powerpc/km8360: fix the ODT parameters for CS0
The ODT parameters for km8360 set the ODT_WR_ACS bit in u-boot KM-2011.09
that is used in the release bootpackage for kmcoge5ne. During the
transition from the kmeter1 to km8360 this was changed to
ODT_RD_ONLY_CURRENT, which is uncorrect and causes faulty RAM accesses at
low temperatures.
This is now changed to ODT_WR_ONLY_CURRENT which is the equivalent of
ODT_WR_ACS.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
diff --git a/include/configs/km8360.h b/include/configs/km8360.h
index c517e78..49b9200 100644
--- a/include/configs/km8360.h
+++ b/include/configs/km8360.h
@@ -99,7 +99,7 @@
#define CONFIG_SYS_DDR_CS0_CONFIG (\
CSCONFIG_EN | \
CSCONFIG_AP | \
- CSCONFIG_ODT_RD_ONLY_CURRENT | \
+ CSCONFIG_ODT_WR_ONLY_CURRENT | \
CSCONFIG_BANK_BIT_3 | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10)
@@ -107,7 +107,7 @@
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | \
- CSCONFIG_ODT_RD_ONLY_CURRENT)
+ CSCONFIG_ODT_WR_ONLY_CURRENT)
#endif
#define CONFIG_SYS_DDR_CLK_CNTL (\