siemens: configs/capricorn_cxg3_defconfig: updates
make savedefconfig and add SCU_WDT and fix environment
offsets, as since silicon c0 the boot container takes place
at offset 0 and so the u-boot-env must be moved outside of
the boot container area.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
diff --git a/configs/capricorn_cxg3_defconfig b/configs/capricorn_cxg3_defconfig
index d2bcc46..2764455 100644
--- a/configs/capricorn_cxg3_defconfig
+++ b/configs/capricorn_cxg3_defconfig
@@ -10,7 +10,7 @@
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
+CONFIG_ENV_OFFSET=0x200000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3"
CONFIG_SPL_TEXT_BASE=0x100000
@@ -26,7 +26,7 @@
CONFIG_SYS_BOOTM_LEN=0x800000
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x2000
+CONFIG_ENV_OFFSET_REDUND=0x202000
CONFIG_IDENT_STRING=" ##v01.06"
CONFIG_REMAKE_ELF=y
# CONFIG_EFI_LOADER is not set
@@ -56,9 +56,10 @@
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
@@ -113,10 +114,13 @@
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=5
CONFIG_MV88E61XX_PHY_PORTS=0x7
+CONFIG_DM_ETH_PHY=y
CONFIG_FEC_MXC_SHARE_MDIO=y
CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
CONFIG_FEC_MXC=y
CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8=y
@@ -130,5 +134,7 @@
CONFIG_FSL_LPUART=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_SPL_WDT is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_WDT=y
+CONFIG_WDT_SIEMENS_PMIC=y
CONFIG_SPL_TINY_MEMSET=y