ARM: uniphier: dts: sync with Linux 4.20
Currently, the DWC3 USB node is out of sync because the bindings
for the UniPhier DWC3 PHY diverged between Linux and U-Boot.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi
index daf7453..f629c6a 100644
--- a/arch/arm/dts/uniphier-pxs3.dtsi
+++ b/arch/arm/dts/uniphier-pxs3.dtsi
@@ -144,6 +144,28 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
@@ -384,6 +406,50 @@
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
@@ -465,6 +531,109 @@
};
};
+ _usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb0: usb@65b00000 {
compatible = "socionext,uniphier-pxs3-dwc3";
status = "disabled";
@@ -483,6 +652,101 @@
};
};
+ _usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+ <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 21>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb1: usb@65d00000 {
compatible = "socionext,uniphier-pxs3-dwc3";
status = "disabled";
@@ -509,7 +773,8 @@
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};