i2c: Drop CONFIG_SH_SH7734_I2C
Last user of this driver went away in May 2017 in commit
eb5ba3aefdf0f6c ("i2c: Drop use of CONFIG_I2C_HARD").
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Acked-by: Heiko Schocher <hs@denx.de>
diff --git a/doc/driver-model/i2c-howto.txt b/doc/driver-model/i2c-howto.txt
index 1b2c531..8ba2f6e 100644
--- a/doc/driver-model/i2c-howto.txt
+++ b/doc/driver-model/i2c-howto.txt
@@ -14,7 +14,6 @@
ppc4xx_i2c
rcar_i2c
sh_i2c
- sh_sh7734_i2c
soft_i2c
zynq_i2c
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 4cf5c51..da368cc 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -9,7 +9,6 @@
obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
-obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
obj-$(CONFIG_SYS_I2C) += i2c_core.o
obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
diff --git a/drivers/i2c/sh_sh7734_i2c.c b/drivers/i2c/sh_sh7734_i2c.c
deleted file mode 100644
index 6fe356b..0000000
--- a/drivers/i2c/sh_sh7734_i2c.c
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * NOTE: This driver should be converted to driver model before June 2017.
- * Please see doc/driver-model/i2c-howto.txt for instructions.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-struct sh_i2c {
- u8 iccr1;
- u8 iccr2;
- u8 icmr;
- u8 icier;
- u8 icsr;
- u8 sar;
- u8 icdrt;
- u8 icdrr;
- u8 nf2cyc;
- u8 __pad0;
- u8 __pad1;
-};
-
-static struct sh_i2c *base;
-static u8 iccr1_cks, nf2cyc;
-
-/* ICCR1 */
-#define SH_I2C_ICCR1_ICE (1 << 7)
-#define SH_I2C_ICCR1_RCVD (1 << 6)
-#define SH_I2C_ICCR1_MST (1 << 5)
-#define SH_I2C_ICCR1_TRS (1 << 4)
-#define SH_I2C_ICCR1_MTRS \
- (SH_I2C_ICCR1_MST | SH_I2C_ICCR1_TRS)
-
-/* ICCR1 */
-#define SH_I2C_ICCR2_BBSY (1 << 7)
-#define SH_I2C_ICCR2_SCP (1 << 6)
-#define SH_I2C_ICCR2_SDAO (1 << 5)
-#define SH_I2C_ICCR2_SDAOP (1 << 4)
-#define SH_I2C_ICCR2_SCLO (1 << 3)
-#define SH_I2C_ICCR2_IICRST (1 << 1)
-
-#define SH_I2C_ICIER_TIE (1 << 7)
-#define SH_I2C_ICIER_TEIE (1 << 6)
-#define SH_I2C_ICIER_RIE (1 << 5)
-#define SH_I2C_ICIER_NAKIE (1 << 4)
-#define SH_I2C_ICIER_STIE (1 << 3)
-#define SH_I2C_ICIER_ACKE (1 << 2)
-#define SH_I2C_ICIER_ACKBR (1 << 1)
-#define SH_I2C_ICIER_ACKBT (1 << 0)
-
-#define SH_I2C_ICSR_TDRE (1 << 7)
-#define SH_I2C_ICSR_TEND (1 << 6)
-#define SH_I2C_ICSR_RDRF (1 << 5)
-#define SH_I2C_ICSR_NACKF (1 << 4)
-#define SH_I2C_ICSR_STOP (1 << 3)
-#define SH_I2C_ICSR_ALOVE (1 << 2)
-#define SH_I2C_ICSR_AAS (1 << 1)
-#define SH_I2C_ICSR_ADZ (1 << 0)
-
-#define IRQ_WAIT 1000
-
-static void sh_i2c_send_stop(struct sh_i2c *base)
-{
- clrbits_8(&base->iccr2, SH_I2C_ICCR2_BBSY | SH_I2C_ICCR2_SCP);
-}
-
-static int check_icsr_bits(struct sh_i2c *base, u8 bits)
-{
- int i;
-
- for (i = 0; i < IRQ_WAIT; i++) {
- if (bits & readb(&base->icsr))
- return 0;
- udelay(10);
- }
-
- return 1;
-}
-
-static int check_stop(struct sh_i2c *base)
-{
- int ret = check_icsr_bits(base, SH_I2C_ICSR_STOP);
- clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
-
- return ret;
-}
-
-static int check_tend(struct sh_i2c *base, int stop)
-{
- int ret = check_icsr_bits(base, SH_I2C_ICSR_TEND);
-
- if (stop) {
- clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
- sh_i2c_send_stop(base);
- }
-
- clrbits_8(&base->icsr, SH_I2C_ICSR_TEND);
- return ret;
-}
-
-static int check_tdre(struct sh_i2c *base)
-{
- return check_icsr_bits(base, SH_I2C_ICSR_TDRE);
-}
-
-static int check_rdrf(struct sh_i2c *base)
-{
- return check_icsr_bits(base, SH_I2C_ICSR_RDRF);
-}
-
-static int check_bbsy(struct sh_i2c *base)
-{
- int i;
-
- for (i = 0 ; i < IRQ_WAIT ; i++) {
- if (!(SH_I2C_ICCR2_BBSY & readb(&base->iccr2)))
- return 0;
- udelay(10);
- }
- return 1;
-}
-
-static int check_ackbr(struct sh_i2c *base)
-{
- int i;
-
- for (i = 0 ; i < IRQ_WAIT ; i++) {
- if (!(SH_I2C_ICIER_ACKBR & readb(&base->icier)))
- return 0;
- udelay(10);
- }
-
- return 1;
-}
-
-static void sh_i2c_reset(struct sh_i2c *base)
-{
- setbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST);
-
- udelay(100);
-
- clrbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST);
-}
-
-static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg)
-{
- if (check_bbsy(base)) {
- puts("i2c bus busy\n");
- goto fail;
- }
-
- setbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
- clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY);
-
- writeb((id << 1), &base->icdrt);
-
- if (check_tend(base, 0)) {
- puts("TEND check fail...\n");
- goto fail;
- }
-
- if (check_ackbr(base)) {
