x86: fsp: Configure SPI opcode registers before SPI is locked down
Some Intel FSP (like Braswell) does SPI lock-down during the call
to fsp_notify(INIT_PHASE_BOOT). But before SPI lock-down is done,
it's bootloader's responsibility to configure the SPI controller's
opcode registers properly otherwise SPI controller driver doesn't
know how to communicate with the SPI flash device.
This introduces a Kconfig option CONFIG_FSP_LOCKDOWN_SPI for such
FSPs. When it is on, U-Boot will configure the SPI opcode registers
before the lock-down.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c26710b..5373082 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -401,6 +401,15 @@
do not overwrite the important boot service data which is used by
FSP, otherwise the subsequent call to fsp_notify() will fail.
+config FSP_LOCKDOWN_SPI
+ bool
+ depends on HAVE_FSP
+ help
+ Some Intel FSP (like Braswell) does SPI lock-down during the call
+ to fsp_notify(INIT_PHASE_BOOT). This option should be turned on
+ for such FSP and U-Boot will configure the SPI opcode registers
+ before the lock-down.
+
config ENABLE_MRC_CACHE
bool "Enable MRC cache"
depends on !EFI && !SYS_COREBOOT
diff --git a/arch/x86/lib/fsp/fsp_common.c b/arch/x86/lib/fsp/fsp_common.c
index 3397bb8..1714d13 100644
--- a/arch/x86/lib/fsp/fsp_common.c
+++ b/arch/x86/lib/fsp/fsp_common.c
@@ -19,6 +19,8 @@
DECLARE_GLOBAL_DATA_PTR;
+extern void ich_spi_config_opcode(struct udevice *dev);
+
int checkcpu(void)
{
return 0;
@@ -49,6 +51,28 @@
{
u32 status;
+#ifdef CONFIG_FSP_LOCKDOWN_SPI
+ struct udevice *dev;
+
+ /*
+ * Some Intel FSP (like Braswell) does SPI lock-down during the call
+ * to fsp_notify(INIT_PHASE_BOOT). But before SPI lock-down is done,
+ * it's bootloader's responsibility to configure the SPI controller's
+ * opcode registers properly otherwise SPI controller driver doesn't
+ * know how to communicate with the SPI flash device.
+ *
+ * Note we cannot do such configuration elsewhere (eg: during the SPI
+ * controller driver's probe() routine), because:
+ *
+ * 1). U-Boot SPI controller driver does not set the lock-down bit
+ * 2). Any SPI transfer will corrupt the contents of these registers
+ *
+ * Hence we have to do it right here before SPI lock-down bit is set.
+ */
+ if (!uclass_first_device_err(UCLASS_SPI, &dev))
+ ich_spi_config_opcode(dev);
+#endif
+
/* call into FspNotify */
debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
status = fsp_notify(NULL, INIT_PHASE_BOOT);