dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
index bca9183..1704627 100644
--- a/board/avionic-design/common/tamonten-ng.c
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -55,7 +55,7 @@
struct udevice *dev;
int ret;
- ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
+ ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, 1, &dev);
if (ret) {
debug("%s: Cannot find PMIC I2C chip\n", __func__);
return;
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index fc31d29..1540526 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -46,7 +46,7 @@
int ret;
int i;
- ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
if (ret) {
debug("%s: Cannot find PMIC I2C chip\n", __func__);
return;
@@ -94,7 +94,7 @@
u8 addr, data[1];
int err;
- err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
if (err) {
debug("failed to find PMU bus\n");
return err;
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index c0991c5..d7c1a69 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -55,7 +55,7 @@
uchar reg, data_buffer[1];
int ret;
- ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
if (ret) {
debug("%s: Cannot find PMIC I2C chip\n", __func__);
return;
@@ -83,7 +83,7 @@
data_buffer[0] = 0x03;
reg = 0x14;
- ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
+ ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, 1, &dev);
if (ret) {
debug("%s: Cannot find charger I2C chip\n", __func__);
return;
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index ad6ea09..3476f11 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -27,7 +27,7 @@
int ret;
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
- ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
+ ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
return;
@@ -64,7 +64,7 @@
*/
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
- ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
+ ret = i2c_get_chip_for_busnum(0, 0x20, 1, &dev);
if (ret) {
printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
return;
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index 1c4b4c1..6244214 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -42,7 +42,7 @@
u8 addr, data[1];
int err;
- err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
if (err) {
debug("%s: Cannot find PMIC I2C chip\n", __func__);
return err;