- check_tend(base, 0);
- sh_i2c_send_stop(base);
- goto fail;
- }
-
- writeb(reg, &base->icdrt);
-
- if (check_tdre(base)) {
- puts("TDRE check fail...\n");
- goto fail;
- }
-
- if (check_tend(base, 0)) {
- puts("TEND check fail...\n");
- goto fail;
- }
-
- return 0;
-fail:
-
- return 1;
-}
-
-static int
-i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 *val, int size)
-{
- int i;
-
- if (i2c_set_addr(base, id, reg)) {
- puts("Fail set slave address\n");
- return 1;
- }
-
- for (i = 0; i < size; i++) {
- writeb(val[i], &base->icdrt);
- check_tdre(base);
- }
-
- check_tend(base, 1);
- check_stop(base);
-
- udelay(100);
-
- clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
- clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
- sh_i2c_reset(base);
-
- return 0;
-}
-
-static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
-{
- u8 ret = 0;
-
- if (i2c_set_addr(base, id, reg)) {
- puts("Fail set slave address\n");
- goto fail;
- }
-
- clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY);
- writeb((id << 1) | 1, &base->icdrt);
-
- if (check_tend(base, 0))
- puts("TDRE check fail...\n");
-
- clrsetbits_8(&base->iccr1, SH_I2C_ICCR1_TRS, SH_I2C_ICCR1_MST);
- clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
- setbits_8(&base->icier, SH_I2C_ICIER_ACKBT);
- setbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD);
-
- /* read data (dummy) */
- ret = readb(&base->icdrr);
-
- if (check_rdrf(base)) {
- puts("check RDRF error\n");
- goto fail;
- }
-
- clrbits_8(&base->icsr, SH_I2C_ICSR_STOP);
- udelay(1000);
-
- sh_i2c_send_stop(base);
-
- if (check_stop(base)) {
- puts("check STOP error\n");
- goto fail;
- }
-
- clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS);
- clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE);
-
- /* data read */
- ret = readb(&base->icdrr);
-
-fail:
- clrbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD);
-
- return ret;
-}
-
-#ifdef CONFIG_I2C_MULTI_BUS
-static unsigned int current_bus;
-
-/**
- * i2c_set_bus_num - change active I2C bus
- * @bus: bus index, zero based
- * @returns: 0 on success, non-0 on failure
- */
-int i2c_set_bus_num(unsigned int bus)
-{
- switch (bus) {
- case 0:
- base = (void *)CONFIG_SH_I2C_BASE0;
- break;
- case 1:
- base = (void *)CONFIG_SH_I2C_BASE1;
- break;
- default:
- printf("Bad bus: %d\n", bus);
- return -1;
- }
-
- current_bus = bus;
-
- return 0;
-}
-
-/**
- * i2c_get_bus_num - returns index of active I2C bus
- */
-unsigned int i2c_get_bus_num(void)
-{
- return current_bus;
-}
-#endif
-
-void i2c_init(int speed, int slaveaddr)
-{
-#ifdef CONFIG_I2C_MULTI_BUS
- current_bus = 0;
-#endif
- base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0;
-
- if (speed == 400000)
- iccr1_cks = 0x07;
- else
- iccr1_cks = 0x0F;
-
- nf2cyc = 1;
-
- /* Reset */
- sh_i2c_reset(base);
-
- /* ICE enable and set clock */
- writeb(SH_I2C_ICCR1_ICE | iccr1_cks, &base->iccr1);
- writeb(nf2cyc, &base->nf2cyc);
-}
-
-/*
- * i2c_read: - Read multiple bytes from an i2c device
- *
- * The higher level routines take into account that this function is only
- * called with len < page length of the device (see configuration file)
- *
- * @chip: address of the chip which is to be read
- * @addr: i2c data address within the chip
- * @alen: length of the i2c data address (1..2 bytes)
- * @buffer: where to write the data
- * @len: how much byte do we want to read
- * @return: 0 in case of success
- */
-int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
-{
- int i = 0;
- for (i = 0; i < len; i++)
- buffer[i] = i2c_raw_read(base, chip, addr + i);
-
- return 0;
-}
-
-/*
- * i2c_write: - Write multiple bytes to an i2c device
- *
- * The higher level routines take into account that this function is only
- * called with len < page length of the device (see configuration file)
- *
- * @chip: address of the chip which is to be written
- * @addr: i2c data address within the chip
- * @alen: length of the i2c data address (1..2 bytes)
- * @buffer: where to find the data to be written
- * @len: how much byte do we want to read
- * @return: 0 in case of success
- */
-int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len)
-{
- return i2c_raw_write(base, chip, addr, buffer, len);
-}
-
-/*
- * i2c_probe: - Test if a chip answers for a given i2c address
- *
- * @chip: address of the chip which is searched for
- * @return: 0 if a chip was found, -1 otherwhise
- */
-int i2c_probe(u8 chip)
-{
- u8 byte;
- return i2c_read(chip, 0, 0, &byte, 1);
-}