board: ti: AM57xx: Add detection logic for AM57xx-evm
Current AM57xx evm supports both BeagleBoard-X15
(http://beagleboard.org/x15) and AM57xx EVM
(http://www.ti.com/tool/tmdxevm5728).
The AM572x EValuation Module(EVM) provides an affordable platform to
quickly start evaluation of Sitara. ARM Cortex-A15 AM57x Processors
(AM5728, AM5726, AM5718, AM5716) and accelerate development for HMI,
machine vision, networking, medical imaging and many other industrial
applications. This EVM is based on the same BeagleBoard-X15 Chassis
and adds mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's
wlink8 offering.
Since the EEPROM contents are compatible between the BeagleBoard-X15 and
the AM57xx-evm, we add support for the detection logic to enable
support for various user programmable scripting capability.
NOTE: U-boot configuration is currently a superset of AM57xx evm and
BeagleBoard-X15 and no additional configuration tweaking is needed.
This change also sets up the stage for future support of TI AM57xx EVMs
to the same base bootloader build.
Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
index bfa264e..f265b34 100644
--- a/arch/arm/cpu/armv7/omap5/Kconfig
+++ b/arch/arm/cpu/armv7/omap5/Kconfig
@@ -15,6 +15,7 @@
config TARGET_BEAGLE_X15
bool "BeagleBoard X15"
+ select TI_I2C_BOARD_DETECT
endchoice
diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig
index bdb7795..17745ff 100644
--- a/board/ti/am57xx/Kconfig
+++ b/board/ti/am57xx/Kconfig
@@ -9,4 +9,6 @@
config SYS_CONFIG_NAME
default "am57xx_evm"
+source "board/ti/common/Kconfig"
+
endif
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 042f9ab..d712ab0 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -30,8 +30,12 @@
#include <dwc3-omap-uboot.h>
#include <ti-usb-phy-uboot.h>
+#include "../common/board_detect.h"
#include "mux_data.h"
+#define board_is_x15() board_ti_is("BBRDX15_")
+#define board_is_am572x_evm() board_ti_is("AM572PM_")
+
#ifdef CONFIG_DRIVER_TI_CPSW
#include <cpsw.h>
#endif
@@ -41,8 +45,10 @@
/* GPIO 7_11 */
#define GPIO_DDR_VTT_EN 203
+#define SYSINFO_BOARD_NAME_MAX_LEN 45
+
const struct omap_sysinfo sysinfo = {
- "Board: BeagleBoard x15\n"
+ "Board: UNKNOWN(BeagleBoard X15?) REV UNKNOWN\n"
};
static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
@@ -246,6 +252,66 @@
.iva.pmic = &tps659038,
};
+#ifdef CONFIG_SPL_BUILD
+/* No env to setup for SPL */
+static inline void setup_board_eeprom_env(void) { }
+
+/* Override function to read eeprom information */
+void do_board_detect(void)
+{
+ int rc;
+
+ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS);
+ if (rc)
+ printf("ti_i2c_eeprom_init failed %d\n", rc);
+}
+
+#else /* CONFIG_SPL_BUILD */
+
+/* Override function to read eeprom information: actual i2c read done by SPL*/
+void do_board_detect(void)
+{
+ char *bname = NULL;
+ int rc;
+
+ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS);
+ if (rc)
+ printf("ti_i2c_eeprom_init failed %d\n", rc);
+
+ if (board_is_x15())
+ bname = "BeagleBoard X15";
+ else if (board_is_am572x_evm())
+ bname = "AM572x EVM";
+
+ if (bname)
+ snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
+ "Board: %s REV %s\n", bname, board_ti_get_rev());
+}
+
+static void setup_board_eeprom_env(void)
+{
+ char *name = "beagle_x15";
+ int rc;
+
+ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS);
+ if (rc)
+ goto invalid_eeprom;
+
+ if (board_is_am572x_evm())
+ name = "am57xx_evm";
+ else
+ printf("Unidentified board claims %s in eeprom header\n",
+ board_ti_get_name());
+
+invalid_eeprom:
+ set_board_info_env(name);
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
void hw_data_init(void)
{
*prcm = &dra7xx_prcm;
@@ -265,6 +331,8 @@
int board_late_init(void)
{
init_sata(0);
+ setup_board_eeprom_env();
+
/*
* DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
* This is the POWERHOLD-in-Low behavior.
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 6308cab..1fffdb1 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -88,4 +88,8 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+/* EEPROM */
+#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
+#define CONFIG_EEPROM_BUS_ADDRESS 0
+
#endif /* __CONFIG_AM57XX_EVM_H */
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index d164e6a..d373cbc 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -117,6 +117,8 @@
"setenv fdtfile dra72-evm.dtb; fi;" \
"if test $board_name = beagle_x15; then " \
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+ "if test $board_name = am57xx_evm; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \