include: am654_evm: Establish initial environment for SD card boot
Create a basic U-Boot environment that allows the automatic loading
of a Linux Kernel located at /boot/Image and an associated device tree
blob located at /boot/k3-am654-base-board.dtb from the secondary
partition of an ext4-formatted SD card on the AM654x EVM. Furthermore
the boot.scr and uEnv.txt detection and loading schemes are supported
in a manner already known from other TI platforms.
Note that this is intended to be a starting point to enable initial
board use and will most certainly get extended and refactored as
different boot media become available.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index 90dd9f3..65015df 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -11,6 +11,7 @@
#include <linux/sizes.h>
#include <config_distro_bootcmd.h>
+#include <environment/ti/mmc.h>
#define CONFIG_ENV_SIZE (128 << 10)
@@ -28,6 +29,40 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4)
+/* U-Boot general configuration */
+#define EXTRA_ENV_AM65X_BOARD_SETTINGS \
+ "findfdt=" \
+ "if test $board_name = am65x; then " \
+ "setenv name_fdt k3-am654-base-board.dtb; " \
+ "else if test $name_fdt = undefined; then " \
+ "echo WARNING: Could not determine device tree to use;"\
+ "fi; fi; " \
+ "setenv fdtfile ${name_fdt}\0" \
+ "loadaddr=0x80080000\0" \
+ "fdtaddr=0x82000000\0" \
+ "name_kern=Image\0" \
+ "console=ttyS2,115200n8\0" \
+ "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
+ "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
+
+/* U-Boot MMC-specific configuration */
+#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
+ "boot=mmc\0" \
+ "mmcdev=1\0" \
+ "bootpart=1:2\0" \
+ "bootdir=/boot\0" \
+ "rd_spec=-\0" \
+ "init_mmc=run args_all args_mmc\0" \
+ "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
+ "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
+ "${bootdir}/${name_kern}\0"
+
+/* Incorporate settings into the U-Boot environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_MMC_TI_ARGS \
+ EXTRA_ENV_AM65X_BOARD_SETTINGS \
+ EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC
+
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>