| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2010-2013 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * (C) Copyright 2021 |
| * Svyatoslav Ryhel <clamor95@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdt_support.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/gp_padctrl.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/gpio.h> |
| #include <linux/delay.h> |
| #include "pinmux-config-grouper.h" |
| |
| #define TPS65911_I2C_ADDRESS 0x2D |
| |
| #define TPS65911_REG_LDO1 0x30 |
| #define TPS65911_REG_DEVCTRL 0x3F |
| #define DEVCTRL_PWR_OFF_MASK BIT(7) |
| #define DEVCTRL_DEV_ON_MASK BIT(2) |
| #define DEVCTRL_DEV_OFF_MASK BIT(0) |
| |
| #define MAX77663_I2C_ADDRESS 0x3C |
| |
| #define MAX77663_REG_SD2 0x18 |
| #define MAX77663_REG_LDO3 0x29 |
| #define MAX77663_REG_ONOFF_CFG1 0x41 |
| #define ONOFF_PWR_OFF BIT(1) |
| |
| #ifdef CONFIG_CMD_POWEROFF |
| #ifdef CONFIG_GROUPER_TPS65911 |
| int do_poweroff(struct cmd_tbl *cmdtp, |
| int flag, int argc, char *const argv[]) |
| { |
| struct udevice *dev; |
| uchar data_buffer[1]; |
| int ret; |
| |
| ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev); |
| if (ret) { |
| log_debug("cannot find PMIC I2C chip\n"); |
| return 0; |
| } |
| |
| ret = dm_i2c_read(dev, TPS65911_REG_DEVCTRL, data_buffer, 1); |
| if (ret) |
| return ret; |
| |
| data_buffer[0] |= DEVCTRL_PWR_OFF_MASK; |
| |
| ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1); |
| if (ret) |
| return ret; |
| |
| data_buffer[0] |= DEVCTRL_DEV_OFF_MASK; |
| data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK; |
| |
| ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1); |
| if (ret) |
| return ret; |
| |
| // wait some time and then print error |
| mdelay(5000); |
| |
| printf("Failed to power off!!!\n"); |
| return 1; |
| } |
| #endif /* CONFIG_GROUPER_TPS65911 */ |
| |
| #ifdef CONFIG_GROUPER_MAX77663 |
| int do_poweroff(struct cmd_tbl *cmdtp, |
| int flag, int argc, char *const argv[]) |
| { |
| struct udevice *dev; |
| uchar data_buffer[1]; |
| int ret; |
| |
| ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev); |
| if (ret) { |
| log_debug("cannot find PMIC I2C chip\n"); |
| return 0; |
| } |
| |
| ret = dm_i2c_read(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1); |
| if (ret) |
| return ret; |
| |
| data_buffer[0] |= ONOFF_PWR_OFF; |
| |
| ret = dm_i2c_write(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1); |
| if (ret) |
| return ret; |
| |
| // wait some time and then print error |
| mdelay(5000); |
| |
| printf("Failed to power off!!!\n"); |
| return 1; |
| } |
| #endif /* CONFIG_GROUPER_MAX77663 */ |
| #endif /* CONFIG_CMD_POWEROFF */ |
| |
| /* |
| * Routine: pinmux_init |
| * Description: Do individual peripheral pinmux configs |
| */ |
| void pinmux_init(void) |
| { |
| pinmux_config_pingrp_table(grouper_pinmux_common, |
| ARRAY_SIZE(grouper_pinmux_common)); |
| |
| pinmux_config_drvgrp_table(grouper_padctrl, |
| ARRAY_SIZE(grouper_padctrl)); |
| } |
| |
| #ifdef CONFIG_MMC_SDHCI_TEGRA |
| static void __maybe_unused tps65911_voltage_init(void) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev); |
| if (ret) { |
| log_debug("cannot find PMIC I2C chip\n"); |
| return; |
| } |
| |
| /* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */ |
| ret = dm_i2c_reg_write(dev, TPS65911_REG_LDO1, 0xC9); |
| if (ret) |
| log_debug("vcore_emmc set failed: %d\n", ret); |
| } |
| |
| static void __maybe_unused max77663_voltage_init(void) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev); |
| if (ret) { |
| log_debug("cannot find PMIC I2C chip\n"); |
| return; |
| } |
| |
| /* 0x60 for 1.8v, bit7:0 = voltage */ |
| ret = dm_i2c_reg_write(dev, MAX77663_REG_SD2, 0x60); |
| if (ret) |
| log_debug("vdd_1v8_vio set failed: %d\n", ret); |
| |
| /* 0xEC for 3.00v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ |
| ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO3, 0xEC); |
| if (ret) |
| log_debug("vcore_emmc set failed: %d\n", ret); |
| } |
| |
| /* |
| * Routine: pin_mux_mmc |
| * Description: setup the MMC muxes, power rails, etc. |
| */ |
| void pin_mux_mmc(void) |
| { |
| #ifdef CONFIG_GROUPER_MAX77663 |
| /* Bring up eMMC power on MAX PMIC */ |
| max77663_voltage_init(); |
| #endif |
| |
| #ifdef CONFIG_GROUPER_TPS65911 |
| /* Bring up eMMC power on TI PMIC */ |
| tps65911_voltage_init(); |
| #endif |
| } |
| #endif /* MMC */ |
| |
| #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| /* Remove TrustZone nodes */ |
| fdt_del_node_and_alias(blob, "/firmware"); |
| fdt_del_node_and_alias(blob, "/reserved-memory/trustzone@bfe00000"); |
| |
| return 0; |
| } |
| #endif |