powerpc: MPC8569: Remove macro CONFIG_MPC8569
Replace CONFIG_MPC8569 with ARCH_MPC8569 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 9545793..b58ccee 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -88,6 +88,7 @@
config TARGET_MPC8569MDS
bool "Support MPC8569MDS"
+ select ARCH_MPC8569
config TARGET_MPC8572DS
bool "Support MPC8572DS"
@@ -219,6 +220,9 @@
config ARCH_MPC8568
bool
+config ARCH_MPC8569
+ bool
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 390eede..9df1434 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -70,7 +70,7 @@
obj-$(CONFIG_ARCH_MPC8544) += mpc8544_serdes.o
obj-$(CONFIG_ARCH_MPC8548) += mpc8548_serdes.o
obj-$(CONFIG_ARCH_MPC8568) += mpc8568_serdes.o
-obj-$(CONFIG_MPC8569) += mpc8569_serdes.o
+obj-$(CONFIG_ARCH_MPC8569) += mpc8569_serdes.o
obj-$(CONFIG_MPC8572) += mpc8572_serdes.o
obj-$(CONFIG_P1010) += p1010_serdes.o
obj-$(CONFIG_P1011) += p1021_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index a7f43b6..3ac3580 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -707,7 +707,7 @@
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
#else
-#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\
+#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_P1010) ||\
defined(CONFIG_P1014)
gd->arch.sdhc_clk = gd->bus_clk;
#else
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index c3e1234..5f8881d 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -345,7 +345,7 @@
mtspr DBCR0,r0
#endif
-#ifdef CONFIG_MPC8569
+#ifdef CONFIG_ARCH_MPC8569
#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
@@ -376,7 +376,7 @@
tlbivax 0,r4
isync
-#endif /* CONFIG_MPC8569 */
+#endif /* CONFIG_ARCH_MPC8569 */
/*
* Search for the TLB that covers the code we're executing, and shrink it
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index c38d983..c162c9d 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -113,7 +113,7 @@
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
-#elif defined(CONFIG_MPC8569)
+#elif defined(CONFIG_ARCH_MPC8569)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index ec4c837..123dcad 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2210,7 +2210,7 @@
u32 gpiocr; /* GPIO control */
#endif
u8 res3[12];
-#if defined(CONFIG_MPC8569)
+#if defined(CONFIG_ARCH_MPC8569)
u32 plppar1; /* Platform port pin assignment 1 */
u32 plppar2; /* Platform port pin assignment 2 */
u32 plpdir1; /* Platform port pin direction 1 */
@@ -2484,7 +2484,7 @@
u32 svr; /* System version */
u8 res10[8];
u32 rstcr; /* Reset control */
-#if defined(CONFIG_ARCH_MPC8568) || defined(CONFIG_MPC8569)
+#if defined(CONFIG_ARCH_MPC8568) || defined(CONFIG_ARCH_MPC8569)
u8 res11a[76];
par_io_t qe_par_io[7];
u8 res11b[1600];