sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Defined bank addr code on CONFIG_SPI_FLASH_BAR macro, to reduce the
size for existing boards which has < 16Mbytes SPI flashes.
It's upto user which has provision to use the bank addr code for
flashes which has > 16Mbytes.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 562f6ad..f05f8f4 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -74,7 +74,7 @@
unsigned long page_addr, byte_addr, page_size;
size_t chunk_len, actual;
int ret;
- u8 cmd[4], bank_sel;
+ u8 cmd[4];
page_size = flash->page_size;
@@ -86,6 +86,9 @@
cmd[0] = CMD_PAGE_PROGRAM;
for (actual = 0; actual < len; actual += chunk_len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 bank_sel;
+
bank_sel = offset / SPI_FLASH_16MB_BOUN;
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
@@ -93,7 +96,7 @@
debug("SF: fail to set bank%d\n", bank_sel);
return ret;
}
-
+#endif
page_addr = offset / page_size;
byte_addr = offset % page_size;
chunk_len = min(len - actual, page_size - byte_addr);
@@ -148,7 +151,7 @@
int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
size_t len, void *data)
{
- u8 cmd[5], bank_sel;
+ u8 cmd[5], bank_sel = 0;
u32 remain_len, read_len;
int ret = -1;
@@ -162,6 +165,7 @@
cmd[4] = 0x00;
while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
bank_sel = offset / SPI_FLASH_16MB_BOUN;
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
@@ -169,7 +173,7 @@
debug("SF: fail to set bank%d\n", bank_sel);
return ret;
}
-
+#endif
remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
if (len < remain_len)
read_len = len;
@@ -240,7 +244,7 @@
{
u32 erase_size;
int ret;
- u8 cmd[4], bank_sel;
+ u8 cmd[4];
erase_size = flash->sector_size;
if (offset % erase_size || len % erase_size) {
@@ -260,6 +264,9 @@
cmd[0] = CMD_ERASE_64K;
while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 bank_sel;
+
bank_sel = offset / SPI_FLASH_16MB_BOUN;
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
@@ -267,7 +274,7 @@
debug("SF: fail to set bank%d\n", bank_sel);
return ret;
}
-
+#endif
spi_flash_addr(offset, cmd);
debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
@@ -321,6 +328,7 @@
return 0;
}
+#ifdef CONFIG_SPI_FLASH_BAR
int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
{
u8 cmd;
@@ -389,6 +397,7 @@
return 0;
}
+#endif
#ifdef CONFIG_OF_CONTROL
int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
@@ -534,10 +543,12 @@
goto err_manufacturer_probe;
}
+#ifdef CONFIG_SPI_FLASH_BAR
/* Configure the BAR - disover bank cmds and read current bank */
ret = spi_flash_bank_config(flash, *idp);
if (ret < 0)
goto err_manufacturer_probe;
+#endif
#ifdef CONFIG_OF_CONTROL
if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {