arm: dts: dm8x: Non-functional changes sync with v6.3-rc6
This is a collection of all the whitespace, renames, comment, and other
changes that should not change the DT functionality from Linux v6.3-rc6.
Signed-off-by: Andrew Davis <afd@ti.com>
diff --git a/arch/arm/dts/da850-evm.dts b/arch/arm/dts/da850-evm.dts
index 7e865bb..378af9f 100644
--- a/arch/arm/dts/da850-evm.dts
+++ b/arch/arm/dts/da850-evm.dts
@@ -52,15 +52,15 @@
enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
panel-info {
- ac-bias = <255>;
- ac-bias-intrpt = <0>;
- dma-burst-sz = <16>;
- bpp = <16>;
- fdd = <0x80>;
- sync-edge = <0>;
- sync-ctrl = <1>;
- raster-order = <0>;
- fifo-th = <0>;
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
};
display-timings {
@@ -265,7 +265,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64";
diff --git a/arch/arm/dts/da850-lego-ev3.dts b/arch/arm/dts/da850-lego-ev3.dts
index 6d781d5..7207d12 100644
--- a/arch/arm/dts/da850-lego-ev3.dts
+++ b/arch/arm/dts/da850-lego-ev3.dts
@@ -22,7 +22,7 @@
stdout-path = &serial1;
};
- memory {
+ memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x04000000>;
};
diff --git a/arch/arm/dts/da850.dtsi b/arch/arm/dts/da850.dtsi
index e6e78b8..c96f64b 100644
--- a/arch/arm/dts/da850.dtsi
+++ b/arch/arm/dts/da850.dtsi
@@ -369,7 +369,7 @@
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
- reg = <0x0 0x8000>;
+ reg = <0x0 0x8000>;
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -380,14 +380,14 @@
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
- reg = <0x8000 0x400>;
+ reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 1>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
- reg = <0x8400 0x400>;
+ reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 2>;
@@ -395,7 +395,7 @@
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
- reg = <0x230000 0x8000>;
+ reg = <0x230000 0x8000>;
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -406,7 +406,7 @@
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
- reg = <0x238000 0x400>;
+ reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc1 21>;
@@ -543,7 +543,7 @@
power-domains = <&psc1 17>;
status = "disabled";
};
- ecap0: ecap@306000 {
+ ecap0: pwm@306000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
@@ -553,7 +553,7 @@
power-domains = <&psc1 20>;
status = "disabled";
};
- ecap1: ecap@307000 {
+ ecap1: pwm@307000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
@@ -563,7 +563,7 @@
power-domains = <&psc1 20>;
status = "disabled";
};
- ecap2: ecap@308000 {
+ ecap2: pwm@308000 {
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
@@ -627,7 +627,7 @@
cppi41dma: dma-controller@201000 {
compatible = "ti,da830-cppi41";
- reg = <0x201000 0x1000
+ reg = <0x201000 0x1000
0x202000 0x1000
0x204000 0x4000>;
reg-names = "controller",
diff --git a/arch/arm/dts/dm8168-evm.dts b/arch/arm/dts/dm8168-evm.dts
index 2a457c9..70255ab 100644
--- a/arch/arm/dts/dm8168-evm.dts
+++ b/arch/arm/dts/dm8168-evm.dts
@@ -116,19 +116,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
@@ -139,7 +139,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
- m25p80@0 {
+ flash@0 {
compatible = "w25x32";
spi-max-frequency = <48000000>;
reg = <0>;
diff --git a/arch/arm/dts/dm816x.dtsi b/arch/arm/dts/dm816x.dtsi
index ae2d938..c4a8653 100644
--- a/arch/arm/dts/dm816x.dtsi
+++ b/arch/arm/dts/dm816x.dtsi
@@ -63,8 +63,11 @@
ranges;
prcm: prcm@48180000 {
- compatible = "ti,dm816-prcm";
+ compatible = "ti,dm816-prcm", "simple-bus";
reg = <0x48180000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48180000 0x4000>;
prcm_clocks: clocks {
#address-cells = <1>;
@@ -86,6 +89,8 @@
dm816x_pinmux: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0x50a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xf>;
@@ -121,6 +126,8 @@
};
scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
};
scrm_clockdomains: clockdomains {
@@ -228,7 +235,7 @@
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
- mbox_dsp: mbox_dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <0 0 0>;
};
@@ -364,7 +371,7 @@
ti,timer-pwm;
};
- uart1: uart@48020000 {
+ uart1: serial@48020000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart1";
reg = <0x48020000 0x2000>;
@@ -374,7 +381,7 @@
dma-names = "tx", "rx";
};
- uart2: uart@48022000 {
+ uart2: serial@48022000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart2";
reg = <0x48022000 0x2000>;
@@ -384,7 +391,7 @@
dma-names = "tx", "rx";
};
- uart3: uart@48024000 {
+ uart3: serial@48024000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart3";
reg = <0x48024000 0x2000>;