ADS5121: fix out of tree build
and simplify Makefile a bit.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/Makefile b/Makefile
index 53a844c..f0d2227 100644
--- a/Makefile
+++ b/Makefile
@@ -496,7 +496,6 @@
icecube_5100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
- @ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ if [ "$(findstring DDR,$@)" ] ; \
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
@@ -537,7 +536,6 @@
lite5200b_LOWBOOT_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
- @ >$(obj)include/config.h
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ $(XECHO) "... DDR memory revision"
@ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
@@ -567,7 +565,6 @@
prs200_highboot_DDR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
- @ >$(obj)include/config.h
@[ -n "$(findstring highboot,$@)" ] || \
{ $(XECHO) "... with lowboot configuration" ; \
}
@@ -619,7 +616,6 @@
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
@@ -662,7 +658,6 @@
Total5200_Rev2_lowboot_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
- @ >$(obj)include/config.h
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
$(XECHO) "... with MGT5100 processor" ; \
@@ -697,7 +692,6 @@
TQM5200_STK100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/tqm5200
- @ >$(obj)include/config.h
@[ -z "$(findstring cam5200,$@)" ] || \
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
@@ -743,7 +737,7 @@
ads5121_config \
ads5121_PCI_config \
: unconfig
- @echo "" >$(obj)include/config.h
+ @mkdir -p $(obj)include
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
$(XECHO) "... with PCI enabled" ; \
@@ -807,7 +801,6 @@
GEN860T_SC_config \
GEN860T_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _SC,$@)" ] || \
{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
$(XECHO) "With reduced H/W feature set (SC)..." ; \
@@ -834,7 +827,6 @@
ICU862_100MHz_config \
ICU862_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
@@ -848,7 +840,6 @@
IVML24_128_config \
IVML24_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring IVML24_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
}
@@ -864,7 +855,6 @@
IVMS8_128_config \
IVMS8_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring IVMS8_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
}
@@ -906,7 +896,6 @@
NETVIA_V2_config \
NETVIA_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring NETVIA_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
$(XECHO) "... Version 1" ; \
@@ -922,7 +911,6 @@
NETPHONE_V2_config \
NETPHONE_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
}
@@ -942,7 +930,6 @@
NETTA_6412_config \
NETTA_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring ISDN_,$@)" ] || \
{ echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
}
@@ -968,7 +955,6 @@
NETTA2_V2_config \
NETTA2_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring NETTA2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
}
@@ -981,7 +967,6 @@
NC650_Rev2_config \
CP850_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring CP850,$@)" ] || \
{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
@@ -1033,7 +1018,6 @@
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
{ echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 64MHz system clock ..."; \
@@ -1107,7 +1091,6 @@
TK885D_config \
virtlab2_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
@@ -1352,7 +1335,6 @@
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring EVB_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
$(XECHO) "... BASIC model" ; \
@@ -1674,8 +1656,6 @@
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
$(XECHO) "... with PCI enabled" ; \
- else \
- >$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
$(XECHO) "... booting from 8-bit flash" ; \
@@ -1734,7 +1714,6 @@
TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
- >$(obj)include/config.h ; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
@@ -1757,7 +1736,7 @@
@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
TQM8272_config: unconfig
- @$(MKCONFIG) -a TQM8272 ppc mpc8260 tqm8272
+ @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@@ -1783,7 +1762,6 @@
M5235EVB_Flash16_config) FLASH=16;; \
M5235EVB_Flash32_config) FLASH=32;; \
esac; \
- >$(obj)include/config.h ; \
if [ "$${FLASH}" != "16" ] ; then \
echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
@@ -1806,14 +1784,12 @@
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @ >$(obj)include/config.h
@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @ >$(obj)include/config.h
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
@@ -1841,7 +1817,6 @@
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
- >$(obj)include/config.h ; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@@ -1851,7 +1826,6 @@
@case "$@" in \
M5373EVB_config) NAND=16;; \
esac; \
- >include/config.h ; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@@ -1873,7 +1847,6 @@
M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
esac; \
- >$(obj)include/config.h ; \
if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
@@ -1905,7 +1878,6 @@
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
- >include/config.h ; \
echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
@@ -1941,7 +1913,6 @@
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
- >include/config.h ; \
echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
@@ -1966,7 +1937,6 @@
MPC8313ERDB_33_config \
MPC8313ERDB_66_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
@@ -1989,7 +1959,6 @@
MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
@@ -2039,7 +2008,6 @@
MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
@@ -2070,7 +2038,6 @@
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
@@ -2080,7 +2047,6 @@
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
@@ -2113,7 +2079,6 @@
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) "... 33 MHz PCI" ; \
else \
@@ -2134,7 +2099,6 @@
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
@@ -2147,7 +2111,6 @@
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
@@ -2157,7 +2120,6 @@
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
@@ -2181,7 +2143,6 @@
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
else \
- >$(obj)include/config.h ; \
$(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
@@ -2197,7 +2158,6 @@
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
else \
- >$(obj)include/config.h ; \
$(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
@@ -2211,8 +2171,6 @@
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
$(XECHO) "... with 4 MiB flash memory" ; \
- else \
- >$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
@@ -2222,7 +2180,6 @@
TQM8560_config: unconfig
@mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
- >$(obj)include/config.h ; \
$(XECHO) "... TQM"$${CTYPE}; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
@@ -2459,7 +2416,6 @@
trab_old_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/trab
- @ >$(obj)include/config.h
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
@@ -2501,8 +2457,7 @@
gth2_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
@$(MKCONFIG) -a gth2 mips mips gth2
#########################################################################
@@ -2592,8 +2547,6 @@
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
$(XECHO) "... on SCPU board variant" ; \
- else \
- >$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
@@ -2658,7 +2611,6 @@
incaip_150MHz_config \
incaip_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
@@ -2681,44 +2633,37 @@
#########################################################################
dbau1000_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1100_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1500_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_el_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
pb1000_config : unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
qemu_mips_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_QEMU_MIPS 1" >>$(obj)include/config.h
+ @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
#########################################################################
@@ -2739,7 +2684,6 @@
DK1C20_standard_32_config \
DK1C20_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
@@ -2759,7 +2703,6 @@
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
@@ -2782,7 +2725,6 @@
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
$(XECHO) "... DNP/EVA2 configuration" ; \
@@ -2824,20 +2766,17 @@
#########################################################################
suzaku_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
+ @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
ml401_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
+ @echo "#define CONFIG_ML401 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
xupv2p_config: unconfig
@mkdir -p $(obj)include
- @ >$(obj)include/config.h
- @echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
+ @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
#========================================================================
@@ -2881,21 +2820,18 @@
## sh3 (Renesas SuperH)
#########################################################################
ms7720se_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_MS7720SE 1" >> include/config.h
+ @echo "#define CONFIG_MS7720SE 1" > include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
#########################################################################
## sh4 (Renesas SuperH)
#########################################################################
ms7750se_config: unconfig
- @ >$(obj)include/config.h
- @echo "#define CONFIG_MS7750SE 1" >> $(obj)include/config.h
+ @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
ms7722se_config : unconfig
- @ >$(obj)include/config.h
- @echo "#define CONFIG_MS7722SE 1" >> $(obj)include/config.h
+ @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
#########################################################################