOOT) & CREG_CORE_BOOT_IMAGE;
- printf("U-boot autostart: %s\n", reg ? "enabled" : "disabled");
+ printf("U-Boot autostart: %s\n", reg ? "enabled" : "disabled");
return 0;
};