| menu "Command line interface" |
| |
| config HUSH_PARSER |
| bool "Use hush shell" |
| select SYS_HUSH_PARSER |
| help |
| This option enables the "hush" shell (from Busybox) as command line |
| interpreter, thus enabling powerful command line syntax like |
| if...then...else...fi conditionals or `&&' and '||' |
| constructs ("shell scripts"). |
| |
| If disabled, you get the old, much simpler behaviour with a somewhat |
| smaller memory footprint. |
| |
| config SYS_HUSH_PARSER |
| bool |
| help |
| Backward compatibility. |
| |
| comment "Commands" |
| |
| menu "Info commands" |
| |
| config CMD_BDI |
| bool "bdinfo" |
| help |
| Print board info |
| |
| config CMD_CONSOLE |
| bool "coninfo" |
| help |
| Print console devices and information. |
| |
| config CMD_LICENSE |
| bool "license" |
| help |
| Print GPL license text |
| |
| endmenu |
| |
| menu "Boot commands" |
| |
| config CMD_BOOTD |
| bool "bootd" |
| help |
| Run the command stored in the environment "bootcmd", i.e. |
| "bootd" does the same thing as "run bootcmd". |
| |
| config CMD_BOOTM |
| bool "bootm" |
| default y |
| help |
| Boot an application image from the memory. |
| |
| config CMD_GO |
| bool "go" |
| default y |
| help |
| Start an application at a given address. |
| |
| config CMD_RUN |
| bool "run" |
| help |
| Run the command in the given environment variable. |
| |
| config CMD_IMI |
| bool "iminfo" |
| help |
| Print header information for application image. |
| |
| config CMD_IMLS |
| bool "imls" |
| help |
| List all images found in flash |
| |
| config CMD_XIMG |
| bool "imxtract" |
| help |
| Extract a part of a multi-image. |
| |
| endmenu |
| |
| menu "Environment commands" |
| |
| config CMD_EXPORTENV |
| bool "env export" |
| default y |
| help |
| Export environments. |
| |
| config CMD_IMPORTENV |
| bool "env import" |
| default y |
| help |
| Import environments. |
| |
| config CMD_EDITENV |
| bool "editenv" |
| help |
| Edit environment variable. |
| |
| config CMD_SAVEENV |
| bool "saveenv" |
| help |
| Run the command in the given environment variable. |
| |
| endmenu |
| |
| menu "Memory commands" |
| |
| config CMD_MEMORY |
| bool "md, mm, nm, mw, cp, cmp, base, loop" |
| help |
| Memeory commands. |
| md - memory display |
| mm - memory modify (auto-incrementing address) |
| nm - memory modify (constant address) |
| mw - memory write (fill) |
| cp - memory copy |
| cmp - memory compare |
| base - print or set address offset |
| loop - initinite loop on address range |
| |
| config CMD_CRC32 |
| bool "crc32" |
| default y |
| help |
| Compute CRC32. |
| |
| config LOOPW |
| bool "loopw" |
| help |
| Infinite write loop on address range |
| |
| config CMD_MEMTEST |
| bool "crc32" |
| help |
| Simple RAM read/write test. |
| |
| config CMD_MX_CYCLIC |
| bool "mdc, mwc" |
| help |
| mdc - memory display cyclic |
| mwc - memory write cyclic |
| |
| config CMD_MEMINFO |
| bool "meminfo" |
| help |
| Display memory information. |
| |
| endmenu |
| |
| menu "Device access commands" |
| |
| config CMD_DM |
| bool "dm - Access to driver model information" |
| depends on DM |
| default y |
| help |
| Provides access to driver model data structures and information, |
| such as a list of devices, list of uclasses and the state of each |
| device (e.g. activated). This is not required for operation, but |
| can be useful to see the state of driver model for debugging or |
| interest. |
| |
| config CMD_DEMO |
| bool "demo - Demonstration commands for driver model" |
| depends on DM |
| help |
| Provides a 'demo' command which can be used to play around with |
| driver model. To use this properly you will need to enable one or |
| both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). |
| Otherwise you will always get an empty list of devices. The demo |
| devices are defined in the sandbox device tree, so the easiest |
| option is to use sandbox and pass the -d point to sandbox's |
| u-boot.dtb file. |
| |
| config CMD_LOADB |
| bool "loadb" |
| help |
| Load a binary file over serial line. |
| |
| config CMD_LOADS |
| bool "loads" |
| help |
| Load an S-Record file over serial line |
| |
| config CMD_FLASH |
| bool "flinfo, erase, protect" |
| help |
| NOR flash support. |
| flinfo - print FLASH memory information |
| erase - FLASH memory |
| protect - enable or disable FLASH write protection |
| |
| config CMD_NAND |
| bool "nand" |
| help |
| NAND support. |
| |
| config CMD_SPI |
| bool "sspi" |
| help |
| SPI utility command. |
| |
| config CMD_I2C |
| bool "i2c" |
| help |
| I2C support. |
| |
| config CMD_USB |
| bool "usb" |
| help |
| USB support. |
| |
| config CMD_FPGA |
| bool "fpga" |
| help |
| FPGA support. |
| |
| endmenu |
| |
| |
| menu "Shell scripting commands" |
| |
| config CMD_ECHO |
| bool "echo" |
| help |
| Echo args to console |
| |
| config CMD_ITEST |
| bool "itest" |
| help |
| Return true/false on integer compare. |
| |
| config CMD_SOURCE |
| bool "source" |
| help |
| Run script from memory |
| |
| endmenu |
| |
| menu "Network commands" |
| |
| config CMD_NET |
| bool "bootp, tftpboot" |
| help |
| Network commands. |
| bootp - boot image via network using BOOTP/TFTP protocol |
| tftpboot - boot image via network using TFTP protocol |
| |
| config CMD_TFTPPUT |
| bool "tftp put" |
| help |
| TFTP put command, for uploading files to a server |
| |
| config CMD_TFTPSRV |
| bool "tftpsrv" |
| help |
| Act as a TFTP server and boot the first received file |
| |
| config CMD_RARP |
| bool "rarpboot" |
| help |
| Boot image via network using RARP/TFTP protocol |
| |
| config CMD_DHCP |
| bool "dhcp" |
| help |
| Boot image via network using DHCP/TFTP protocol |
| |
| config CMD_NFS |
| bool "nfs" |
| help |
| Boot image via network using NFS protocol. |
| |
| config CMD_PING |
| bool "ping" |
| help |
| Send ICMP ECHO_REQUEST to network host |
| |
| config CMD_CDP |
| bool "cdp" |
| help |
| Perform CDP network configuration |
| |
| config CMD_SNTP |
| bool "sntp" |
| help |
| Synchronize RTC via network |
| |
| config CMD_DNS |
| bool "dns" |
| help |
| Lookup the IP of a hostname |
| |
| config CMD_DNS |
| bool "dns" |
| help |
| Lookup the IP of a hostname |
| |
| config CMD_LINK_LOCAL |
| bool "linklocal" |
| help |
| Acquire a network IP address using the link-local protocol |
| |
| endmenu |
| |
| menu "Misc commands" |
| |
| config CMD_TIME |
| bool "time" |
| help |
| Run commands and summarize execution time. |
| |
| # TODO: rename to CMD_SLEEP |
| config CMD_MISC |
| bool "sleep" |
| help |
| Delay execution for some time |
| |
| config CMD_TIMER |
| bool "timer" |
| help |
| Access the system timer. |
| |
| config CMD_SETGETDCR |
| bool "getdcr, setdcr, getidcr, setidcr" |
| depends on 4xx |
| help |
| getdcr - Get an AMCC PPC 4xx DCR's value |
| setdcr - Set an AMCC PPC 4xx DCR's value |
| getidcr - Get a register value via indirect DCR addressing |
| setidcr - Set a register value via indirect DCR addressing |
| |
| endmenu |
| |
| endmenu |